SYSOP MAIL 1.0  BY MR.JETS
--------------------------

Sysop Mail is a standard "comment" replacement for PC Board 15.21
and newer versions. However, with this PPE you may add a bit
more information about the sysops, than other "C" replacements
can offer. At the right of each sysop, the "position" of the sysop
is displayed and on the right side of that, a "comment" of the sysop 
is display. (This might sound a bit peculiar, but check confguration
file, and you'll understand)
The sysops are of course marked with a lightbar, and the length
is selectable. 
Finally a message is shown at the lower part of the screen, where you 
can for example add some general information about the sysops.
The name of this message is SMAIL.MSG.

Installation
------------

Just do the following, and you'll running within some seconds... 

1 Add SMAIL.PPE to you CMD.LST (the key should be "C" of coz..)

2 Edit the lines in SMAIL.CFG (explained in the file)

3 Edit the message at the lower part of the screen (SMAIL.MSG).
  Remember that the length of this message will descrease if 
  you have many sysops.


                                      
                        MR.JETS/[ELT]     /  30th of August 1995