Author:  Stephen Huang and Senjin Chen at ALI OS2 & Windows drivers
Date:    05/29/95  14:27 PM
Priority: Normal
Receipt Requested
TO: Tommy
CC: Jack
CC: Senjin
Subject: OS/2 Warp Install Instructions
------------------------------- Message Contents -------------------------------
     Installation Instructions
     ALI OS/2 Driver Warp drivers (also for Windows)
                                                          
     Date:      05/29/95
     
     Installation Considerations
     
     1.  The installation process assumes that the user knows the  
         maximum vertical refresh rate as well as the maximum   
         resolution of the monitor.
     
     2.  When installing the ALI driver over a non-ALI driver
         (e.g., SVGA), the standard IBM VGA driver must be      
         installed first.
     
     3.  The driver diskettes must be labeled "AVANCE",
         If it is not labeled installation will fail.
     
     4.  The ALI driver will not install unless an ALI chip-based
         card is installed in the machine at the time of driver      
         installation. 
     
     
     Installation Instructions
     
     
     1.  Make sure you have all open data files saved before 
         continuing the ALI driver installation.
     
     2.  Make sure Win-OS/2 session and all Seamless Windows 
         applications are closed. (Seamless applications are 
         windows applications that run on top of the PM Desktop.)
     
     3.  Open an OS/2 command prompt (windowed or full screen).
     
     4.  Insert driver diskette into the floppy drive. 
     
     5.  Type INSTALL and press "Enter".
     
         THE SCREEN WILL TEMPORARILY FLASH AND GO BLACK.  PLEASE 
         WAIT FOR THE SOURCE DIRECTORY DIALOG TO APPEAR.
     
     6.  The Installation Program may pause and display prompts to
         overwrite certain files.  Please answer YES for each file.
     
     7.  You will be given a message stating that you "Must
         Shutdown and Restart your system for the changes to take 
         effect".  Click the OK button.
     
     8.  Remove driver diskette from the floppy drive.
     
     9.  Shut down and reboot system.
     
        Note:  You can double click the "System" Icon in the System Setup  
        to change resolution before shutting down.
     
        After you reboot your system will come up with your newly 
        installed driver.
     
     To Change Resolution:
     
     10. To switch resolutions, double click on the "System" icon
         in the System Setup Folder.
     
     11.        Highlight the resolution and close the dialog.
     
     12.        Shut down and reboot.