WINDOWS 3.0 DRIVER FOR NEC MONOGRAPH
Version V3.00.20
06 June 1991

INSTALLATION
============

This diskette contains the Windows 3.0 driver for the NEC MonoGraph high
resolution monochrome display subsystem.

IF YOU ARE USING THE MONOGRAPH AS THE PRIMARY MONITOR IN YOUR SYSTEM, install
(or reinstall) Windows 3.0 using the directions in the Microsoft Windows User
Guide.  When the SETUP program lists the configuration of the machine, modify
the display adapter to use the device marked

        CGA (Color/Graphics Adapter)

IF YOU ARE USING ANOTHER MONITOR AS THE PRIMARY MONITOR IN YOUR SYSTEM, install
(or reinstall) Windows 3.0 using the directions in the Microsoft Windows User
Guide.  When the SETUP program lists the configuration of the machine, modify
the display adapter to use the device corresponding to your primary adapter.

Next, insert the NEC MonoGraph Windows Driver Disk into drive A and run the
Windows setup from DOS. When prompted for display type, select 'other'
and select the Monograph driver.

TO RUN WINDOWS 3.0 IN 386 ENHANCED MODE

You have to copy "a:\command.pif" to your "\windows" directory in order to use
the DOS prompt as an exclusive process in the 386 Enhanced Mode.



-> RELEASE NOTES

This driver supports the native resolution of 1024 pixels by 1024 pixels.  In
addition, this version of the driver should function in any of the Windows 3.0
modes, including 386 Enhanced mode.  Also, the driver should operate properly
with the NEC MonoGraph as either a primary or secondary adapter.