
                    ﾚｿ ﾚﾂﾄｿ ｿ ﾚﾄﾂﾂﾄｿ ﾚﾂﾄﾄｿ ﾚｿ    ﾚﾂﾄﾄｿ ﾚﾂﾄﾄｿ
                    ﾃｴ ﾃｴ ｳ ｳ   ﾃｴ   ﾃﾅﾄ   ﾃｴ    ﾃﾅﾄ   ﾃｴ
                    ﾀﾙ ﾀﾙ ﾀﾄﾙ   ﾀﾙ   ﾀﾁﾄﾄﾙ ﾀﾁﾄﾄﾙ ﾀﾁﾄﾄﾙ ﾀﾁﾄﾄﾙ
               ﾚﾂﾄﾄｿ ﾚﾂﾄﾄｿ ﾚﾂﾄﾄｿ ﾚﾄﾂﾂﾄｿ ﾚｿ   ｿ  ﾚﾂﾄｿ  ﾚﾂﾄｿ  ﾚﾂﾄﾄｿ
               ﾀﾁﾄﾂｿ ﾃｴ  ｳ ﾃﾅﾄ     ﾃｴ   ﾃｴ ｿ ｳ ﾚﾅﾁﾄﾁｿ ﾃﾅﾄﾁｿ ﾃﾅﾄ
               ﾀﾄﾄﾁﾙ ﾀﾁﾄﾄﾙ ﾀﾙ      ﾀﾙ   ﾀﾁﾄﾁﾄﾙ ﾀﾙ   ﾙ ﾀﾙ  ﾙ ﾀﾁﾄﾄﾙ
                I  n  t  e  l  e  c       S  o  f  t  w  a  r  e 

 ﾚﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿ
 ｳ Page-Me!                                                                   ｳ
ﾚﾁﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿｳ
ｳPage-Me! allows you to let your users reach you @ your numeric pager number!ｳｳ
ｳEach user can assign their own "code" and you can "block out" specific usersｳｳ
ｳfrom using this utility. It has a "time table" file so you can restrict whenｳｳ
ｳit is used.  So even if you only have a LOCAL paging service, LD callers canﾃﾙ
ｳeven page you at your pager! And much more!                                 ｳ
ﾀﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾙ

     ﾚﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿ
     ｳ Installation                                              Page-Me! ｳ
     ﾀﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾙ
     Installation of  Page-Me!  is really very simple.  Page-Me! should be
     installed in your CMD.LST as shown below:

     Command       Security      PPE/MNU File -or- Keystroke Replacement
     =======       ========      ========================================
     PAGE-ME!         40          C:\PCB\PPE\PM\PAGE-ME!.PPE
     Make the security level at whatever you desire and adjust for your paths.
     For more info on CMD.LST see PCB docs.

     If you are NOT setting up Page-Me! for the FIRST time, be careful not to
     over-write any of your files with the lists or time tables that I include
     with the distribution files. I include them as samples and mine may not
     match with yours and I'd hate to see your settings lost or overwritten.
     Make sure you edit your config file appropriately.

     If Registered, place a copy of your PAGE_ME!.KEY (or POWERPAK.KEY) in the
     same directory as the PPE.

     So... unzip the contents of the Page-Me! ZIP to the directory you'll be
     running it from. Then edit the PAGE-ME!.CNF and display screens to your
     BBS.
     ﾚﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿ
     ｳ PAGE-ME!.CNF ｳ
     ﾃﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｴ
     ｳ SYSOP        ｳ  Line  1    TO: Field if Message is to be sent after page
     ｳ 9            ｳ  Line  2    Conference message is sent in  
     ｳ R            ｳ  Line  3    R/N  Message Security              
     ｳ 123-4567     ｳ  Line  4    Your pager phone number
     ｳ 20           ｳ  Line  5    Minimum security level
     ｳ 60           ｳ  Line  6    Maximum security level
   * ｳ REVERSE      ｳ  Line  7    Reverse the function of the bad names list
     ｳ Y            ｳ  Line  8    Y/N Send SysOp a message when page is sent
     ｳ 7            ｳ  Line  9    Days to add to todays date for packout date
     ｳ Y            ｳ  Line 10    Y/N to log as a door being opened
     ｳ ATH1         ｳ  Line 11    Modem String to take modem off hook
     ｳ ATH0         ｳ  Line 12    Modem String to put modem on hook
     ｳ ATDT         ｳ  Line 13    Dial Prefix for modem
  ** ｳ ,,,,         ｳ  Line 14    String to add between number and pager code
     ﾀﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾙ

   * Line 7, the REVERSE entry, allows you to reverse how the BADNAMES.LST
     is used. If you put REVERSE on line 7 then the "bad names" in the list
     will be looked at as "approved for use" names. You'd use this feature
     if you have "fewer" names that you want to allow to use this utility.
     If you want to use the bad names list as just that, then leave line 7
     as blank. Lastly, if you are having messages sent to you they will be
     addressed "from" PAGE-ME! so add this name to your PCBoard TCAN file
     so nobody can logon under that name and read these messages.

  ** This string will be inserted between the number and the pager code.
     In the above config, the full dialing string would be
     ATDT123-4357,,,,code
     where code is the pager code selected.

     ﾚﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿ
     ｳ             TIME            ｳ
     ﾃﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｴ
     ｳ    000000000011111111112222 ｳ
     ｳ    012345678901234567890123 ｳ
     ｳ                             ｳ
     ｳ SU NNNNNNNNNNNNNNNNNNNNNNNN ｳ
     ｳ MO NNNNNNNYYYYYYYYYYYNNNNNN ｳ
     ｳ TU NNNNNNNYYYYYYYYYYYNNNNNN ｳ
     ｳ WE NNNNNNNYYYYYYYYYYYNNNNNN ｳ
     ｳ TH NNNNNNNYYYYYYYYYYYNNNNNN ｳ
     ｳ FR NNNNNNNYYYYYYYYYYYNNNNNN ｳ
     ｳ SA NNNNNNNNNNNNNNNNNNNNNNNN ｳ
     ﾀﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾙ
     Page-Me! a time table similar to FONE-VER to determine if a page is OK
     for a particular time. As you can see above, I have mine set to allow
     pages only between 7am and 6pm Monday through Friday and not at all on
     the weekends. If you do not want to permit calls during a certain time
     place an N in that day's/hour's column. The first column of Y's is at
     00:00 thru 00:59 am, the last column of Y's is 23:00 thru 23:59 pm.

     The top left corner of the block must start at row 4, column 4.


     ﾚﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｿ
     ｳ BADNAMES.LST ｳ  This is a list of names of users you do not want
     ﾃﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｴ  to permit access to Page-Me!. If you use the REVERSE
     ｳ JIM BROWN    ｳ  feature of Page-Me! then these names would be the
     ｳ AL GREEN     ｳ  only names allowed to use this utility unless their
     ｳ RED SKELTON  ｳ  security level was within the minimum and maximum
     ｳ KAREN BLACK  ｳ  security level ranges.
     ﾀﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾙ

     There are a few "display files" used by Page-Me. They are WELC which
     is displayed upon entering the door, and BADNAME which is displayed
     to a user whose name was found in the BADNAMES.LST file. A file called
     BADTIME will be displayed to users who call outside the times that you
     specified in the TIME file.

     Also, files called ########.COD where ######## is a number unique for
     each user to enter a specific code of their choosing or one of your
     "assigning".

     If you want users to be able to pull from a menu of codes that YOU
     have defined, then create these files: MENU and MENU.LST.  MENU is
     the file displayed to users that shows the page reasons that you've
     assigned, and MENU.LST contains the codes corresponding to options
     in the MENU file. See the included MENU/MENU.LST files for details
     on this feature.
     Page-me will not work without these files, so you should have at
     least 1 entry.

     That's about it, it's pretty much straight-forward but if you have
     any questions, feel free to drop me a note on the Intelec Network
     in the IS_Support conference.

     You are permitted to use Page-Me! for a period of 30 days for eval-
     uation purposes, after which it must be registered or removed from
     your system. Registration grants you a license to use Page-Me! on the
     (1) BBS in which it is registered to. We've the right to terminate
     this license if licensee violates this agreement. Using Page-Me! on
     more than one (1) BBS or sharing the registration or validation codes
     constitutes breach of agreement and licensing will be revoked. You
     agree that Intelec Software makes no warranties of any kind,
     expressed or implied, with respect to the quality, performance,
     accuracy, or fitness of Page-Me!. In no event is Intelec software 
     liable to you for any damages, including any lost profits,
     lost savings or other incidental or consequential damages arising from
     your use or inability to use Page-Me!, or for any claim by any other
     party.