27-Nov-1993


	This OS2 driver for DTC3270 is a Beta version and has not passed the
	DTC verification process yet.

	To install the Host Adaptor device driver:

          A. If OS/2 2.0,2.1 system has not installed:

	    a. Backup the IBM OS2 2.x diskette 1 and use the newly copied
	       diskette for the following steps.
	    b. Add one line "basedev=dtc3270.add" before the line
	       "basedev=aha152x.add" in the file CONFIG.SYS of
	       IBM OS/2 2.0,2.1 diskette 1
	    c. Copy the file DTC3270.ADD from distribution diskette to
	       IBM OS/2 2.0,2.1 diskette 1
	    d. Install OS/2 2.0,2.1 according to the OS/2 installation guide.

          B. If OS/2 2.0,2.1 system has been installed:

	    a. If the user installs this device driver from floppy drive A:,
	       skip step b and proceed to c.
	    b. If the user installs this device driver from floppy drive B:,
	       modify the line "A:\3270PC.EXE" to "B:\3270PC.EXE" in the
	       DTC3270.DDP file of the distribution diskette.
	    c. Boot the OS/2 system.
	    d. After system Boot up complete, run "Device Driver Install" from
	       SYSTEM SETUP folder.
	       i) Select "Source directory" as A:\ or B:\ determined by which
	          floppy drive you use to install.
	       ii)Change "Destination directory" to C:\OS2, then install and
		  exit.

	Note!! This os/2 device driver is designed for dtc-3270/3280 host 
		adaptor which uses NCR53C400A scsi chip only.