
                    ﾚｿ ﾚﾂﾄｿ ｿ ﾚﾄﾂﾂﾄｿ ﾚﾂﾄﾄｿ ﾚｿ    ﾚﾂﾄﾄｿ ﾚﾂﾄﾄｿ
                    ﾃｴ ﾃｴ ｳ ｳ   ﾃｴ   ﾃﾅﾄ   ﾃｴ    ﾃﾅﾄ   ﾃｴ
                    ﾀﾙ ﾀﾙ ﾀﾄﾙ   ﾀﾙ   ﾀﾁﾄﾄﾙ ﾀﾁﾄﾄﾙ ﾀﾁﾄﾄﾙ ﾀﾁﾄﾄﾙ
               ﾚﾂﾄﾄｿ ﾚﾂﾄﾄｿ ﾚﾂﾄﾄｿ ﾚﾄﾂﾂﾄｿ ﾚｿ   ｿ  ﾚﾂﾄｿ  ﾚﾂﾄｿ  ﾚﾂﾄﾄｿ
               ﾀﾁﾄﾂｿ ﾃｴ  ｳ ﾃﾅﾄ     ﾃｴ   ﾃｴ ｿ ｳ ﾚﾅﾁﾄﾁｿ ﾃﾅﾄﾁｿ ﾃﾅﾄ
               ﾀﾄﾄﾁﾙ ﾀﾁﾄﾄﾙ ﾀﾙ      ﾀﾙ   ﾀﾁﾄﾁﾄﾙ ﾀﾙ   ﾙ ﾀﾙ  ﾙ ﾀﾁﾄﾄﾙ
                I  n  t  e  l  e  c       S  o  f  t  w  a  r  e 

 ﾚﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿ
 ｳ Pro-Vote                                                                   ｳ
ﾚﾁﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿｳ
ｳPro-Vote, supports as many as *999* different polls! Also a results bulletinｳｳ
ｳis definable!  A maintenance module is included  to make adding, deleting orｳｳ
ｳresetting polls much easier! Login poll availability can show users at logonｳｳ
ｳwhich poll(s) they have yet to respond to!  Displays the percent of votes asﾃﾙ
ｳbar graphs. Pro-Vote even let's you allow users to add their very own polls ｳ
ｳand "write-in" answers!                                                     ｳ
ﾀﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾙ

     ﾚﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿ
     ｳ Installation                                              Pro-Vote ｳ
     ﾀﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾙ

     If you are upgrading, be sure not to overwrite your existing
     QUESTION and NAMELIST files!!!

     Also, once registered, place your PRO-VOTE.KEY (or POWERPAK.KEY) file
     in the same directory as the PPE.

     The installation of Pro-Vote is fairly simple.  Pro-Vote should be in-
     stalled into your CMD.LST  as the command (usually VOTE) that you wish
     to assign to it. The configuration, questionnaire & display files must
     be located in the same directory as the PRO-VOTE.PPE.  A sample config
     file is explained below and must be called PRO-VOTE.CNF.


     The Pro-Vote Config File:

     ﾚﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿ
     ｳ Not Used           ｳ -> The first 2 lines are not used but must exist
     ｳ Not Used           ｳ -> 
 *** ｳ 10                 ｳ -> Maximum Number of Answers per poll
     ｳ Not Used           ｳ -> Line no longer used but must exist          
   * ｳ 0                  ｳ -> No. of polls currently active.*             
     ｳ D:\PCB\BLT\VOTE    ｳ -> The full path/filename of  results bulletin.
  ** ｳ MAKEMENU           ｳ -> To allow Pro-Vote to make menus on the fly.
     ｳ HERBERT BUSHONG    ｳ -> SysOp Name      \    Users to do maintenance
     ｳ JOHN YOUNG         ｳ -> Co-SysOp Name    >   in Pro-Vote. This is an
     ｳ                    ｳ -> 3rd User Name   /    option,  blank if none.
     ｳ 20                 ｳ -> The security level required to add new polls.
     ｳ Y                  ｳ -> Log as a door being opened (Y or N)
     ﾀﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾙ

    * This value is updated by the Maintenence PPE as you add/remove polls
      When you first install, set to 0. If Upgrading, set to the highest
      poll # you have.

   ** With this line set to MAKEMENU, Provote will create the menu for 
      available polls "on-the-fly" (Login display mode is always on-the-fly).
      This handy if you allow users to add polls, since the display will 
      always be accurate. If you would rather create your own display files
      enter the name of the display file on this line. It can have Graphics,
      Language, and security variations.
      
 *** This is the maximum number of answers, and if write-ins are enabled,
     this is still the maximum. Increase it as necessary.

     The Pro-Vote QUESTION (Polls) Files:
        The Maintenance PPE will automatically maintain, add, delete these.
        Do all your maintenance from the M)aintanence option of Pro-Vote.
        

     The Poll NAMELIST  Files:
     Pro-Vote creates these file automatically for every Poll answered so you
     don't have to worry about creating it yourself.

     The poll OPTIONS Files:
      Provote will automatically create these when you add new polls. These
      files contain the "write-in" setting, and the security required
      to allow write-in's if set to Yes. For existing polls that you want to
      start allowing write-ins, you must manually create the file.
      It is a straight text file with the following format:

      OPTIONS.### where ### is the question ### file that these options go with.
      Y             Line 1 - Y/N  Y = Write-ins allowed
      20            Line 2 - Minimum security to allow write-ins

        The security is only used if line 1 is set to Y.


    *** Note: Write-ins will only be allowed up to the maximum number of
      entries defined in the CNF file. To alklow more, increase that number.



     The Bulletin File:
     Pro-Vote creates a bulletin that is updated each time a user exits 
     the PPE.


   Login Display of available/unanswered polls

     Now can be used in the logon files with commandline of 'L' to display 
     to users what polls there are or which they have/haven't answered yet.  
     In one of your Login display Files (LOGON, NEWS, etc...) put the line:

     !D:\PPE\PV\PRO-VOTE.PPE L


   The NOSHOW.LST file
     
       This text file, if exists contains the names of users, one per line,
       that should not be shown the available/unanswered polls during login
       if you use the above method in one of you login display files.



     Maintainence PPE:
    
     The MAINT.PPE is called by Pro-Vote to do all maintanence (Add, Delete,
     Reset Polls). Adding polls is available to those with sufficient 
     security. Resetting and Deleting are only available to those 3 names
     in the config file.

