SyntaxVersion: 1.00
Driver ASPICD_DESCR
{
Description: $ASPICD_1
Help: $ASPICD_2
ParameterVersion: 1.01
File: ASPICD.DSK
LIST ParameterStamp
{
Description: $ASPICD_3
Help: $ASPICD_4
ChoiceDescription: $ASPICD_5
Choice: ''
Default: 1
OutputFormat: '%s'
}
}
DLANG: 4
;English
$ASPICD_1 = "Adaptec CD-ROM (ASPI Compatible) Driver"
$ASPICD_2 = "Use this driver with AHA154x, AHA164x,
AHA174X, AIC777x, or AIC787x device driver.
This driver will only register a CD-ROM
device with Netware.\n\n
The default options will correct for the Host
Servers with more than 16 Meg of memory. The
driver has a read ahead buffer that defaults
to 4k, but can be changed to 8K, 16k or 32K.
Use the option listed below to modify the
default read ahead buffer."
$ASPICD_3 = "Read ahead buffer"
$ASPICD_4 = "Use this option to tune the CD-ROM
device to obtain the maximum transfer
rate. The read ahead buffer defaults
to 4K bytes. This default is for
device that have a built in buffer on
the device. The read ahead buffer can
be changed to allow 8K, 16K, or 32K
byte buffer to be used for the transfer
buffer. Any number can be inserted,
but that value will be adjusted to one
of the four values listed above."
$ASPICD_5 = "readbuff=xx"
LANG: 6
;French
$ASPICD_1 = "Adaptec CD-ROM (ASPI Compatible) Driver"
$ASPICD_2 = "Use this driver with AHA154x, AHA164x,
AHA174X, AIC777x, or AIC787x device driver.
This driver will only register a CD-ROM
device with Netware.\n\n
The default options will correct for the Host
Servers with more than 16 Meg of memory. The
driver has a read ahead buffer that defaults
to 4k, but can be changed to 8K, 16k or 32K.
Use the option listed below to modify the
default read ahead buffer."
$ASPICD_3 = "Read ahead buffer"
$ASPICD_4 = "Use this option to tune the CD-ROM
device to obtain the maximum transfer
rate. The read ahead buffer defaults
to 4K bytes. This default is for
device that have a built in buffer on
the device. The read ahead buffer can
be changed to allow 8K, 16K, or 32K
byte buffer to be used for the transfer
buffer. Any number can be inserted,
but that value will be adjusted to one
of the four values listed above."
$ASPICD_5 = "readbuff=xx"
LANG: 7
;German
$ASPICD_1 = "Adaptec CD-ROM (ASPI Compatible) Driver"
$ASPICD_2 = "Use this driver with AHA154x, AHA164x,
AHA174X, AIC777x, or AIC787x device driver.
This driver will only register a CD-ROM
device with Netware.\n\n
The default options will correct for the Host
Servers with more than 16 Meg of memory. The
driver has a read ahead buffer that defaults
to 4k, but can be changed to 8K, 16k or 32K.
Use the option listed below to modify the
default read ahead buffer."
$ASPICD_3 = "Read ahead buffer"
$ASPICD_4 = "Use this option to tune the CD-ROM
device to obtain the maximum transfer
rate. The read ahead buffer defaults
to 4K bytes. This default is for
device that have a built in buffer on
the device. The read ahead buffer can
be changed to allow 8K, 16K, or 32K
byte buffer to be used for the transfer
buffer. Any number can be inserted,
but that value will be adjusted to one
of the four values listed above."
$ASPICD_5 = "readbuff=xx"
LANG: 8
;Italian
$ASPICD_1 = "Adaptec CD-ROM (ASPI Compatible) Driver"
$ASPICD_2 = "Use this driver with AHA154x, AHA164x,
AHA174X, AIC777x, or AIC787x device driver.
This driver will only register a CD-ROM
device with Netware.\n\n
The default options will correct for the Host
Servers with more than 16 Meg of memory. The
driver has a read ahead buffer that defaults
to 4k, but can be changed to 8K, 16k or 32K.
Use the option listed below to modify the
default read ahead buffer."
$ASPICD_3 = "Read ahead buffer"
$ASPICD_4 = "Use this option to tune the CD-ROM
device to obtain the maximum transfer
rate. The read ahead buffer defaults
to 4K bytes. This default is for
device that have a built in buffer on
the device. The read ahead buffer can
be changed to allow 8K, 16K, or 32K
byte buffer to be used for the transfer
buffer. Any number can be inserted,
but that value will be adjusted to one
of the four values listed above."
$ASPICD_5 = "readbuff=xx"
LANG: 14
;Spanish
$ASPICD_1 = "Adaptec CD-ROM (ASPI Compatible) Driver"
$ASPICD_2 = "Use this driver with AHA154x, AHA164x,
AHA174X, AIC777x, or AIC787x device driver.
This driver will only register a CD-ROM
device with Netware.\n\n
The default options will correct for the Host
Servers with more than 16 Meg of memory. The
driver has a read ahead buffer that defaults
to 4k, but can be changed to 8K, 16k or 32K.
Use the option listed below to modify the
default read ahead buffer."
$ASPICD_3 = "Read ahead buffer"
$ASPICD_4 = "Use this option to tune the CD-ROM
device to obtain the maximum transfer
rate. The read ahead buffer defaults
to 4K bytes. This default is for
device that have a built in buffer on
the device. The read ahead buffer can
be changed to allow 8K, 16K, or 32K
byte buffer to be used for the transfer
buffer. Any number can be inserted,
but that value will be adjusted to one
of the four values listed above."
$ASPICD_5 = "readbuff=xx"
