Oct. 28, 1993
Installation notes:

Copy the files in this directory (NCRSDMS.SYS, NCRSDMS.TAG, OEMSETUP.INF,
and TXTSETUP.OEM) to the root directory of a floppy disk and follow the
SDMS installation procedures.

Below is a brief outline of the installation procedures.  Refer to the 
SDMS installation guide for specific actions.

New System Installation
=======================

1.  Boot NT from the Microsoft boot floppy.

2.  Press ENTER on the "Welcome to Setup" screen.

3.  On the "Setup Method" screen, choose "C" to do a CUSTOM INSTALLATION.

4.  After NT has scanned for SCSI adapters, choose "S" to CONFIGURE 
    ADDITIONAL SCSI ADAPTERS.

5.  Move the highlight bar to OTHER and press ENTER.

6.  When prompted, insert the floppy disk with the SDMS miniport driver 
    (with the four files mentioned above).

7.  The SDMS miniport driver should now be highlighted.  Press ENTER to 
    continue.

8.  NT should now recognize the SDMS miniport driver and the SCSI hardware.  
    At this point, simply follow the Microsoft Windows NT installation
    procedure.

Existing System Installation
============================

1.  Boot NT and log on as Administrator.

2.  Open the Main window in the Program Manager.

3.  Double click on the Windows NT Setup icon.

4.  Choose OPTIONS, then choose ADD/REMOVE SCSI ADAPTERS..., then choose ADD.

5.  On the SCSI Adapter list, go to the bottom and choose OTHER.

6.  When prompted, insert the floppy disk with the SDMS miniport driver 
    (with the four files mentioned above).  For the path to the files,
    leave "a:\" and select OK.

7.  On the Select OEM Option menu, the SDMS miniport driver should be
    highlighted.  If it is not highlighted, select it.  Choose OK.

8.  On the Select SCSI Adapter Option menu, choose INSTALL with the SDMS
    driver highlighted.

    At this point, the following message may occur:

    The driver(s) for this SCSI adapter are already on the system.  Do you
    want to use the currently installed driver(s) or install new one(s)?

    Selecting CURRENT will use the driver already on the system, and 
    selecting NEW will use the driver on the floppy disk.  Select NEW for
    this installation.  Either option leads to step 9.

9.  For the path to the OEM SCSI adapter files, leave "a:\" and select
    CONTINUE.

10. On the SCSI Adapter Setup menu, choose CLOSE.

11. Reboot to load the new driver.