//============================================================================
//
//  Copyright (c) 1994 Aztech Systems Ltd.
//
//	Aztech IDE CD-ROM Device Driver Version 0.10 for Windows NT 3.1 README FILE
//
//============================================================================



I. Install Aztech IDE CD-ROM Drive to Existing Windows NT 3.1 System
--------------------------------------------------------------------

	1)	Boot up the Windows NT 3.1 system. Login as Administrator
		(or an account with the same privileges as the Administrator)  

	2)	Insert the Aztech IDE CD-ROM Driver diskette into the floppy drive A:.
		Type A:SETUP to setup the CD-ROM Driver.

	3)	After SETUP is done, shut down and restart your system.



NOTE:
-----
	
	1)	If you are upgrading this version of the driver to a previous version and
		the previous version is already loaded in your system, you need to do the
		following:
		
		a) Open "Control Panel".
		b) Run "Devices" program by double clicking the "Devices" icon.
		c) Select device "aztidecd", then click the "Startup..." button.
		d) Check the "Disabled" button, and click "OK" button.
		e) Click "Close" button in "Devices" program.
		f) Shutdown and beboot the system.
		g) Follow the instruction in II.