/* |---------------------------------------------------------------------|
| Copyright (c) Western Digital Corporation 1992, All Rights Reserved |
| |
| VGA drivers Install Program |
| Version 4.0 |
| Author Lenny Law |
| |
| This file must be named 'Install.Dat' and reside on the |
| main distribution diskette. Another file which must be on |
| every distribution diskette is 'DISK.ID'. |
| |
| Revision History |
| 07/13/90 rev 1.0 LL initial code |
| 01/10/91 rev 2.0 LL release 2.0 |
| 05/01/91 rev 3.0 LL release 3.0 |
| 07/01/91 rev 3.1 LL release 3.1 |
| 02/28/92 rev 4.0 Henry Cheng release 4.0 |
|---------------------------------------------------------------------|
*/
@DefineProject
@Name = ""
@Version = "4.0"
@SubDir = "\\"
@OutDrive = Z
@EndProject
@DefineVars
@QString @Chipid = "WD90C31"
@QString @BiosVer = "003234-516"
@QString @Memory = " 1MB"
@QString @Ramdac = " 32K"
@QString @Company = ""
@QString @WordKbd = "ibmcvt.kbd"
@Qstring @Program = "VGAMODE.EXE"
@Qstring @Copyright ="Copyright(c) WDC 1992, All Rights Reserved"
@Qstring @License = "Licensed by Western Digital for use by its customers only"
@EndVars
@Welcome
@CLS
Paradise Accelerator Card for Windows Installation Program @Version
@Copyright
-----------------------------------------------------------------
The installation program used to install Paradise drivers
is licensed software provided by Knowledge Dynamics Corp,
P.O. Box 1558, Canyon Lake, Texas 78130-1558 (USA). INSTALL
is Copyright (c) 1987-1992 by Knowledge Dynamics Corp which
reserves all copyright protection worldwide. INSTALL is
provided to you for the exclusive purpose of installing Paradise
drivers. Western Digital is exclusively responsible for the
support of Paradise drivers, including support during the
installation phase. In no event will Knowledge Dynamics Corp
be able to provide any technical support for Paradise drivers.
-----------------------------------------------------------------
@Pause
@EndWelcome
@GetGroups
DRIVERS / UTILITIES INSTALLATION
Use the ARROW, PG-UP or PG-DOWN keys to highlight
your choice and press <Enter> to make your selection
@Set A = " AutoCAD/AutoShade"
@Set C = " Cadvance 1.2"
@Set F = " Generic CADD Level 3"
@Set I = " PCad Level 2"
@Set M = " VersaCAD"
@Set P = " MicroSoft Word 5.0/5.5"
@Set G = " Lotus - 1-2-3"
@Set J = " Lotus - Symphony"
@Set K = " Utilities"
@Set O = " WordPerfect 5.0/5.1"
@EndGroups
@If ('A' [= @Group)
@GetOption
@Cls
Select the AutoCad or AutoShade version that you have
Use the ARROW, PG-UP or PG-DOWN keys to highlight
your choice and press <Enter> to make your selection
@Option 102 = "AutoCad Release 9/10"
@Option 104 = "AutoShade Version 1.x"
@Option 100 = "AutoCad Rel 10 Display-List"
@Option 101 = "AutoCad 386 R11/AutoShade 386 v.2"
@Option 103 = "AutoCad 386 Display-List"
@EndOption
@If (102 [= @Option)
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use for AutoCad Release 9/10
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 20 = " 800 by 600 16 color"
@Option 63 = " 800 by 600 256 color"
@Option 22 = "1024 by 768 16 color"
@Option 96 = "1024 by 768 256 color"
@Option 99 = "Set Color utility"
@EndOption
@ElseIf (100 [= @Option)
@If (@EMMTotal == 0)
@Display
@Cls
ERROR: The VGA DisplayList AutoCAD ADI drivers
require expanded memory to run. No expanded
memory was detected. Please install your
EMM driver in your CONFIG.SYS file, reboot
your computer, and re-run INSTALL.
@Pause
@Abort
@EndDisplay
@ElseIf (@EMMTotal != 0)
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use for Display List
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 13 = " 800 by 600"
@Option 14 = "1024 by 768"
@EndOption
@EndIf
@ElseIf (103 [= @Option)
@If (@CPU < 386)
@Display
@Cls
AutoCad Release 11 requires an 80386 or above.
You are running on an 80@CPU CPU.
Program will be aborted.
@Abort
@EndDisplay
@EndIf
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use for AutoCad 386 Display-List
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 97 = " 800 by 600 16 color"
@Option 106 = " 800 by 600 256 color"
@Option 98 = "1024 by 768 16 color"
@Option 107 = "1024 by 768 256 color"
@EndOption
@ElseIf (101 [= @Option)
@If (@CPU < 386)
@Display
@Cls
AutoCad Release 10/11 386 requires an 80386 or above.
You are running on an 80@CPU CPU.
Program will be aborted.
@Abort
@EndDisplay
@EndIf
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use for AutoCad 386/AutoShade 386
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 18 = "AutoShade 640 by 480 256 color"
@Option 19 = "AutoShade 800 by 600 256 color"
@Option 62 = "AutoShade 1024 by 768 256 color"
@If ("@Ramdac" == " 32K")
@Option 16 = "AutoCad 640x480x256 or AutoShade 640x480x32K"
@Option 17 = "AutoCad 800x600x256 or AutoShade 800x600x32K"
@EndIf
@EndOption
@ElseIf (104 [= @Option)
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use for Autoshade ver 1.x
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 55 = " 640 by 400 256 color"
@Option 56 = " 640 by 480 256 color"
@Option 66 = " 800 by 600 256 color"
@Option 69 = "1024 by 768 256 color"
@EndOption
@EndIf
@If (18 [= @Option || 19 [= @Option || 62 [= @Option || 16 [= @Option ||
20 [= @Option || 22 [= @Option || 63 [= @Option || 17 [= @Option ||
96 [= @Option || 99 [= @Option || 13 [= @Option || 14 [= @Option ||
97 [= @Option || 98 [= @Option || 106 [= @Option || 107 [= @Option ||
55 [= @Option || 56 [= @Option || 66 [= @Option || 69 [= @Option)
@GetOutDrive
@Cls
Select the Drive on which to install AutoCad/AutoShade drivers
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is AutoCad/AutoShade installed?"
@EndSubDir
@EndIf
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib acad.lif
@File ds800x16.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 20
@File ds102416.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 22
@File ds800ff.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 63
@File ds1k256.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 96
@File 11pdlv84.exp @Out "@OutDrive:\\@SubDir\\":*.* @Option 97
@File 11pdlv14.exp @Out "@OutDrive:\\@SubDir\\":*.* @Option 98
@File 11pdlv88.exp @Out "@OutDrive:\\@SubDir\\":*.* @Option 106
@File 11pdlv18.exp @Out "@OutDrive:\\@SubDir\\":*.* @Option 107
@File 11p6168.exp @Out "@OutDrive:\\@SubDir\\":*.* @Option 16
@File 11p8188.exp @Out "@OutDrive:\\@SubDir\\":*.* @Option 17
@File 11pshv68.exp @Out "@OutDrive:\\@SubDir\\":*.* @Option 18
@File 11pshv88.exp @Out "@OutDrive:\\@SubDir\\":*.* @Option 19
@File 11pshv18.exp @Out "@OutDrive:\\@SubDir\\":*.* @Option 62
@If (13 [= @Option || 14 [= @Option)
@File wdvgadl8.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 13
@File wdvgadl1.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 14
@File wdvgadl.doc @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File conf.doc @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@If (20 [= @Option || 22 [= @Option || 63 [= @Option || 96 [= @Option)
@File acad.txt @Out "@OutDrive:\\@SubDir\\":*.* @Option 102 @EndIf
@If (101 [= @Option || 103 [= @Option)
@File acad386.txt @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@File setc.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 99
@File setc.doc @Out "@OutDrive:\\@SubDir\\":*.* @Option 99
@File rd400.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 55
@File rd480.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 56
@File rd800.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 66
@File rd1024.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 69
@If (55 [= @Option || 56 [= @Option || 66 [= @Option ||
69 [= @Option)
@File shade.doc @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@EndLib
@EndDisk
@If (18 [= @Option || 19 [= @Option || 62 [= @Option || 16 [= @Option ||
20 [= @Option || 22 [= @Option || 63 [= @Option || 17 [= @Option ||
96 [= @Option || 99 [= @Option || 13 [= @Option || 14 [= @Option ||
97 [= @Option || 98 [= @Option || 106 [= @Option || 107 [= @Option ||
55 [= @Option || 56 [= @Option || 66 [= @Option || 69 [= @Option)
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@Cls
The ADI driver(s) have been installed.
Please see the user manual for complete
details on running AutoCad.
@If (103 [= @Option)
Please remember to place the name of the driver in
the environment with SET command.
┌─────────────────────────────────────────┐
│ set DSPADI=[Drive]:[\path]\11p?????.exp │
└─────────────────────────────────────────┘
@EndIf
@Pause
@If (104 [= @Option)
@If (@Exists "shade.cfg")
@System "del shade.cfg"
@Else
@Cls
╔═════════════════════════════════════════════════╗
║ PLEASE ANSWER THE FOLLOWING QUESTIONS ║
║ FROM AUTOSHADE AS INSTRUCTED BELOW ║
╓───────────╫═════════════════════════════════════════════════╣
║ When asked║ "Select display device" ║
║ choose: ║ IBM Video Graphics Array ║
╟───────────╢═════════════════════════════════════════════════╣
║ When asked║ "Select rendering display device" ║
║ choose: ║ Autodesk Device Interface rendering driver ║
╟───────────╢═════════════════════════════════════════════════╣
║ When asked║ "Share a single screen (DEFAULT No)" ║
║ choose: ║ Yes ║
╟───────────╢═════════════════════════════════════════════════╣
║ When asked║ "Does FLIPSCREEN require a redraw (DEFAULT No)" ║
║ choose: ║ Yes ║
╙───────────╜═════════════════════════════════════════════════╝
You MUST enter 'SHADE' at the DOS prompt to start
reconfiguration in order for AutoShade to make use
of the newly installed driver. You must execute the
driver first before typing 'SHADE' to configure.
@Pause
@EndIf
@ElseIf (101 [= @Option || 104 [= @Option)
@Cls
╔═════════════════════════════════════════════════╗
║ PLEASE ANSWER THE FOLLOWING QUESTIONS ║
║ FROM AUTOSHADE AS INSTRUCTED BELOW ║
╓───────────╫═════════════════════════════════════════════════╣
║ When asked║ "Select display device" ║
║ choose: ║ P386 Autodesk Device Interface ║
╟───────────╢═════════════════════════════════════════════════╣
║ When asked║ "Select rendering display device" ║
║ choose: ║ P386 Autodesk Device Interface ║
╟───────────╢═════════════════════════════════════════════════╣
║ When asked║ "Do the display and AutoShade rendering devices ║
║ ║ share a single screen?" ║
║ choose: ║ Yes ║
╟───────────╢═════════════════════════════════════════════════╣
║ When asked║ "Do the display and Autodesk RenderMan ║
║ ║ rendering devices share a single screen?" ║
║ choose: ║ Yes ║
╟───────────╢═════════════════════════════════════════════════╣
║ When asked║ "Does FLIPSCREEN require a redraw (DEFAULT No)" ║
║ choose: ║ No ║
╙───────────╜═════════════════════════════════════════════════╝
You MUST enter 'SHADE' at the DOS prompt to start reconfiguration in order
for AutoShade to make use of the newly installed driver. You must execute
the driver first before typing 'SHADE' to configure.
@Pause
@ElseIf (100 [= @Option)
@Cls
To install Release 10 Display List drivers, enter the command
wdvgadlx f<n>
where x=1 for 1024x768 or x=8 for 800x600, and
where <n> is the number of kilobytes of expanded memory
that the driver should leave free for the use of AutoCAD.
E.g., to leave 512 kilobytes free, enter
wdvgadlx f512
To configure an AutoCAD Release 10 Display List driver,
please refer to the file CONF.DOC.
@Pause
@EndIf
To install another driver or utility, run install again.
@Pause
@EndFinish
@EndIf
@ElseIf ('C' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
Use the ARROW, PG-UP or PG-DOWN keys to highlight
your choice and press <Enter> to make your selection
@Option 35 = " 640 by 480 16 color"
@Option 36 = " 800 by 600 16 color"
@Option 37 = "1024 by 768 16 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install Cadvance driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is Cadvance installed ? "
@EndSubDir
@If (@Exists "@OutDrive:\\@SubDir\\gs.drv")
@Display
If you would like to save GS.DRV
press <Esc> to exit the program.
Copy the drivers to a safe place
and start again.
@Pause
@EndDisplay
@EndIf
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib cadvance.lif
@File gsvga.drv @Out "@OutDrive:\\@SubDir\\":gs.drv @Option 35
@File gs800.drv @Out "@OutDrive:\\@SubDir\\":gs.drv @Option 36
@File gs102416.drv @Out "@OutDrive:\\@SubDir\\":gs.drv @Option 37
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@Cls
The Cadvance driver has been installed.
@If (@Exists "gs.drv")
You may start Cadvance in the new resolution.
@EndIf
@Pause
To install another driver or utility, run install again.
@Pause
@EndFinish
@ElseIf ('F' [= @Group)
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 51 = " 640 by 400 256 color"
@Option 52 = " 640 by 480 256 color"
@Option 43 = " 800 by 600 16 color"
@Option 65 = " 800 by 600 256 color"
@Option 46 = "1024 by 768 16 color"
@Option 95 = "1024 by 768 256 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install Generic Cadd driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is Generic Cadd Level 3 installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib generic.lif
@File para800.vgd @Out "@OutDrive:\\@SubDir\\":*.* @Option 43
@File p1024x16.vgd @Out "@OutDrive:\\@SubDir\\":*.* @Option 46
@File p640x400.vgd @Out "@OutDrive:\\@SubDir\\":*.* @Option 51
@File p640x480.vgd @Out "@OutDrive:\\@SubDir\\":*.* @Option 52
@File p800x600.vgd @Out "@OutDrive:\\@SubDir\\":*.* @Option 65
@File p1024xff.vgd @Out "@OutDrive:\\@SubDir\\":*.* @Option 95
@EndLib
@EndDisk
@If (43 [= @Option || 46 [= @Option || 51 [= @Option || 52 [= @Option || 65 [= @Option || 95 [= @Option)
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@If (@Exists "config.exe")
@Execute "config.exe",""
@Abort
@Else
Unable to locate CONFIG.EXE from Generic CADD.
You must run CONFIG to complete installation !
@Pause
@Abort
@EndIf
@EndFinsh
@Else @EndIf
@ElseIf ('I' [= @Group)
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 5 = " 800 by 600 16 color"
@Option 6 = "1024 by 768 16 color"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install PCad driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is PCad Level 2 installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib pcad.lif
@File dwdpvga.drv @Out "@OutDrive:\\@SubDir\\":*.* @Option 5
@File dpvga1k.drv @Out "@OutDrive:\\@SubDir\\":*.* @Option 6
@EndLib
@EndDisk
@If (5 [= @Option || 6 [= @Option)
@Finish
@ChDrive @OutDrive
@ChDir "\\"
@Cls
Please edit the DISPLAY line in 'PCADDRV.SYS' (in
root dir) to reflect the change in the driver.
┌────────────────────────────────────────────┐
│ EX: system \pcad\tkcards\sibmpc.drv │
│ input \pcad\tkcards\imsser.drv │
│ display \pcad\tkcards\dwdpvga.drv │
└────────────────────────────────────────────┘
@Pause
To install another driver or utility, run install again.
@Pause
@EndFinish
@Else @EndIf
@ElseIf ('M' [= @Group)
@GetOption
@Cls
Select the VersaCad version that you have
Use the ARROW, PG-UP or PG-DOWN keys to highlight
your choice and press <Enter> to make your selection
@Option 82 = "Version 5.3"
@Option 83 = "Version 5.4"
@Option 84 = "386 / Version 5.4"
@EndOption
@If (82 [= @Option)
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use for Version 5.3
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 7 = "800 by 600 16 color"
@Option 9 = "1024 by 768 16 color"
@EndOption
@ElseIf (84 [= @Option)
@If (@CPU < 386)
@Display
@Cls
Versacad Version 5.4 / 386 requires an 80386 or above.
Your are running on an 80@CPU CPU.
Program will be aborted.
@Abort
@EndDisplay
@EndIf
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use for 386 / Version 5.4
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 85 ="640 by 400 256 color"
@Option 86 ="640 by 480 256 color"
@Option 87 ="800 by 600 256 color"
@Option 88 ="1024 by 768 16 color"
@EndOption
@ElseIf (83 [= @Option)
@GetOption
@CheckBox
@Cls
Select the resolution you would like to use for Version 5.4
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 72 ="640 by 400 256 color"
@Option 73 ="640 by 480 256 color"
@Option 8 = "800 by 600 16 color"
@Option 74 ="800 by 600 256 color"
@Option 10 ="1024 by 768 16 color"
@EndOption
@EndIf
@GetOutDrive
@Cls
Select the Drive on which Versacad is installed
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Prompt = " Which subdirectory is Versacad installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib vcad.lif
@File fixpvcad.exe @Out "@OutDrive:\\@SubDir\\":*.*
@File unlock.com @Out "@OutDrive:\\@SubDir\\":*.*
@If (7 [= @Option || 9 [= @Option)
@File vcad53.bat @Out "@OutDrive":\*.* @EndIf
@If (7 [= @Option || 9 [= @Option)
@File enviro53.cfg @Out "@OutDrive:\\@SubDir\\":*.*
@File 53e.cfg @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@If (9 [= @Option) @File para3.53 @Out "@OutDrive:\\@SubDir\\":*.*
@File para2.53 @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (7 [= @Option)
@File para2.53 @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@If (9 [= @Option || 10 [= @Option)
@File pvga1024.exe @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@If (8 [= @Option || 10 [= @Option || 72 [= @Option || 73 [= @Option || 74 [= @Option)
@File vcad54.bat @Out "@OutDrive":\*.* @EndIf
@If (8 [= @Option || 10 [= @Option || 72 [= @Option || 73 [= @Option || 74 [= @Option)
@File enviro54.cfg @Out "@OutDrive:\\@SubDir\\":*.*
@File 54e.cfg @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@If (74 [= @Option)
@File para6.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para5.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para4.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para3.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para2.54 @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (10 [= @Option)
@File para5.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para4.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para3.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para2.54 @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (73 [= @Option)
@File para4.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para5.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para2.54 @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (72 [= @Option)
@File para4.54 @Out "@OutDrive:\\@SubDir\\":*.*
@File para2.54 @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (8 [= @Option)
@File para2.54 @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@If (72 [= @Option || 73 [= @Option || 74 [= @Option)
@File pvgaff.exe @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@If (85 [= @Option || 86 [= @Option || 87 [= @Option)
@File pvga256p.exe @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@If (85 [= @Option || 86 [= @Option || 87 [= @Option || 88 [= @Option)
@File enviro5p.cfg @Out "@OutDrive:\\@SubDir\\":*.*
@File 5pe.cfg @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@File pvgap.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 88
@If (87 [= @Option)
@File para6.5p @Out "@OutDrive:\\@SubDir\\":*.*
@File para5.5p @Out "@OutDrive:\\@SubDir\\":*.*
@File para4.5p @Out "@OutDrive:\\@SubDir\\":*.*
@File para3.5p @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (88 [= @Option)
@File para5.5p @Out "@OutDrive:\\@SubDir\\":*.*
@File para4.5p @Out "@OutDrive:\\@SubDir\\":*.*
@File para3.5p @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (86 [= @Option)
@File para4.5p @Out "@OutDrive:\\@SubDir\\":*.*
@File para5.5p @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (85 [= @Option)
@File para4.5p @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@EndLib
@EndDisk
@If (7 [= @Option || 8 [= @Option || 9 [= @Option || 10 [= @Option || 72 [= @Option || 73 [= @Option || 74 [= @Option || 85 [= @Option || 86 [= @Option || 87 [= @Option || 88 [= @Option)
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@Cls
The Versacad driver has been extracted.
Next, you need to run ENVIRO.EXE from Versacad
to configure the driver.
@Pause
@If (9 [= @Option)
@System "copy enviro53.cfg+para2.53+para3.53+53e.cfg enviro.cfg >NUL"
@ElseIf (7 [= @Option)
@System "copy enviro53.cfg+para2.53+53e.cfg enviro.cfg >NUL"
@EndIf
@If (74 [= @Option)
@System "copy enviro54.cfg+para2.54+para3.54+para4.54+para5.54+para6.54+54e.cfg enviro.cfg >NUL"
@ElseIf (10 [= @Option)
@System "copy enviro54.cfg+para2.54+para3.54+para4.54+para5.54+54e.cfg enviro.cfg >NUL"
@ElseIf (73 [= @Option)
@System "copy enviro54.cfg+para2.54+para5.54+para4.54+54e.cfg enviro.cfg >NUL"
@ElseIf (72 [= @Option)
@System "copy enviro54.cfg+para2.54+para4.54+54e.cfg enviro.cfg >NUL"
@ElseIf (8 [= @Option)
@System "copy enviro54.cfg+para2.54+54e.cfg enviro.cfg >NUL"
@EndIf
@If (87 [= @Option)
@System "copy enviro5p.cfg+para3.5p+para4.5p+para5.5p+para6.5p+5pe.cfg enviro.cfg >NUL"
@ElseIf (88 [= @Option)
@System "copy enviro5p.cfg+para3.5p+para4.5p+para5.5p+5pe.cfg enviro.cfg >NUL"
@ElseIf (86 [= @Option)
@System "copy enviro5p.cfg+para5.5p+para4.5p+5pe.cfg enviro.cfg >NUL"
@ElseIf (85 [= @Option)
@System "copy enviro5p.cfg+para4.5p+5pe.cfg enviro.cfg >NUL"
@EndIf
@System "del enviro5?.cfg >NUL"
@System "del para?.5? >NUL"
@System "del 5?e.cfg >NUL"
@If (84 [= @Option)
Please remember to edit the video option in the
'vcad386.bat' on the root directory. Look for the
line immediately above 'vrun \vcad386'.
Replace it with the new driver:
┌─────────────────────────────────────┐
│ Resolution Drivers │
├─────────────────────────────────────┤
│ 640 x 400 x 256 ───> PVGA256P.EXE │
│ 640 x 480 x 256 ───> PVGA256P.EXE │
│ 800 x 600 x 256 ───> PVGA256P.EXE │
│ 1024 x 768 x 16 ───> PVGAP.EXE │
└─────────────────────────────────────┘
@EndIf
You must first load the driver (by entering the
name of the driver at the DOS prompt) and an
input device (if any) before starting Versacad.
Please read the Versacad manual for
complete details on running Versacad.
@Pause
@If (@Exists "enviro.exe")
@System "fixpvcad.exe"
@System "unlock.com"
If there are no error message you
should run ENVIRO now, otherwise
press <Esc> to abort.
@Pause
@Execute "enviro",""
@Else
Unable to locate ENVIRO.EXE program.
You MUST run 'fixpvcad.exe' and 'unlock.com'
first before running 'enviro.exe'.
ENVIRO must be run to complete installation !
@Pause
@Abort
@EndIf
To install another driver or utility, run install again.
@Pause
@EndFinish
@Else @EndIf
@ElseIf ('P' [= @Group)
@GetOutDrive
@Cls
Select the Drive on which to install Word driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is MicroSoft Word installed ? "
@EndSubDir
@If (@Exists "@OutDrive:\\@SubDir\\makevid.exe")
@GetOption
@Cls
Are you using a standard keyboard driver ?
@Option 105 = " Yes, using default keyboard driver"
@Option 106 = " No, using special keyboard driver"
@EndOption @EndIf
@If (106 [= @Option)
@GetString @WordKbd
@Prompt = "What is the name of your keyboard driver ?"
@EndString @EndIf
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib word.lif
@If (@Exists "@OutDrive:\\@SubDir\\makevid.exe")
@File mk-wdvid.bat @Out "@OutDrive:\\@SubDir\\":*.* @Option 105
@File vga.csd @Out "@OutDrive:\\@SubDir\\":*.*
@File vga.gsd @Out "@OutDrive:\\@SubDir\\":*.*
@Else @File wdscreen.vid @Out "@OutDrive:\\@SubDir\\":*.* @EndIf
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@If (@Exists "makevid.exe")
@If (106 [= @Option)
@Cls
Use the following command to make the driver
════════════════════════════════════════════════════════════════
MAKEVID wdscreen.vid -Lfr vga.csd -Lfr vga.gsd -Lfr @WordKbd
════════════════════════════════════════════════════════════════
Please read the Word user guide for complete
instruction on using MAKEVID.EXE
@Else
╒═══════════════════════════════════════════╕
│ Making screen driver with defult keyboard │
╘═══════════════════════════════════════════╛
@System "mk-wdvid.bat"
@EndIf
@EndIf
To use this 800x600x16 driver with Word, rename
the original SCREEN.VID file. Rename the driver
WDSCREEN.VID to SCREEN.VID, and then start Word.
@Pause
To install another driver or utility, run install again.
@Pause
@EndFinish
@ElseIf ('G' [= @Group || 'J' [= @Group)
@GetOutDrive
@Cls
Select the Drive on which to install Lotus driver
@EndOutDrive
@If (@Removable == 0)
@GetSubDir
@Cls
@Prompt = "Which subdirectory is Lotus installed ? "
@EndSubDir
@GetOption
@CheckBox
@Cls
You may now select the driver(s) to install
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 89 = "132 by 25 Text"
@Option 90 = "132 by 43 Text"
@Option 91 = "640 by 480 Graphic"
@Option 92 = "800 by 600 Graphic"
@Option 93 = "1024 by 768 Graphic - 8x9 Font"
@Option 94 = "1024 by 768 Graphic - 9x13 Font"
@EndOption
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib lotus.lif
@File sp0_25s.drv @Out "@OutDrive:\\@SubDir\\":*.* @Option 89
@File sp0_43s.drv @Out "@OutDrive:\\@SubDir\\":*.* @Option 90
@File sp1_480s.drv @Out "@OutDrive:\\@SubDir\\":*.* @Option 91
@File sp1_600s.drv @Out "@OutDrive:\\@SubDir\\":*.* @Option 92
@File sib2vga.drv @Out "@OutDrive:\\@SubDir\\":*.* @Option 93
@File sib3vga.drv @Out "@OutDrive:\\@SubDir\\":*.* @Option 94
@EndLib
@EndDisk
@Else
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib lotus.lif
@File sp0_25s.drv @Out "@OutDrive":\*.*
@File sp0_43s.drv @Out "@OutDrive":\*.*
@File sp1_480s.drv @Out "@OutDrive":\*.*
@File sp1_600s.drv @Out "@OutDrive":\*.*
@File sib2vga.drv @Out "@OutDrive":\*.*
@File sib3vga.drv @Out "@OutDrive":\*.*
@EndLib
@EndDisk
@EndIf
@Display
NOTE:
If you are installing Lotus for the first time, the Lotus
INSTALL program must be in Drive A. Also, the new drivers
must be copied to a floppy disk so that they may be modified
after decompression.
@Pause
@EndDisplay
@Finish
@If (@Removable == 0)
@If (89 [= @Option || 90 [= @Option || 91 [= @Option || 92 [= @Option || 93 [= @Option || 94 [= @Option)
@ChDrive @OutDrive
@ChDir "@SubDir"
@If (@Exists "@OutDrive:\\@SubDir\\install.exe")
@If (@Exists "single.lbr")
@System "del single.lbr"
@EndIf
@System "Install"
@Else
Unable to find Lotus INSTALL.
Installation failed. You must run INSTALL
from Lotus to use the new driver.
@EndIf
@Else @EndIf
@Else
You must now run the Lotus INSTALL program
to modify your driver to support the new @Name
extended capabilities.
@EndIf
Please see the user manual for complete
details on installing and running Lotus.
@Pause
To install another driver or utility, run install again.
@Pause
@EndFinish
@ElseIf ('K' [= @Group)
@GetOption
@CheckBox
@Cls
Select the utilities you would like to install
Use "Y"es or "N"o to Tag all options at once
'SpaceBar' to toggle individual 'Yes/No' selection
and 'Enter' to accept the selections
@Option 67 = "PROGRAM.TXT"
@Option 30 = "RWS.EXE"
@Option 32 = "VGAMODE.EXE"
@Option 33 = "VESA.EXE"
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to copy the utilities
@EndOutDrive
@If (@Removable == 0)
@GetSubDir
@Cls
@Prompt = " Install to which subdirectory ? "
@EndSubDir
@EndIf
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib utility.lif
@File rws.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 30
@File vgamode.exe @Out "@OutDrive:\\@SubDir\\":*.* @Option 32
@File program.txt @Out "@OutDrive:\\@SubDir\\":*.* @Option 67
@File vesa.exe @Out "@OutDrive:\\@Subdir\\":*.* @Option 33
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
To install another driver or utility, run install again.
@Pause
@EndFinish
@ElseIf ('O' [= @Group)
@GetOption
@Cls
Select the resolution you would like to use
@Option 47 = " 800 by 600 Graphics mode for v5.0"
@Option 11 = "1024 by 768 Graphics mode for v5.0"
@Option 81 = "1024 by 768 Graphics mode for v5.1"
Use the ARROW, PG-UP or PG-DOWN keys to highlight
your choice and press <Enter> to make your selection
@EndOption
@GetOutDrive
@Cls
Select the Drive on which to install WordPerfect driver
@Suppress A
@Suppress B
@EndOutDrive
@GetSubDir
@Cls
@Prompt = " Which subdirectory is WordPerfect installed ? "
@EndSubDir
@DefineDisk
@Label = "Disk 1 of 1"
@BeginLib wp.lif
@File wdpvga1.wpd @Out "@OutDrive:\\@SubDir\\":*.* @Option 47
@If (11 [= @Option)
@File wdpvga2.wpd @Out "@OutDrive:\\@SubDir\\":*.*
@ElseIf (81 [= @Option)
@File wdpvga3.vrs @Out "@OutDrive:\\@SubDir\\":*.*
@File testwpd.doc @Out "@OutDrive:\\@SubDir\\":*.*
@EndIf
@EndLib
@EndDisk
@Display
NOTE:
In order to use the new driver, you need to start WordPerfect
and enter 'Shift + F1' to choose the display driver.
@Pause
@EndDisplay
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
@If (81 [= @Option)
┌──────┐
│ NOTE │
└──────┘
This current release of WordPerfect 5.1 drivers
may not support the mouse driver that you are using.
┌─────────╖
│ WARNING ║
╘═════════╝
If you plan to use a mouse, save your file before you
retrieve a document and view it in graphics mode.
@Pause
@EndIf
To install another driver or utility, run install again.
@Pause
@EndFinish
@EndIf
