; Intel EtherExpress(TM) 10 ISA LAN Adapter
; Copyright 1994 - 1996 Intel Corporation.  All Rights Reserved.
;
;  File Date: 10/01/96
;  File Version: 1.00
;  File Name: !INT1100.CFG

BOARD
	ID = "INT1100"
	NAME = "Intel EtherExpress(TM) 10 ISA LAN Adapter"
	MFR = "INTEL"
	CATEGORY = "NET"
	SLOT= ISA8OR16
	SKIRT = NO
	READID = NO
	IOCHECK = INVALID
	DISABLE = SUPPORTED

	COMMENTS = "\nIntel EtherExpress(TM) 10 ISA LAN Adapter Configuration File V1.00\n\n
		The Intel EtherExpress(TM) 10 ISA LAN Adapter is an ISA adapter. 
		Use this file to select settings for the adapter and write them down. 
		Then run EX10Set and configure the adapter with the settings you
		chose."

	HELP = "Press ENTER to review and configure these items:\n\n
	\to I/O Address\n 
	\to Interrupt Request Number"

	SOFTWARE(1) ="Run EX10SET.EXE and configure this adapter with the 
		following settings:\n"

; INCLUDE="INT1100.OVL"
; BEGINOVL


FUNCTION = "I/O Address"

HELP =  "I/O ADDRESS assigns a 16-byte block of input/output addresses 
	used to transfer data between the adapter and the computer.
	Select an I/O address not used by any other device in the computer.
	If two boards share the same I/O addresses, neither will work
	correctly."
			
COMMENTS = "Select an I/O Address not used by other boards."

    CHOICE="300-30F (Default)"
      LINK
      PORT=300h-30Fh
      INIT=SOFTWARE(1) "\tI/O Address: 300"

    CHOICE="200-20F"
      LINK
      PORT=200h-20Fh
      INIT=SOFTWARE(1) "\tI/O Address: 200"

    CHOICE="210-21F"
      LINK
      PORT=210h-21Fh
      INIT=SOFTWARE(1) "\tI/O Address: 210"

    CHOICE="220-22F"
      LINK
      PORT=220h-22Fh
      INIT=SOFTWARE(1) "\tI/O Address: 220"

    CHOICE="230-23F"
      LINK
      PORT=230h-23Fh
      INIT=SOFTWARE(1) "\tI/O Address: 230"

    CHOICE="240-24F"
      LINK
      PORT=240h-24Fh
      INIT=SOFTWARE(1) "\tI/O Address: 240"

    CHOICE="250-25F"
      LINK
      PORT=250h-25Fh
      INIT=SOFTWARE(1) "\tI/O Address: 250"

    CHOICE="260-26F"
      LINK
      PORT=260h-26Fh
      INIT=SOFTWARE(1) "\tI/O Address: 260"

    CHOICE="280-28F"
      LINK
      PORT=280h-28Fh
      INIT=SOFTWARE(1) "\tI/O Address: 280"

    CHOICE="290-29F"
      LINK
      PORT=290h-29Fh
      INIT=SOFTWARE(1) "\tI/O Address: 290"

    CHOICE="2A0-2AF"
      LINK
      PORT=2A0h-2AFh
      INIT=SOFTWARE(1) "\tI/O Address: 2A0"

    CHOICE="2B0-2BF"
      LINK
      PORT=2B0h-2BFh
      INIT=SOFTWARE(1) "\tI/O Address: 2B0"

    CHOICE="2C0-2CF"
      LINK
      PORT=2C0h-2CFh
      INIT=SOFTWARE(1) "\tI/O Address: 2C0"

    CHOICE="2D0-2DF"
      LINK
      PORT=2D0h-2DFh
      INIT=SOFTWARE(1) "\tI/O Address: 2D0"

    CHOICE="2E0-2EF"
      LINK
      PORT=2E0h-2EFh
      INIT=SOFTWARE(1) "\tI/O Address: 2E0"

    CHOICE="2F0-2FF"
      LINK
      PORT=2F0h-2FFh
      INIT=SOFTWARE(1) "\tI/O Address: 2F0"

    CHOICE="310-31F"
      LINK
      PORT=310h-31Fh
      INIT=SOFTWARE(1) "\tI/O Address: 310"

    CHOICE="320-32F"
      LINK
      PORT=320h-32Fh
      INIT=SOFTWARE(1) "\tI/O Address: 320"

    CHOICE="330-33F"
      LINK
      PORT=330h-33Fh
      INIT=SOFTWARE(1) "\tI/O Address: 330"

    CHOICE="340-34F"
      LINK
      PORT=340h-34Fh
      INIT=SOFTWARE(1) "\tI/O Address: 340"

    CHOICE="350-35F"
      LINK
      PORT=350h-35Fh
      INIT=SOFTWARE(1) "\tI/O Address: 350"

    CHOICE="360-36F"
      LINK
      PORT=360h-36Fh
      INIT=SOFTWARE(1) "\tI/O Address: 360"

    CHOICE="370-37F"
      LINK
      PORT=370h-37Fh
      INIT=SOFTWARE(1) "\tI/O Address: 370"

    CHOICE="380-38F"
      LINK
      PORT=380h-38Fh
      INIT=SOFTWARE(1) "\tI/O Address: 380"

    CHOICE="390-39F"
      LINK
      PORT=390h-39Fh
      INIT=SOFTWARE(1) "\tI/O Address: 390"

FUNCTION = "Interrupt"

HELP =  "INTERRUPT assigns the interrupt (IRQ) that the adapter uses to
	request attention from the computer. 
	Select an IRQ not used by any other device in the computer.
	If two boards share the same IRQ, neither will work correctly."

COMMENTS = "Select an interrupt not used by other boards."

	CHOICE = "IRQ 5 (Default)"
	LINK
	IRQ = 5
	SHARE = NO
	INIT=SOFTWARE(1) "\tIRQ:         5"

	CHOICE = "IRQ 3"
	LINK
	IRQ = 3
	SHARE = NO
	INIT=SOFTWARE(1) "\tIRQ:         3"
	
	CHOICE = "IRQ 9"
	LINK
	IRQ = 9
	SHARE = NO
	INIT=SOFTWARE(1) "\tIRQ:         9"

	CHOICE = "IRQ 10"
	LINK
	IRQ = 10
	SHARE = NO
	INIT=SOFTWARE(1) "\tIRQ:         10"
					
	CHOICE = "IRQ 11"
	LINK
	IRQ = 11
	SHARE = NO
	INIT=SOFTWARE(1) "\tIRQ:         11"

; ENDOVL