=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Adaptec 7800 Family Manager Set v3.01 for NetWare
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Welcome to Adaptec 7800 Family Manager Set v3.01
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
The following information is available in this README file:
o Supported Hardware
o Changes From Prior Release
o Installation Instructions
Installing an Ultra2 Host Adapter and NetWare v3.12 for the First Time
Installing an Ultra2 Host Adapter and NetWare v4.xx for the First Time
Installing the DSK Driver When Installing NetWare v3.12 for the First
Time
Installing an Ultra2 Host Adapter in an Existing NetWare v3.12
Installation
Installing the Driver in an Existing NetWare v4.xx Installation
Loading the Driver at Server Bootup
o Known Issues
o Additional Notes
o Command Line Options
o Diskette Contents
o Contacting Adaptec
=-=-=-=-=-=-=-=-=-=
Supported Hardware
=-=-=-=-=-=-=-=-=-=
The following Adaptec SCSI Host Adapters are supported by the 7800 FMS v3.01.
The first list (Fast/Ultra Adapters) is supported by the AIC7870.DSK driver,
while the second list (Ultra2 Adapters) is supported by the AIC78U2.HAM
driver.
Fast/Ultra Adapters Description
------------------- -----------
AHA-2910C PCI-to-Fast SCSI (non-bootable)
AHA-2915C PCI-to-Fast SCSI (non-bootable)
AHA-2920C PCI-to-Fast SCSI
AHA-2930C PCI-to-Ultra Single-ended SCSI
AHA-2940 PCI-to-Fast SCSI
AHA-2940W PCI-to-Fast and Wide Single-ended SCSI
AHA-2940AU PCI-to-Ultra Single-ended SCSI
AHA-2940U PCI-to-Ultra Single-ended SCSI
AHA-2940U Dual DualChannel PCI-to-Ultra Internal Single-ended
SCSI with 50-pin external connector
AHA-2940UW PCI-to-Ultra Wide Single-ended SCSI
AHA-2940UW Dual DualChannel PCI-to-Ultra Wide Single-ended
SCSI with Wide external connector
AHA-2944W PCI-to-Fast and Wide Differential SCSI
AHA-2944UW PCI-to-Ultra Wide Differential SCSI
AHA-3940 MultiChannel PCI-to-Fast SCSI
AHA-3940W MultiChannel PCI-to-Fast and Wide SCSI
AHA-3940U MultiChannel PCI-to-Ultra SCSI
AHA-3940UW MultiChannel PCI-to-Ultra Wide SCSI
AHA-3940UWD MultiChannel PCI-to-Ultra Wide SCSI with dual
external connectors
AHA-3944UWD MultiChannel PCI-to-Ultra Wide Differential SCSI
with dual external connectors
AHA-3940AU MultiChannel PCI-to-Ultra SCSI
AHA-3940AUW MultiChannel PCI-to-Ultra Wide SCSI
AHA-3940AUWD MultiChannel PCI-to-Ultra Wide SCSI with dual
external connectors
AHA-3944AUWD MultiChannel PCI-to-Ultra Wide Differential SCSI
with dual external connectors
AHA-4944W Quad Channel PCI-to-Fast and Wide Differential SCSI
AHA-4944UW Quad Channel PCI-to-Ultra Wide Differential SCSI
AIC-7850 Single-chip PCI-to-Fast SCSI
AIC-7855 Single-chip PCI-to-Fast SCSI
AIC-7856 Single-chip PCI-to-Fast SCSI
AIC-7860 Single-chip PCI-to-Ultra SCSI
AIC-7870 Single-chip PCI-to-Fast and Wide SCSI
AIC-7880 Single-chip PCI-to-Ultra Wide SCSI
AIC-7895 Single-chip PCI-to-MultiChannel Ultra Wide SCSI
Ultra2 Adapters Description
-------------- -----------
AHA-2940U2 OEM PCI-to-Ultra2 Wide LVD/Single-ended SCSI
AHA-2940U2B PCI-to-Ultra2 Wide LVD SCSI
AHA-2940U2W PCI-to-Ultra2 Wide LVD/Single-ended SCSI
AHA-3950U2B MultiChannel 64-bit PCI-to-Ultra2 SCSI
AIC-7890 Single-chip PCI-to-Ultra2 Wide SCSI
AIC-7896 Single-chip PCI-to-MultiChannel Ultra2 SCSI
AIC-7897 Single-chip 64-bit PCI-to-MultiChannel Ultra2 SCSI
=-=-=-=-=-=-=-=-=-=-=-=-=-=
Changes From Prior Release
=-=-=-=-=-=-=-=-=-=-=-=-=-=
Adaptec 7800 Family Manager Set v3.01 features enhancements from
the previous v3.00 version. These features include:
o Support for a wider variety of Ultra2SCSI PCI IC's and Adaptec host
adapters
o Support for NetWare NWPA
=-=-=-=-=-=-=-=-=-=-=-=-=-=
Installation Instructions
=-=-=-=-=-=-=-=-=-=-=-=-=-=
This section explains how to install the Adaptec 7800 Family Manager Set
v3.01 Driver AIC7870.DSK (UltraSCSI) or AIC78U2.HAM (Ultra2SCSI) for Novell
NetWare - NetWare v3.1x, v4.0, and v4.1x.
If you are performing a first time NetWare installation, see Installing the
Driver When Installing NetWare. If NetWare is already installed in your
system, see Installing the Driver When NetWare is Already Installed, below.
Installing an Ultra2 Host Adapter and NetWare v3.12 for the First Time
----------------------------------------------------------------------
1. Create the DOS partition and/or install DOS from the Setup diskette.
2. Insert EZ-SCSI v4.03 (or greater) for Windows 3.1x and DOS Setup
diskette in drive A.
3. Go to drive A: and type DOSINST.
4. Install the EZ-SCSI software to access the CD-ROM. You will need
a DOS version of MSCDEX.EXE and will be prompted to install the file
if it is not in your DOS directory.
5. Reboot your system after install.
6. Start the NetWare 3.12 installation.
(i.e., D:\netware.312\english\install)
7. After NetWare installs the DOS portion of the software, DOWN and
EXIT to DOS from the server prompt.
8. Copy the AIC78U2.HAM and AIC78U2.DDI from the NETWARE directory of the
7800 Family Manager Set diskette to the C:\server.312 directory.
9. Obtain the NWPA_UP.EXE patch from the Novell Web site
(http://developer.novell.com/devres/sas/certinfo.htm)
10. Change directory to c:\server.312, and copy the patch file NWPA_UP.EXE
to the directory.
11. Run NWPA_UP.EXE (note: this will create another file, 312PTC.EXE.
Answer Y to the prompt to overwrite CDROM.NLM.)
12. Run 312PTC.EXE.
13. Create the directory c:\server.312\CDSAVE
14. Copy CDROM.NLM to c:\server.312\CDSAVE
15. Update the server with the following command from the DOS prompt
[312PTC\native\loader\lswap c:\server.312\312PTC\native\loader\
loader.exe c:\server.312\server.exe]
16. Create the file Startup.ncf in the c:\server.312 directory using EDIT
or a text editor with the following lines:
load c:\server.312\312PTC\native\start\npapatch
load c:\server.312\mmattrfx
load c:\server.312\nbi31x
load c:\server.312\AIC78U2
17. Run SERVER.EXE.
18. Note the slot number detected for the Ultra2 adapter. This can be
added to the Startup.ncf load AIC78U2 statement to automate driver
load using the parameter:
SLOT=x (x is the detected slot number).
19. Load Install. Create the NetWare partition, SYS volume, and mount the
volume. Complete the installation of the System and Public Files.
20. Create the Autoexec.NCF file. Add the following lines and save
load after311
load c:\server.312\nwpaload
search add 1 c:\server.312\cdsave
load cdrom
21. Load, from the console prompt, the following command
load c:\server.312\312PTC\patch312
22. Install the patches from the c:\server.312\312PTC directory
23. DOWN and EXIT the server
24. Run SERVER.EXE
25. Installation of the Ultra2 adapter for NetWare 3.12 is complete.
Installing an Ultra2 Host Adapter and NetWare v4.xx for the First Time
----------------------------------------------------------------------
Follow these instructions only if you are installing NetWare 4.0 or v4.1x
for the first time:
1. Begin installation of NetWare v4.0 or v4.1x on your server as
instructed in your NetWare documentation.
2. When a screen appears that asks you to select a disk driver, press
INS.
3. Insert the Adaptec 7800 Family Manager Set v3.01 diskette for NetWare
into your floppy drive.
4. Press F3 and specify the path to the AIC78U2.HAM driver for NetWare
(e.g., a:\netware on the diskette).
5. Select AIC78U2.HAM and press ENTER.
6. When "Choose the Server Driver - Disk Driver Parameters" appears,
select "Save Parameters and Continue".
7. When "Install addition driver" appears, select "YES" if installing
more than one host adapter or installing a dual-channel host adapter,
and repeat step 5 & 6 until one driver is chosen for each host
adapter; otherwise, select "NO".
8. Select "Continue with Installation" to continue the installation.
9. You will be prompted to confirm slot option, press "Enter" to
select the slot number. Repeat until all slot options are loaded.
10. Select "Continue with Installation" to complete the installation.
(NOTE: To load the driver automatically at server bootup, make sure
the STARTUP.NCF file includes the load command line for your host
adapter. See "Loading the Driver at Server Bootup", below.)
Installing the DSK Driver When Installing NetWare v3.12 for the First Time
--------------------------------------------------------------------------
Follow these instructions only if you are installing NetWare v3.1x for the
first time:
1. Follow the procedures in your NetWare documentation for installing a
new server.
2. When you see the NetWare colon prompt (:), use the load command to
install the driver from the Adaptec 7800 Family Manager Set v3.01
diskette for NetWare.
The correct syntax to load the 7800 Family driver is
:load [pathname]aic7870 [options]
The command line options are not case sensitive. Placing commas
between command line options is optional. See Command Line Options
below for possible values.
(NOTE: The ASPITRAN.DSK file must reside in the same path as
AIC7870.DSK, because NetWare attempts to load the file automatically.)
(NOTE: To load the driver automatically at server bootup, copy the
driver to the server's startup directory and modify the STARTUP.NCF
file. See Installing the Driver When NetWare is Already Installed and
Loading the Driver at Server Bootup, below)
3. Load the NetWare install program from the NetWare colon prompt
(:load install). Follow the instructions in the NetWare
documentation to complete the installation (e.g., creating disk
partitions, system volumes, etc.) of your server.
Installing the DSK Driver When Installing NetWare v4.xx for the First Time
--------------------------------------------------------------------------
Follow these instructions only if you are installing NetWare 4.0 or v4.1x
for the first time:
1. Begin installation of NetWare v4.0 or v4.1x on your server as
instructed in your NetWare documentation.
2. When a screen appears that asks you to select a disk driver, press
F10.
3. When "Choose the Server Drivers - Summary" appears, press Enter.
4. Move highlight to "Disk and CD-ROM Drivers" and press Enter.
5. Deselect all "AIC7870" drivers that are picked up by Netware.
6. Highlight "Select an additional driver" and press Enter.
7. When a screen appears that asks you to select a disk driver, press
Ins.
8. Insert the Adaptec 7800 Family Manager Set v3.01 diskette for NetWare
into your floppy drive.
9. Press F3 and specify the path to the AIC7870.DSK driver for NetWare
(e.g., a:\netware\v4_xx on the diskette).
10. Select AIC7870.DSK and press ENTER.
11. Select "Continue installation" to complete the installation.
(NOTE: To load the driver automatically at server bootup, make sure
the STARTUP.NCF file includes the load command line for your host
adapter. See "Loading the Driver at Server Bootup", below.)
Installing an Ultra2 Host Adapter in an existing NetWare v3.12 installation
---------------------------------------------------------------------------
1. Download NWPA_UP.exe from this site:
http://developer.novell.com/devres/sas/certinfo.htm.
2. Copy NWPA_UP.EXE to c:\Server.312 directory.
3. Change to that directory.
4. Run NWPA_UP.EXE from the same directory. Answer Y when prompted to
overwrite CDROM.NLM.
(Note: If NetWare has already been updated with the latest patch
file, 312PTC.EXE, you will be prompted to overwrite the file.
Answer N)
5. Delete NBI.NLM from the c:\server.312 directory.
6. If 312PTC has not been installed previously, run 312PTC.EXE from
the same directory.
7. Create the directory c:\Server.312\CDSAVE
8. Copy the CDROM.NLM to the C:\Server.312\CDSAVE
9. Copy the AIC78U2.HAM and AIC78U2.DDI file to the C:\Server.312
directory from the 7800 Family Manager Set NetWare directory.
10. Update the Server with the following command:
[312PTC\native\loader\lswap c:\server.312\312PTC\native\loader\
loader.exe c:\server.312\server.exe]
11. From the prompt type: server
12. Load install
13. Edit the STARTUP.NCF file. Remark out "Load CDROM" statement.
14. Enter the following lines after lines already present and save:
load \native\start\npapatch
load mmattrfx
load nbi31x
load AIC78U2
15. Edit the Autoexec.NCF file, add the following lines after lines
already present, then save the file:
load after311
load c:\server.312\nwpaload
search add 1 c:\server.312\cdsave
load cdrom
16. At the console prompt enter the following command:
load c:\server.312\312PTC\Patch312
17. Install the patches from the c:\server.312\312PTC directory
18. Down and EXIT the server.
19. Reboot the server. (Note: Note the slot number prompt of the AIC78U2.
Edit the Startup.NCF file load AIC78U2 command with the parameter
slot=x (x is the slot number) for autoload of the driver.)
20. Installation complete.
Installing the Driver in an Existing NetWare v4.xx Installation
---------------------------------------------------------------
To update or install the AIC7870.DSK or AIC78U2.HAM driver when NetWare v4.xx
is already installed, follow the instructions in this section. The procedures
are similar for all versions of NetWare. Procedures that are specific to a
NetWare version are noted when necessary.
1. Make a backup copy of the old driver (if it exists) before installing
the new driver.
2. Copy the AIC7870.DSK or AIC78U2.HAM driver from the 7800 Family Manager
Set v3.01 diskette for NetWare into the server's startup directory
(e.g. c:\nwserver, c:\server.40, etc.) on your hard disk. This
overwrites any existing version of the driver in the directory.
(NOTE: For NetWare v4.xx, the driver file is located in the
\netware\v4_xx directory on the diskette.)
3. If necessary, modify the load command line in the STARTUP.NCF so that
the proper path to the driver and all appropriate command line
options are specified. See the "Loading the Driver at Server Bootup
and Command Line Options sections, below.)
The correct syntax to load the 7800 Family Manager driver is:
load [pathname]aic7870 [options]
or
load [pathname]aic78u2 [options]
Command line options are not case sensitive. Placing commas between
command line options is optional. See "Command Line Options", below,
for possible values.
Loading the Driver at Server Bootup
-----------------------------------
To automatically load the AIC7870.DSK or AIC78U2.HAM at server bootup, the
STARTUP.NCF file (usually located in your server's startup directory) must
contain a load command line that specifies the location of the driver and any
appropriate command line options (see Command Line Options, below).
For additional information on the STARTUP.NCF file, refer to your NetWare
documentation.
(NOTE: To load the driver from your hard disk, the AIC7870.DSK driver and
ASPITRAN.DSK module must be copied from the Adaptec 7800 Family Manager Set
v3.01 diskette for NetWare to a directory on your hard disk [usually the
server's startup directory (e.g., c:\nwserver)]).
The correct syntax to load the driver is
load [pathname]aic7870 [options]
or
load [pathname]aic78u2 [options]
For example, the command line to load the driver from the c:\nwserver
directory, with the "verbose=" option on is
load c:\nwserver\aic7870 verbose=y
or
load c:\nwserver\aic78u2 verbose=y
Command line options are not case sensitive. Placing commas between command
line options is optional. See Command Line Options, below, for possible
values.
To modify the STARTUP.NCF file, follow these steps:
(NOTE: You can also use your DOS text editor to modify the STARTUP.NCF
file.)
1 Type load install at the NetWare prompt and press ENTER.
2 Select the appropriate menu choice that allows you to edit the
STARTUP.NCF file.
3 Make the necessary changes. When you are done, press ESC.
=-=-=-=-=-=-=
Known Issues
=-=-=-=-=-=-=
o There is a known problem which occurs during the installation of Netware
4.0X, that involves the DDI file used during the initialization of the
host adapter device driver. The DDI file does not contain all the
possible slot number options available on all PCI systems, as there are
too many combinations. As a result, during the installation procedure,
NetWare will report that it is unable to load the driver in the given
amount of time. This is because the DDI file does not contain any
slot options, which causes NetWare not to load the driver. Note, however,
that this is not an error. The user simply needs to go to the console
screen and manually enter in the correct slot number and installation
will continue.
o A second known problem exists that will hang the server after loading the
host adapter device driver. This problem involves targets that do not
support scanning of multiple luns, with the command line option
lun_enable. The user simply needs to set the command line option
multlun_targets to only scan targets that support multiple luns. This
problem is known to occur with Quantum Empire 540S drives.
o Novell recommends not using IRQ 15 for host adapters. If your system
bios allows the assignment of IRQs, change your adapters IRQ to a value
other than 15.
o On NetWare 4.11, without media in the CD-ROM drive, and using built in
driver support for CD-ROMs, the message "No CD-ROM Devices Registered
with NetWare." is reported, if "cd device list" is issued.
o There is a known problem with some hard drives that are less than or
equal to 1 GB. If these drives were previously formatted using the
Adaptec 7800 Family Manager Set v2.1x driver for Netware, and are now
being upgraded to the 7800 Family Manager Set v3.01 driver, the user
may have problems in finding the device during initialization. If
this occurs, use the following command line option in your STARTUP.NCF
file:
ext_tran=n
o On some system configurations and during a first time installation or
when upgrading to the 7800 Family Manager Set v3.01 driver, the user
may see a window with the following warning message:
"One or more partitions on drive 0 are inconsistent with the driver
geometries (xxx heads, xx sectors, and xxx cylinders) that NetWare
is using. You may continue and edit the partition anyway, although
this inconsistency could create problems later on."
This message is shown when the "Installation Options" window appears,
and the user highlights and selects "Disk Options", followed by "Modify
Disk Partitions and Hot Fix". The user should simply continue to the
"Disk Partitions Options" window to edit the partition, and installation
will complete successfully.
o The AIC78U2.HAM driver will not load if older versions of the NWPA.NLM
file have been used. To fix this problem, use the updated version of
the NWPA.NLM file that is included in this diskette. (#12046, #12140,
#12268)
o The AIC78U2.HAM driver requires a minimum of 16 MB of memory. (#12459)
o When starting a NetWare server with two Ultra2 host adapters, the
error message "Unbound Device Object" might appear. Manually unloading
and reloading the driver will fix the problem, as well as removing
the "slot=xx" option in the STARTUP.NCF file (and then selecting the
default slot number(s)). This is being addressed by Novell. (#13343)
o When loading server.exe with the ""load aic78u2.ham slot=# lun_enable""
switch, the server locks up while scanning the LUNs. This is
being addressed by Novell. (#13135)
o On some SMP systems, if the IRQ setting is set to "Auto" in the
system's BIOS then NW 4.11 installation will hang at loading a NIC
driver. This problem was tested with a Tyan P5 SMP, and it did
show up. The problem did not show up on the DEC SMP system. This is
being addressed by Novell. (#12764)
o Certain systems will not run Sbackup under NetWare v3.12. NetWare
v4.11 runs it with no problems. This is a Novell issue which is
currently being addressed. (#12199)
o Some systems experienced problems loading NetWare when loading
the AIC7870.DSK and ASPICD.DSK drivers after the AIC78U2.HAM
driver. The workaround is to load the DSK drivers before the
HAM driver.
=-=-=-=-=-=-=-=-=
Additional Notes
=-=-=-=-=-=-=-=-=
o The Netware driver has been submitted for Novell Certification.
o All of Adaptec's NetWare drivers have full support for standard
SCSI disk drives, "NetWare Ready" drives, and removable media disk
drives (including optical drives).
o For NetWare patches and other latest information, reference the
Novell website at http://developer.novell.com/cgi-bin/devnet
o The AIC7870.DSK driver also contains a built-in ASPI manager. This
allows for other NetWare Loadable Modules (NLMs) to gain access to the host
adapter. Given the flexibility of ASPI, several companies are currently
providing server-based tape backup solutions through ASPI. SBackup is a
server based tape backup solution which is shipped by Novell with NetWare.
SBackup supports the ASPI interface. There are other ASPI modules already
developed or under development. A programming specification is available
from Adaptec if you are interested in writing your own NetWare 386 ASPI
module.
o If your file server does a lot of IO operations and you want to try
optimizing its performance, you can adjust the "max_tags=?" command
line switch. This switch controls the maximum number of tagged
commands outstanding at a given device. Refer to your disk-drive's
documentation to determine if tagged-queuing is supported, and the
maximum number of outstanding commands supported. Its default value
is 16.
The following are examples of how to change this feature:
For all 7800 Manager Set host adapters:
:load aic7870 max_tags=2
For UltraSCSI or earlier only host adapters:
:load aic7870 tag_disable=ffff
The first example shows how to use the max_tags command line option.
The max_tags parameter can be set between 1 and 128. Larger values
give the drives more opportunity for optimization, but take up more
memory in the server.
For several reasons, you may want to use a lower value of max_tags.
For some drives, maximum performance is achieved with
a max_tags less than the maximum supported by the drive.
Also, some drives may not support the driver's maximum count of 128,
or may suffer starvation problems with large counts, leading to
drive deactivation.
The second example applies only to the AIC7870.DSK driver. It turns
off tagged-queuing for all devices. This may be necessary for
starvation-prone drives.
o The Adaptec 7800 Family Manager Set v3.01 NetWare driver no longer
supports the slot=0 command line option. For the AIC7870.DSK driver,
if no slot is mentioned on the command line, the driver is loaded for
all host adapters present in the system. For the Ultra2SCSI AIC78U2.HAM
driver, if no slot is mentioned on the command line, the driver
prompts you for a valid slot number.
=-=-=-=-=-=-=-=-=-=-=
Command Line Options
=-=-=-=-=-=-=-=-=-=-=
(NOTE: Possible values for command line options can be enabled with ON, Y,
or 1 without distinction, or can be disabled with OFF, N, or 0.)
The following table shows driver command line options:
(NOTE: Those command line options indicated with an asterisk are specific
only for the AIC7870.DSK driver.)
OPTION DEFINITION POSSIBLE DEFAULT
VALUES VALUES
-----------------------------------------------------------------------------
auto_bus_fairness= Enable/disable auto SCSI OFF, ON ON
bus fairness algorithm
auto_disable_tagq= Enable/disable auto OFF, ON ON
disable tag queuing
algorithm
auto_flush_diskreq= Enable/disable auto disk OFF, ON ON
flush algorithm
bus_release= Passed to HIM --- ---
*
cdrom= Indicate if CDROM OFF (ASPI), ON
* devices are controlled by ON (Driver)
driver or ASPI
dev_enable= Bitmask which enables Hexadecimal FFFF (Scan
scanning on selected 0-FFFF all targets)
targets
edge_or_level= Determines edge or level --- ---
* triggered interrupt
ext_tran= Determine translation Y Standard, unless
* method for a new drive (Extended), set to extended
in the system; extended N (Standard) by SCSI-Select
or standard
fixed_disk= Indicate if fixed disks OFF (ASPI), ON
* are controlled by driver ON (Driver)
or ASPI
flush_diskreq= Send occasionally Hexadecimal 0 (Disabled for
ordered tags to targets 0-FFFF all targets)
instr= Enable/disable recording OFF (Disable), OFF
* of I/O statistics and ON (Enable)
errors
int Required by Netware --- ---
*
interrupt_level Sets interrupt level. Used --- ---
* if PCI config space is not
setup correctly by BIOS
io_combine= Maximum number of IO's 1 - 64 16
* that will be combined into (1-32 for
one using scatter/gather AIC7870.DSK)
lun_enable= LUN scan enable mask Hexadecimal 1 (Scan LUN
on all targets 0 - FF 0 only)
max_nontags= Maximum number of --- ---
* non-tagged I/Os that
will be active per
device
max_sectors= Maximum number of 1 - 256 256
* sectors that will be
combined using
scatter/gather. Max
value is
MaxRequestSize (128)
x IOCombine(64)
max_tags= Maximum number of 1 - 128 16
tagged I/O's which will
be active per device
mem Required by NetWare --- ---
*
multlun_targets= Bitmask that enables Hexadecimal FFFF (LUNs
LUNS on selected 0 - FFFF on all targets)
targets
pcimech Selects hardware --- ---
* mechanism to address
PCI registers
prompt= Prompt all available Y, N N
* slots to load the driver
on
read_after_write= Enable write with 0 (OFF), 1
* verify for writes 1 (ON)
removable= Indicate if removable OFF (ASPI), ON
* media is controlled ON (Driver)
by driver or ASPI
start_unit= Target id mask to send Hexadecimal 0 (No start
* start unit SCSI command 0 - FFFF unit cmd. to
any target)
tag_disable= Target tag queuing Hexadecimal 0 (Enabled for
* disable mask 0 - FFFF all targets)
verbose= Display host adapter Y, N N
settings
slot= Obtains a physical slot Dependent on If none
number for the host system specified,
adapter configuration driver loaded
for all
available slots
(AIC78U2.HAM -
NetWare prompts
user to choose)
Bit Mask Options
----------------
Use this example to aid in calculating bit mask options hex values. Each
SCSI device ID 0-7 (or 0-15 for wide host adapters) is enabled by a 1 in
its corresponding bit position. In this example, lun_enable=05 enables
scanning for LUNs 0 and 2 on all targets.
Bit Position
|-------------------------------------------------------|
SCSI ID | 15 14 13 12 | 11 10 09 08 | 07 06 05 04 | 03 02 01 00 |
|-------------------------------------------------------|
0, 2 | 0 0 0 0 | 0 0 0 0 | 0 0 0 0 | 0 1 0 1 |
|-------------------------------------------------------|
Converted | | | | |
binary to | | | | |
hex: | 0 | 0 | 0 | 5 | = 05h
|-------------------------------------------------------|
=-=-=-=-=-=-=-=-=
Diskette Contents
=-=-=-=-=-=-=-=-=
The following files are included in this diskette:
o AIC78U2.HAM - 7800 Family of Ultra2SCSI Host Adapters Driver for
NetWare NWPA
o AIC78U2.DDI - Driver definition information file for NetWare NWPA
o NBI.NLM - File required by the NetWare Bus Interface
o NWPA.NLM - File required by the NetWare Bus Interface
o CDROM.NLM - File required by the NetWare Bus Interface
o NWPALOAD.NLM - File required by the NetWare Bus Interface
o README.TXT - This file
In the \netware\v3_1x Directory
-------------------------------
o AIC7870.DSK - AIC-7870 Family of Host Adapters Driver For NetWare 386
v3.1x.
o ASPITRAN.DSK - ASPI Transport Layer Manager Driver for NetWare v3.1x.
o ASPICD.DSK - CD-ROM Driver for NetWare v3.1x.
In the \netware\v4_xx Directory
-------------------------------
o AIC7870.DSK - AIC-7870 Family of Host Adapters Driver For NetWare 386
v4.xx.
o AIC7870.DDI - Driver definition information file for NetWare v4.xx only.
o ASPITRAN.DSK - ASPI Transport Layer Manager Driver for NetWare v4.xx.
o ASPITRAN.DDI - Driver definition information file for NetWare v4.xx
only.
o ASPICD.DSK - CD-ROM Driver for NetWare v4.xx.
o ASPICD.DDI - Driver definition information file for NetWare v4.xx only.
o NWPALOAD.NLM - File required by the NetWare Bus Interface
o NWPA.NLM - File required by the NetWare Bus Interface
o NBI.NLM - File required by the NetWare Bus Interface
=-=-=-=-=-=-=-=-=-=
Contacting Adaptec
=-=-=-=-=-=-=-=-=-=
Electronic Support
------------------
Technical information, including product literature, answers to commonly asked
questions, information on software upgrades and other topics is available
electronically through the following:
o Adaptec World Wide Web (WWW) site at http://www.adaptec.com.
o File Transfer Protocol (FTP) server at ftp.adaptec.com.
o To submit your electronic mail message to Adaptec Technical Support
use the product support information Webmail form at:
http://www.adaptec.com/support/webmail.html.
o Adaptec USA Bulletin Board Service (BBS) at 408-945-7727; supports up
to 28,800 bps (bits per second), 8 data bits, 1 stop bit, no parity.
No product literature is available on the Adaptec BBS.
o Interactive Fax System at 303-684-3400; available 23 hours a day, 7
days a week. The fax system is out of service 1 hour each day.
Technical and Product Support
-----------------------------
o To speak with a product support representative, call 408-934-SCSI
(7274), M-F, 6:00 a.m. to 5:00 p.m., Pacific Time. After hours, on
weekends, and on holidays, product support is also available for a
fee at 800-416-8066.
o For electronic technical support and information about many of
Adaptec's other electronic support services, or to use the Adaptec
Interactive Support System call 800-959-SCSI (7274) or 408-945-2550,
24 hours a day, 7 days a week. The system prompts you with
questions regarding your problem and then provides step-by-step
troubleshooting instructions.
Sales and Ordering Information
------------------------------
o For sales information, call 800-442-SCSI (7274), M-F, 6:00 a.m. to
5:00 p.m., Pacific Time, or 408-945-8600 and ask for Inside Sales,
M-F, 8:00 a.m. to 5:00 p.m., Pacific Time.
o To order Adaptec software and SCSI cables, call 800-442-SCSI (7274),
M-F, 6:00 a.m. to 5:00 p.m., Pacific Time.
o To request additional documentation for Adaptec products, call
800-934-2766 or 510-732-3829, M-F, 6:00 a.m. to 5:00 p.m., Pacific Time.
