-------------------------- Upgrade History ------------------------------
Ver 7.10
1. Greate changes have been made in this version. It auto detect the
supported refresh rate and mode. Then change the menu to display the supported
one. So from now on what you see is JUST what you CAN get.
2. Merged 24bit and 32bit true color to one program.
3. Added more refresh rate and display mode.
53 132x25-8D Text
54 132x30-8D Text
55 132x43-8D Text
56 132x60-8D Text
5d 640X480x256i 60Hz
7E 320X200-32K 70Hz
70 512X480-32K 60Hz
72 640X400-32K 70Hz
74 640X480-32Ki 60Hz
76 800X600-32K 56Hz
76 800x600-32K 85Hz
78 1024x768-32K 75Hz
7F 320X200-64K 70Hz
71 512X480-64K 60Hz
73 640X400-64K 70Hz
75 640X480-64Ki 60Hz
77 800X600-64K 56Hz
77 800x600-64K 85Hz
79 1024x768-64K 75Hz
6B 320x200-T 70Hz
6C 640x480-Ti 60Hz
3. Delete mode that never supported.
640x350x2
Ver 7.01
========
1. When the refresh rate is not support it report a error message. The
previous version just set the highest refresh rate it can reach.
2. Added more refresh rate and display mode.
800x600-T 85Hz
1024x768-T 75Hz
Ver 7.00
========
1. Split Hicolor into 32K color and 64K color two menu.
2. Added more refresh rate and display mode.
800x600x16 85Hz
1280x1024x16 75Hz
1600x1200x16i 96Hz
640x480x256 72Hz
1280x1024x256 75Hz
1600x1200x256i 96Hz
640x480x32K 60Hz
640x480x32K 72Hz
640x480x32K 75Hz
640x480x32K 85Hz
800x600x32K 60Hz
800x600x32K 75Hz
1024x768x32Ki 87Hz
1024x768x32K 60Hz
1280x1024x32K 87Hz
640x480x64K 60Hz
640x480x64K 72Hz
640x480x64K 75Hz
640x480x64K 85Hz
800x600x64K 60Hz
800x600x64K 75Hz
1024x768x64Ki 87Hz
1024x768x64K 60Hz
1280x1024x64K 87Hz
640x480xTrue 60Hz
640x480xTrue 72Hz
640x480xTrue 75Hz
640x480xTrue 85Hz
800x600xTrue 60Hz
800x600xTrue 75Hz
800x600xTrue 85Hz
1024x768xTruei 87Hz
1024x768xTrue 60Hz
3. Fixed batch file can't set correct refresh rate problem.
4. Cut 5F-HR 85Hz or 1024x768x16-NI (Not supported.)
5. Fixed 5F-I 1024x768-16-I mode batch mode input can't set correct refresh rate
6. Fixed mode 65 1600x1200-16i x-resolution data error.
7. Fixed mode 62 1024x768-256 mode batch mode input can't set correct refresh rate
Ver 6.10
========
1. The new version is LCD chip capatable. When test LCD board,
SVM will reset Main menu frame and automaticly adjust message
display frame and message position. Old the version will lost
all display detail messages and guid message.
2. Increase 5F-I and 62-I mode. (Compare with SVM 6.0)
3. Add following mode & refresh rate:
mode 5D-NI 75Hz
mode 5D-HR 85Hz
4. Cut 64-NI 60Hz or 1280x1024x256-NI. (Not supported.)
5. Fixed following bug:
The display and real mode dose not match when using
mode 5F-I (1024x768x16c interlaced ) or
mode 62-I (1024x768x256c interlaced )
Ver 6.0
=======
The display and real mode dose not match when using
mode 5F-I (1024x768x16c interlaced ) or
mode 62-I (1024x768x256c interlaced )
