//
// $Id: cticonf.ms@ 1.2 1992/11/11 01:17:51 van Stable $
//
// Copyright (C) 1992 Cornerstone Technology.
//
// $Log: cticonf.ms@ $
// Revision 1.2 1992/11/11 01:17:51 van
// update wait message
//
// Revision 1.1 1992/11/03 01:31:44 kevin
// Initial revision
//
//
// Messages file for CTICONF
// Entries consist of a one, two, or three digit message number (with no
// leading 0s), followed by the corresponding "C" printf format string
// surrounded by double quotes. \n and other escape sequences are as
// defined in "C".
40 "No"
41 "Yes"
42 "Nn0" // No answers
43 "Yy1" // Yes answers
44 "Fatal Error"
50 "Disabled"
51 "Enabled"
52 "VGA Display"
53 "ImageAccel Display"
100 "ID/Rev=%d%04d/%d %dx%d %d-plane MonitorType=%d/%d\n"
101 "DOS version %d.%d\n"
102 "\nCan't access %s - %s.\n"
103 "\nCan't read %s - %s.\n"
104 "\n%s is not a valid configuration file.\n"
105 "Read %s\n"
106 "\nCan't create %s - %s.\n"
107 "\nCan't write %s - %s.\n"
108 "Wrote %s.\n"
109 "Configuration has changed.\n"
110 "\nCan't find font file %s.\n"
111 "No mouse driver is available.\n"
112 "Got CTIDRVR table (%04X:%04X).\n"
113 "Activating CTIDRVR/CTITSR.\n"
115 "\nCan't open CTIDRVR - %s.\n"
116 "\nCan't get CTIDRVR table - %s.\n"
117 "\nWrong version of CTIDRVR table - 0x%04X\n"
118 "\nInitializing ImageAccel Display. Please Wait (up to 2 minutes)...\n"
119 "\nNo Configuration Profile available for\n ID/Rev=%d%04d/%d, MonitorTypeCode=%d.\n\a"
120 " Press any key to continue... "
121 "\n%d is not a valid entry. Enter a number from %d to %d.\n"
122 "\nA current version of the CTIDRVR.SYS driver is not specified in CONFIG.SYS.\n"
123 "\n Continue execution?"
124 "\nNumber of planes can be 1, 2 or 4 if so configured, but never 3.\n"
125 "CTICONF (%s)\n"
126 "Found %s "
127 "\n OK to reinitialize?"
128 " %4d"
129 "Please exit Windows before running CTICONF.\n"
130 "CTITSR is NOT loaded!\n"
131 "CTITSR is loaded but inactive.\n"
132 "CTITSR is loaded and active.\n"
133 "CTITSR is loaded. Shutdown/Reset requested.\n"
134 "CTITSR is loaded and in unknown state.\n"
135 "CTITSR is loaded and in unknown state.\n"
140 "\nMonitor Type: %d"
141 "\nPlease specify the type of monitor you are using.\n"
201 " Board ID %4d%04d\n"
202 " Board revision class %4d\n"
203 " Version of video struct %4d\n"
204 " Board revision level %4d\n"
205 " I/O Address 0x%04X\n"
206 " Monitor Type Jumpers %4d\n"
207 " Memory seg addr 0x%04X\n"
208 " Monitor Type Code %4d\n"
209 " Horizontal size (pixels) %4d\n"
210 " Vertical size (pixels) %4d\n"
211 " Horizontal resolution, DPI %4d\n"
212 " Vertical resolution, DPI %4d\n"
213 "\n Available Graphics Modes "
214 " Horizontal size (pixels) "
215 " Vertical size (pixels) "
216 " Horizontal resolution, DPI "
217 " Vertical resolution, DPI "
218 " Screen Saver timeout %4d\n"
219 " Screen Saver type %4d\n"
220 "\n Default Graphics Mode %4d\n"
221 " Number of planes %4d\n"
222 " VGA frame grab capable? %4s\n"
223 " VGA frame grab enabled? %4s\n"
224 " Video Planes (pixel depth) "
226 " Slot number %4d\n"
227 " Overscan capable? %4s\n"
228 " Overscan enabled? %4s\n"
229 " Ext-mode Windows Active? %4s\n"
230 " Windows version %d.%02d\n"
231 " OEM bytes 0-7: 0x%02hX 0x%02hX 0x%02hX 0x%02hX 0x%02hX 0x%02hX 0x%02hX 0x%02hX\n"
232 " Windows Active? %4s\n"
250 " Keyboard interrupts %8ld\n"
251 " Mouse interrupts %8ld\n"
252 " Timer tick interrupts %8ld\n"
253 " Windows activations %4d\n"
254 " Count of VGA \"touches\" %8ld\n"
255 " Mouse driver version %d.%02X type: %d IRQ: %d\n"
256 " Compatible mouse driver not loaded.\n"
300 "Black"
301 "Dark Red"
302 "Dark Green"
303 "Brown (Dark Yellow)"
304 "Dark Blue"
305 "Dark Magenta"
306 "Dark Cyan"
307 "Light Gray"
308 "Dark Gray"
309 "Light Red"
310 "Light Green"
311 "Light Yellow"
312 "Light Blue"
313 "Light Magenta"
314 "Light Cyan"
315 "White"
316 "Desktop Color"
401 "ImageAccel Configuration Manager (%s)\n"
402 "Active Text Display: %s\n"
409 "Overscan: %s\n"
411 "Selected Graphics Resolution %dx%d\n"
415 "Screen Saver: Disabled\n"
416 "Screen Saver: Blank after %d minutes\n"
417 "Screen Saver: Bounce after %d minutes\n"
421 "Save Configuration and Exit"
422 "Change Active Text Display"
423 "Change Monitor Type"
424 "Change Color Mapping"
425 "Change Screen Saver Settings"
426 "Change Active Graphics Display"
429 "Change Overscan"
431 "Change Graphics Mode"
439 "Display Test Pattern"
440 "\nEnter number for action to be taken: %0d"
441 "\nColor number to change (press enter for none)"
442 "Screen Saver monitor mouse activity:"
443 "Screen Saver type (0-Blank, 1-Bounce): %d"
445 "\nScreen Saver timeout in minutes, or zero to disable: %d"
446 "Active Graphics Display (0, 1, ..): %d"
449 "\nGraphics Mode: %d"
451 "Enter grayscale value from 0 (Black) to 15 (White): %d"
// Help text displayed in response to CTICONF /?
500 "Usage: CTICONF /bdimtv2 commands\n"
501 " b: Batch - no interactive questions\n"
502 " d: Diagnostics - memory test and test pattern\n"
503 " i: Initialize - don't read CTICONF.CFG\n"
504 " m: Mouse - screen saver looks at mouse (use with i option)\n"
505 " t: Temp - don't update CTICONF.CFG\n"
506 " v: Verbose - display extra messages and options\n"
507 " 2: 2nd display - check for second ImageAccel display\n"
508 "Commands: (except for A, affect only active graphics display)\n"
509 " An Active graphics display - n is 0 to 7\n"
510 ""
511 " Dn Display - n is 7-Mono VGA, 8-Color VGA\n"
512 " Gn Palette - n is 0 to 2\n"
513 " Hn High-Resolution Mode number - n is 0 to 3\n"
514 " On Overscan - n is 0-off, 1-on\n"
515 " Pn Planes to activate - n is 1, 2, or 4\n"
516 ""
517 " Smnn Screen Saver - nn is 0-off, 1-60-timeout in minutes\n"
518 " m is 0-blank, 1-bounce\n"
519 " Tn Active text display - 0-VGA, 1-ImageAccel\n"
520 ""
521 ""
522 ""
523 "" // up to 24 lines of help text
// Error messages 0 to -199 are entered here as 800 to 999
900 "Unknown Flag on command line."
901 "Run CTICONF.EXE -I to re-initialize."
902 "Can't find any ImageAccel Video Controller."
903 "Numeric value too big in Command line Command."
904 "Unknown Command on command line."
906 "Can't access all expected planes of Video RAM."
907 "Command line Commands have one letter immediately
followed by decimal digit(s)."
908 "Unrecognized Board_ID, Board_Revision, or Monitor_Type."
910 "CTITSR won't go inactive."
911 "CTIDRVR table has become corrupted."
912 "CTITSR is in an unexpected state."
913 "CTIDRVR lockCnt unexpected."
919 "BAD_PARAM"
920 "BAD_COORDINATES"
921 "BAD_RUN_DATA"
922 "CANT_FMALLOC"
923 "BAD_ROP"
924 "BAD_SRCWIDTHBYTES"
925 "BAD_CTIVID"
926 "NO_DATA"
927 "BAD_SCALE_RATIO"
928 "BAD_BANDING"
929 "FBT_FULL"
930 "NOT_CTIF_FILE"
931 "DAMAGED_CTIF_FILE"
932 "NOT_FONT_FILE"
933 "NO_FONT_LOADED"
934 "NO_VGA_CONNECTED"
935 "BAD_SIGNATURE"
936 "BAD_VRAM"
937 "CTI_ERC_CTIDRVR_NOT_LOADED"
938 "CTI_ERC_CTIDRVR_NOT_INITIALIZED"
