=====================================
Adaptec EZ-SCSI 4.01 Upgrade Program
=====================================
Welcome to the Adaptec EZ-SCSI Upgrade program. This utility will upgrade
your Adaptec EZ-SCSI 4.x to Adaptec EZ-SCSI 4.01. You will need to install
the retail version of Adaptec EZ-SCSI 4.0 before running this utility. This
program is designed to run on Windows 95 and NT operating systems.
=====================
Upgrade requirement
=====================
To run this upgrade you must own and have installed Adaptec EZ-SCSI 4.0
(Full or Licensed).
NOTE: Users of Adaptec EZ-SCSI 3.x, and earlier, can upgrade to Adaptec
EZ-SCSI 4.0 by calling one of the following numbers:
Software Ordering (U.S.A. and Cananda) (800) 442-7274
M-F: 6:00am to 5:00pm Pacific Standard Time
International Software Ordering (408) 957-7274
M-F: 6:00am to 5:00pm Pacific Standard Time
Software Ordering (Germany) 0130 828022
M-F: 9:00 to 18:00
Software Ordering (France) 05 90 77 04
M-F: 9:00 to 18:00
Software Ordering (United Kingdom) 0800 966526
M-F: 9:00 to 18:00
Software Ordering (Europe, other) +32 11 300 379
M-F: 9:00 to 18:00
===================
Troubleshooting
===================
If the upgrade is not successful, please check the following:
1.) Make sure there are no other SCSI applications resident. If there are,
please exit all running applications and try the upgrade again.
2.) If the upgrade indicates that you do not have EZ-SCSI 4.0 (Full or
Licensed) installed on your system, make sure you have Adaptec EZ-SCSI
4.0 installed. This upgrade program is not intended for Adaptec EZ-SCSI
Lite 4.0.
3.) If the upgrade indicates that you do not have EZ-SCSI 4.0 installed,
but you know it's installed, this may be caused by your having renamed
or moved the EZ-SCSI installation. If you experience this, please re-
install Adaptec EZ-SCSI 4.0 and then run the EZ-SCSI 4.0 upgrade program
again.
4.) Make sure you have at least 5 MBytes of free space on your hard drive.
