_________________  _____________ ___ .______________ _____________._____:_
. \    _____,     / /   _____,    '   ^\   _____,     ^\           /       /
: /  ____)_/   __/_/  ____)_/          / ____)_/    /   \_      __/ ,_____/
|/        ^\  '    ^\       \   \/    /        \   /    //     /_\______^\:
/          /        /       /   /    /         /  /    //     //         /|
\_________/________/_______/___/    /\________/__/    / \____/ \________/ |
`----------------------------- \___/ -->f!/opx<- \___/ -------------------'

       ϊΔΔΝΝΝ΅ΟΝΝ( LAST TRANSFERS 1.2  BY MR.JETS/[ELT] )ΝΝΟΖΝΝΝΔΔϊ
                   



ϊΔΔΝΝΝ΅ΟΝΝ( FEATURES )ΝΝΟΖΝΝΝΔΔϊ


          This PPE simply displays the last transfers with handles, 
          cps rates, date/time..etc
          The number of transfers displayed is configurable up to 100.

          Unlike some other slow ppes, this is exe-driven and will
          with no problems handle transfer logs on 1 meg or more.
          
          New in v1.2: Multiple configurations  
                       New graphics (7 examples, PCB and /X style)
                       More configurable than before
                       Bugfixed




ϊΔΔΝΝΝ΅ΟΝΝ( CONFIGURATIONS )ΝΝΟΖΝΝΝΔΔϊ

          
          This version of Last Transfers supports 1 to 9 configurations.
          
          A configuration consists of one display file (eg. L-TRANS1.PCB)
          and a file with settings. (eg. L-TRANS1.CFG)
          
        
        ( The .PCB file may be as many lines as you want, since the ppe will )
        ( print the data after the end of it.                                )
          
        ( The .CFG file contains 14 various options, it's further explained  )
        ( in the configuration file.                                                       )
          
          
          After having decided how many configurations you want to use,
          enter the number on the first line in MAIN.CFG.
          
          If you just want to use ONE configuration, enter the number
          of it after the ppe. (The configuration in MAIN.CFG will be ignored)
          This might also be useful when you're installing the ppe for the
          first time and want to check all configurations and ansis.
          Enter like this...

           -> C:\PCB\PPE\LAST\L-TRANS.PPE 3
          
          ( With this syntax L-TRANS3.PCB will be displayed and followed
            by the last transfers configured in L-TRANS3.CFG)
        
        
        


ϊΔΔΝΝΝ΅ΟΝΝ( HOW TO MAKE IT PURE /X STYLE )ΝΝΟΖΝΝΝΔΔϊ
        
          
          As mentioned above, enter the parameter "6" since this is the
          /x style configuration supplied with this package.
          
          -> C:\PCB\PPE\LAST\L-TRANS.PPE 6




ϊΔΔΝΝΝ΅ΟΝΝ( INSTALLATION )ΝΝΟΖΝΝΝΔΔϊ

        
        1. Insert L-TRANS.PPE in CMD.LST or wherever you want,
           
        2. Decide wether you want to use all configurations supplied,
           or a single, and follow the instructions under the headline
           CONFIGURATIONS.

        3. Make sure you have a complete path to DOWNLOAD.TXT in pcbsetup
           otherwise it won't work so good.


ΪΔΝΝΔΝΔΝΝΝΝΝΝΔΝΝΔΔ
³    PPE IDEAS, ETC... Suggestions for new PPEs are always welcome.
ΐΔΝΔΝΔΝΝΝΝΝΝΝΝΝΝΝΝΔΝΝΔ Contact me on any major Elements board...
                       (c) MR.JETS 1996