====
OS/2
====
These drivers are designed to function with the OS/2 2.1 operating system.  


DRIVER INSTALLATION
****************************************************************************
NOTE:   ALWAYS USE THE "INSTALL.CMD" FOR THE FIRST INSTALLATION OF THE VIDEO
        DEVICE DRIVERS.  TO CHANGE VIDEO RESOLUTIONS, USE THE "DSPINSTL"
        PROGRAM.
****************************************************************************

To install the drivers, follow these instructions:

Step 1: Install OS/2 as you normally would for a VGA display.  Open an OS/2
        full-screen or window session.

Step 2: Place the Display Driver Diskette #3 in drive A.  Type A:<ENTER> to 
        make this the default drive.  Then type INSTALL  A:  C:  <ENTER>.
        Once the drivers are installed, the "DSPINSTL" program is auto-
        matically invoked.  Follow the instructions of the program to set up 
        the OS/2 drivers in your system.  Once the installation is complete, 
        the system must be shut down and restarted for changes to take effect.


DRIVER DISKETTE COPY
***************************************************************************
NOTE:   DISKETTE COPIES OF THE OS/2 DRIVERS MUST HAVE A "VOLUME LABEL" THAT 
        READS "DISP 1" IN ORDER TO BE AN INSTALLABLE DISKETTE.
***************************************************************************

To copy the OS/2 Display Driver Diskette #3, follow these instructions.

Step1:  Copy all files on the Display Driver Diskette #3 as you normally 
        would onto another diskette.

Step 2: Place the diskette copy in drive A.  At the C:\ prompt, type
        LABEL A: DISP 1 to properly label your diskette.  Then store your
        diskette copy in a safe place.

        ==================================================================== 
        For proper installation of OS/2 drivers, all diskette copies must be
        properly labeled "DISP 1".
        ====================================================================