File Name: README.VP
=================================================================

        Before installing the VP driver, you should have following disks:

            o  VP program disks
            o  ICL HRA Utilities and Drivers Disk

        This directory tree contains all the files required for setting
        up Xerox Ventura Publisher in the 800x600 or the 1024x768 mode.
        The files are:

            o  VP1-54B.DRV  - 800 x 600 / 2 colors - Ventura 1.0/ 1.1
                              Device Driver.
            o  VP2-67B.DRV  - 1024 x 768 / 2 colors - Ventura 2.0 Device
                              Driver.   This driver is also used for  GEM
                              3.0, 3.1 & 3.13.
            o  VPDRV.EXE    - Drivers installation program.
            o  README.VP    - This file.

        Note:

             The GEM drivers, GEM3-54B.DRV and GEM3-65B.DRV, are used  as
        the  800x600 16-color and 1024x768 16-color drivers  respectively
        for Ventura 2.0.

        The setup procedure is as follows:

             1/ Switch to the GEM-VP directory, run VPDRV.EXE and
                follow the instructions given by the program.

             Special Notes:

                The batch file to start Ventura (VP.BAT) will
                be created in the root directory of the hard disk drive.
                
                When done with the installation, the program will
                give a message that it returns to the main
                menu. This message can be ignored when installing
                drivers for Ventura Publisher. The program exits
                to DOS.