컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 굉�[PWA]殯굅 The Depository Bank v1.06 갚꿇[PWA]殯� 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 뇌頰頰頰頰頰The Depository Bank v1.06頰頰頰頰頰頰� cracked by: spectrum � 뇌頰頰頰頰頰頰頰頰�[08/21/95]頰頰頰頰頰頰頰頰頰頰� of pwa � 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 굉� PROGRAM SUMMARY 殯굅같같같같같같같같같같같같같같같같같같같같같같같같같같같� 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� A .PPE compiled in PPLC v3.0 for PCBoard v15.2+ BBS. This is the Depository Bank, a time bank PPE, written by Robert Watson and Robert Jackson. It is of course registered. All delays are taken out. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 굉� INSTALLATION 殯굅같같같같같같같같같같같같같같같같같같같같같같같같같같같같같 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� This PPE should be installed through the command list file. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� Installing through CMD.LST: Just installs it as a command. 1. Run PCBSETUP 2. Press B ( File Locations ) 3. Press B ( Configuration Files ) 4. Scroll down to "CMD.LST" and press F2 5. Put the command in as you like. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 굉� CONCLUSION 殯굅같같같같같같같같같같같같같같같같같같같같같같같같같같같같같같 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� This is one of the "better" timebank PPEs. It has some different ansis, but the PPE might look decent if they were changed. There's nothin different about this than any other one, so i'll leave it up to you to figure it out. -for tech support reach me on PPEnet- 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 굉�1995殯굅같같같같같같같같같같같같같같같같같같같같같같같같같같같갚꿇 殯� 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴�