Subject: About Software Configuration .

This file was written about the software configuration of the mkecr5xx.sys.

1. Registory Configuration.

  The following value is set in the registory .

  * ErrorControl Value : REG_DWORD, 1
  * Group        Value : REG_SZ,    "SCSI miniport"
  * Start        Value : REG_DWORD, 0
  * Type         Value : REG_SZ,    1

2. HW_INITIALIZATION_DATA Configuration

  * HwInitializationDataSize 	: sizeof(HW_INITIALIZATION_DATA)
  * HwFindAdapter     		: MkeCr5xxFindAdapter;
  * HwInitialize      		: MkeCr5xxInitialize;
  * HwStartIo         		: MkeCr5xxStartIo;
  * HwResetBus        		: MkeCr5xxResetBus ;
  * HwInterrupt		  	: NULL
  * MapBuffers 		  	: TRUE
  * NeedPhysicalAddresses 	: FALSE
  * DeviceExtensionSize		: 76
  * SpecificLuExtensionSize	: 72
  * AdapterInterfaceType  	: Isa
  * NumberOfAccessRanges  	: 1
  * SrbExtensionSize		: 12


3. PORT_CONFIGURATION_INFORMATION Configuration

  * MaximumTransferLength	: 64 * 1024
  * NumberOfAccessRanges	: 1
  * AccessRanges[0].RangeStart	: ScsiPortConvertUlongToPhysicalAddress(
					"The recognized address"
				  )
  * AccessRanges[0].RangeLength	: 4
  * AccessRanges[0].RangeInMemory : FALSE
  * NumberOfBuses 		: 1
  * InitiatorBusId[0]		: Set to 7 if it's not initialized.
				  Not set if it's initialized.
  * InterruptMode		: Latched
  * BusInterruptLevel		: 0
  * BusInterruptVector		: 0