ÚÄÄÄÄÄÄ¿ ÚÄÄÄÄÄ¿ ÚÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄ¿ ÚÄÄÄÄÄ¿ ÚÄ¿ À¿ ÚÄ¿ ³ ³ ÚÄÄÄÙ À¿ ÚÄ¿ ³ À¿ ÚÄ¿ ³ ³ ÚÄÄÄÙ ³ ³ ³ ÀÄÙ ³ ³ ³ ³ ÀÄÙ ³ ³ ÀÄÙ ³ ³ ÀÄÄÄ¿ ³ ³ ³ ÚÄ¿ À¿ ³ ³ ³ ÚÄ¿ ³ ³ ÚÄ¿ ³ ÀÄÄÄ¿ ³ ³ ³ ÚÙ À¿À¿ À¿ ³ ÀÄÄÄ¿ ÚÙ ÀÄÙ ³ ÚÙ ÀÄÙ ³ ÚÄÄÄÙ ³ ³ ÀÄÄ¿ ÀÄÄÄÙ ÀÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÄÄÙ BBS Lister for PCBoards 15.2 + Version 1.00 (Compiled with PPLC v3.10) An RCSoft(c)1996 Release ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º INTRODUCTION: º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Welcome to RCBBSL ! This PPE was originated to incorporate the new look of BBS systems today. The advent of InterNet and its popularity has caused many BBSs to add InterNet connectivity to their systems. Some have added UseNet groups while others have added inbound telnet ability. Even more aggressive is the addition of SLIP/PPP for users to connect to the InterNet through the local BBS. BBS Listers that I had seen did not have this information available so I wanted to get the information out the best way I knew how. Thus the birth of RCBBSL. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º INSTALLATION: º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Installation is very simple! Just add a command to your CMD list and you're done! If you are running menus via MKPCBMNU you can add it there as well. Either way will work just fine. It's all up to the way you want your system to work. Here is an example of a CMD.LST File! *******************Line 19 shows the entry for RCBBSL******************** ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º File Locations º º º º Command Security PPE/MNU File -or- Keystroke Replacement º º ÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÍÍÍÍÍÍÍÍ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ  º 13) CBV 15 C:\PCB\PPE\CBV\CBV.PPE ± º 14) REGISTER 10 C:\PCB\PPE\REG\REG.PPE ± º 15) CALLS 30 C:\PCB\PPE\CALLERS\CALLERS.PPE ± º 16) ALLFILES 20 C:\PCB\PPE\CMFL\CMFL.PPE ± º 17) FILELIST 20 C:\PCB\PPE\CMFL\CMFL.PPE ± º 18) TEST 20 C:\PCB\PPE\TEST\TEST.PPE ± º 19) BBSL 20 C:\PCB\PPE\BBSL\BBSLIST.PPE ± º 20) PREDIR 110 \PCB\PPE\DIRLIST\PREDIR.PPE ± º 21) DIR 110 \PCB\PPE\DIRLIST\DIRLIST.PPE CONF0.CFG ± º 22) DIRS 110 C:\PCB\PPE\DIRS\DIRS.PPE ± º 23) R 15 C:\PCB\PPE\MSCAN\READ.PPE ± º 24) QWK 15 C:\PCB\PPE\QWK\QWK.PPE ± º 25) Z 15 C:\PCB\PPE\ZIP\ZIPPER.PPE ± º ± º ± º ± º ± º  º ESC=Exit Alt-R=Repeat a Line Alt-I=Insert a Line Alt-D=Delete a Line º ÈÍÍ 19:11:59 ÍÍÍ 01-20-96 ÍÍÍÍÍÍ F1 Í help ÍÍÍÍ caps: OFF num: OFF ins: OFF ͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º CONFIGURATION: º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BBSLIST.CFG The configuration file is very simple also. It only contains your BBS name and the registration number. If you are not registered just leave the entry as it appears when you look at it. You can change the BBS name to yours. It will appear in the menus and the listings as listed in your PCBoard Config file. This listing is only used to check for registration. But it is case sensitive upon registration. LIST.DBF This the the dBase III+ compatible database file. You can edit with dbase III+ but do not change any field identifiers. Only change the information contained within the field as needed. The next release of RCBBSL will contain an online editor so you can update much easier. HISTORY.DOC Listing of PPE history with changes and additions. RCBBSL.DOC The file you are viewing now. BBSLIST.DSP This is the file that is automatically updated with the full BBS listing. In ASCII format it is also the one that is downloaded by the user via the download function of the PPE. You may delete BBS entries as you wish. QUICK.LST This is the short BBS Listing that is automatically updated. You may edit as you wish to delete BBS listings. *.MNU All of the main menu files. These files may be altered in any way you wish. The MAIN.MNU file is the first seen. The MAIN1.MNU is what is momentarily seen before executing the command from the main menu. Its purpose is just to show the pushing of the button corresponding to the command chosen. So if you change the MAIN.MNU file you should also change the other menu files to correspond to that change. The showing of the MAIN1-6 files is hard coded into the PPE. BBSLIST.PPE The PPE executable file. DISPLAY.SCR This file is viewed when a caller adds a BBS to the listing. You may change the colors etc as you wish. The only limit is that from the ":" to the next listing to the right (or the edge) is reserved for input information. Also the information requested may not be changed. The internally coded showing of the BBS Listing uses this same look but can not be changed. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º DISPLAYS AND COMMANDS: º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 1) Main Menu ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ RCBBSL 1.0 GigaByte Gold BBS ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Full BBS Listing ³ ³ Add BBS to Listing ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Perform Search Routine ³ ³ Download BBS Listings ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Short BBS Listing ³ ³ Quit to Main Menu ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Thank You For Using RCBBSL - Another RCSoft PPE ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Main Menu Commands: (F) = Gives a listing of all BBSs that have entered information. (P) = Perform search on list with user input strings. (S) = Gives a short version of the BBS List - Name - Phone # - Location (A) = Add a BBS to the listing. (D) = Download the long version of the BBS listings. (Q) = Quit back to the bbs menu this PPE was started from. 2) View of the Short BBS List: ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄ¿ ³ BBS Name ³ Phone Number ³ City ³ State ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄ´ ³ GigaByte Gold BBS ³ (704)566-8077 ³ Charlotte ³ NC ³ ³ Some Other BBS ³ (704)555-1234 ³ Sidney ³ NC ³ ³ A Much Better BBS ³ (704)555-5678 ³ Monroe ³ NC ³ ³ Best of the Best BBS ³ (704)555-9012 ³ Matthews ³ NC ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÙ 3) View of Full BBS Listing: ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ RCBBSL 1.0 GigaByte Gold BBS ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ BBS Name :GigaByte Gold BBS InterNet (Y/N)...... :Yes BBS Software.... :PCBoard 15.22 Domain Name : gg.com # of Nodes...... :50 UseNet (Y/N)........ :Yes Phone Number ... :(704)566-8077 # UseNet Groups..... :2500 City ........... :Charlotte InterNet E-Mail (Y/N):Yes State .......... :NC PPP/SLIP Access (Y/N):No Max Modem Speed. :14400 Telnetable (Y/N) ... :No Subscription(Y/N):Yes Telnet Address: Subscription Cost:$20/6mth $35/y Additional Information: # of Msg Areas.. :3800 Home of RCSoft PPEs for PCBoard. # of Doors...... :1 Free access on first call. # of Files...... :50000 Satellite Connected. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Thank You for Using RCBBSL - Another RCSoft PPE ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ As you can see, the entire right hand side of the display concerns InterNet abilities of the BBS described. This is the information users now want to know and the purpose of putting out this PPE. 4) Searching The BBS List Search Menu: ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ RCBBSL 1.0 Your Bulletin Board System Name ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Name Search ³³ State Search ³³ Email Search ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Area Code Search ³³ Internet Search ³³ PPP Search ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ City Search ³³ Usenet Search ³³ Telnet Search ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Thank You For Using RCBBSL - Another RCSoft PPE ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Included search routines by: ************ All inputs are case sensitive searches ************* 1. Name : Up to 28 Characters in the name 2. City : Up to 16 Characters in the name 3. State : Up to 3 Characters in Abbreviation 4. Phone area code: Up to 14 Characters will be searched 5. InterNet (Y/N) : Up to 3 Characters (Yes or No) 6. UseNet (Y/N) : Up to 3 Characters (Yes or No) 7. E-Mail (Y/N) : Up to 3 Characters (Yes or No) 8. PPP/SLIP (Y/N) : Up to 3 Characters (Yes or No) 9. Telnetable (Y/N) : Up to 3 Characters (Yes or No) ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º SUPPORT: º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Support is available via one of the following: GigaByte Gold BBS (704)566-8077 E-Mail at ray.crittenden@gg.com. FidoNet: 1:379/32. Voice: (704)566-8017 (LAST RESORT!) Snail Mail: Ray Crittenden 2901 Rural Hill Ct Matthews, NC 28105 I also monitor the PCBoard echoes from FidoNet. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º REGISTRATION: º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Registration for RCBBSL is only $5.00. I believe that PPEs which require more than a few lines are worth a little something to the author. $5.00 isn't much to ask for continued support and keeping the author interested in making updates to more than just his own system. Registration will remove the unregistered delay when opening the PPE. Other than this delay all other functions work. It also entitles you to all future updates to RCBBSL. To register send the name of your BBS as it will appear in the configuration file. The registration number is generated with case sensative checking. This is very important as your PPE will not work unless this is correct. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º DISCLAIMER: º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ You are permitted to use RCBBSL for a period of 30 days for evaluation purposes. After this period RCBBSL must be registered or removed from your system. Using RCBBSL on more than 1 BBS or sharing registration information is expressly prohibited. You agree that Ray Crittenden and/or RCSoft makes no warantees of any kind, expressed or implied, with regard to the quality, performance, accuracy or fitness of this PPE. In no event is Ray Crittenden and/or RCSoft liable to you for any damages, including any lost profits, lost savings or any other incidental or consequential damages arising from your use and inability to use RCBBSL. Thanks and Enjoy