0 Insufficient memory for this operation; close one or more Windows applications to increase available memory. 1 Ports Control Panel Applet 2 Close 3 Ports 4 Specifies serial port communications settings. 8 Invalid baud rate; the baud rate must be a positive value. 10 Default 11 ,Even,Odd,None,Mark,Space 12 ,1,1.5,2 13 ,Xon / Xoff,Hardware,None 14 New Port 15 Settings for %s 16 Pressing OK will delete the selected COM port. 17 To delete COM ports, you must be logged onto the Windows NT workstation as an Administrator. 19 Advanced Settings for %s 21 Invalid Base I/O Port Address. 22 There are no Serial Ports which can be setup on this system. 23 There are no user configurable Advanced I/O parameters for this COM port. 24 To change the Advanced I/O settings, you must be logged onto the Windows NT workstation as an Administrator. 25 To create new COM ports, you must be logged onto the Windows NT workstation as an Administrator. 26 The system cannot support a COM port number greater than 256. 27 To create new COM port I/O settings, you must be logged onto the Windows NT workstation as an Administrator. 28 Could not save settings to Registry Serial Parameters area. 29 Communications Port ( 30 Advanced Port Settings 50 System Setting Change 51 Your COM Port settings have changed. \n \n 52 You will need to exit and restart Windows NT so that the new setting can take effect.