[v7setup]
Rev = 2.1

1   = OK
2   = Cancel
3   = Help
4   = Card: %s
5   = Memory: %d MByte
6   = Resolution
7   = Colors
8   = 16 colors
9   = 256 colors
10  = 64K colors
11  = True color
12  = Fonts
13  = small
14  = large
15  = Refresh rate
16  = Test
17  = Active display driver:
18  = Monitor-Type

23  = Ver. %s

70  = Restart
71  = Exit to DOS
72  = No Restart
73  = Restart Windows to activate the changes
74  = Please insert disk labelled "Drivers for Windows"
75  = %d x %d Pixels
76  = %d Hz Interlaced
77  = %d Hz
78  = ISA
79  = VL
80  = SPEA / V7SETUP Ver.
81  = Restore
82  = Test is running. You can restore the former refresh rate or keep the current one.
83  = Keep
84  = PCI
85  = Please insert disk labelled "Drivers for Windows #2"
88  = ERROR : This program requires Windows 3.1
89  = ERROR : "lzexpand.dll" cannot be loaded
90  = This program can only be started once
91  = SPEA/V7 S3 board not found
92  = Not sufficient memory on the destination drive
93  = File "%s" cannot be created
94  = File "%s" cannot be copied
95  = WARNING: Program group cannot be created
96  = File "%s" not found
97  = ERROR : No driver is available for the chosen resolution
98  = If your screen creates garbage during the test, press ENTER to cancel the test
99  = SPEA BigWin %s
100 = SPEA/V7-Setup does not run in Seamless Windows

130  = V7MERVBE.EXE has to be executed before Windows can be restarted
131  = V7MIRVBE.EXE has to be executed before Windows can be restarted
132  = V7PROVBE.EXE has to be executed before Windows can be restarted
133  = V7TRUVBE.EXE has to be executed before Windows can be restarted
134  = V7LITVBE.EXE has to be executed before Windows can be restarted
135  = V7ME2VBE.EXE has to be executed before Windows can be restarted
136  = V7MIPVBE.EXE has to be executed before Windows can be restarted

140 = Activate secondary card:
141 = Secondary card:
142 = %s
143 = Display memory: %d MByte
144 = Fullscreen
145 = Current monitor
146 = on both
147 = Reports
148 = left
149 = right
150 = Resolution

182 = SPEA DoubleWin %s
185 = %d Hz (user)

190 = DoubleWin can not be used with this board combination.
191 = V7INI.DAT not found. \n Leave Windows and run SPTUNE to install the second V7 card.
192 = Current V7START.DLL not found. Quitting V7SETUP.EXE.

;193 = Press any key ...
;194 = Graphics board