╔════════════════════════════════════════════════════════════════2624T.asc═══╗ ║ M2622/23/24T Jumper/Dip switch Location At-Bus Interface ║ ╠════════════════════════════════════════════════════════════════════════════╣ ║ ║ ║ Zylinder: 1435 (phys) Köpfe: 7/9/11 (phys) Capacity formatted: ║ ║ für DOS: 1013 10 326.57MB (Mio. ║ ║ 1002 13 420.16MB Bytes) ║ ║ 995 16 513.51MB ║ ║ Sektoren: 63 ║ ║ ║ ║ ┌────────────────────────────────────────────┐ ║ ║ ░ ┌7┬5┬3┬1┐ │ ║ ║ Power- ░ │ │ │ │ │CNH1 │ ║ ║ connector ░ SW1 └8┴6┴4┴2┘ │ ║ ║ ▓ ┌─────┐ │ ║ ║ ▓ │ 6 │ │ ║ ║ ▓ │ 5 │ │ ║ ║ ▓ │ 4 │ │ ║ ║ Interface- ▓ │ 3 │ ┌─┐ │ ║ ║ connector ▓ │ 2 │ └─┘ │ ║ ║ ▓ ON 1 │ LED │ ║ ║ ▓ └─────┘ connect. │ ║ ║ ▓ │ ║ ║ │ │ ║ ║ └────────────────────────────────────────────┘ ║ ║ ║ ║ SW1: 1 I/O Channel ready signal ║ ║ ON Output to pin 27 ║ ║ * OFF Not output to pin 27 ║ ║ 2 Spindle synch. output to interface ║ ║ ON Connected to Host interface ║ ║ * OFF Not connected to Host interface ║ ║ 3 ON Write protect on ║ ║ * OFF Write protect off * = Default setting ║ ║ 4 ON Fixed 7-byte ECC (Werkseinstellung) ║ ║ * OFF Fixed 4-byte ECC S = Shorted ║ ║ 5 ON Slave drive O = Open ║ ║ * OFF Master drive ║ ║ * 6 OFF for factory use ║ ║ ║ ║ CNH1: ║ ║ 1-2 3-4 Spindle sync 5-6 7-8 ║ ║ * O O not performed S S Factory reserved ║ ║ S O output mode ║ ║ S S input mode ║ ║ ║ ╚════════════════════════════════════════════════════════════════════════════╝