2 DHCP Manager 100 Superscopes - %1 101 Create Superscope - %1 102 This operation will delete superscope %1 without deleting any child scopes. Are you sure you want to delete superscope %1? 103 The superscope %1 already exist. 104 Server Properties - %1 200 Boot Image 201 File Name 202 File Server 203 BOOTP Properties 10004 Interrupted system call. 10009 Bad file number. 10013 Access denied. 10014 Bad address. 10022 Invalid argument. 10024 Too many open files. 10035 Operation would block. 10036 Operation now in progress. 10037 Operation already in progress. 10038 Socket operation on non-socket. 10039 Destination address required. 10040 Message too long. 10041 Protocol is wrong type for socket. 10042 Bad protocol option. 10043 Protocol not supported. 10044 Socket type not supported. 10045 Operation not supported on socket. 10046 Protocol family not supported. 10047 Address family not supported by protocol family. 10048 Address already in use. 10049 Can't assign requested address. 10050 Network is down. 10051 ICMP network unreachable. 10052 Network was reset. 10053 Software caused connection abort. 10054 Connection reset by peer. 10055 No buffer space is supported. 10056 Socket is already connected. 10057 Socket is not connected. 10058 Can't send after socket shutdown. 10059 Too many references. 10060 Connection timed out. 10061 Connection refused. 10062 Too many levels of symbolic links. 10063 Name too long. 10064 Host is down. 10065 Host is unreachable. 10066 Directory not empty. 10067 EPROCLIM returned. 10068 EUSERS returned. 10069 Disk quota exceeded. 10070 ESTALE returned. 10071 The object is remote. 10091 System not ready. 10092 Version is not supported. 10093 Not initialized. 10101 Disconnected. 11001 Host not found. 11002 Try again. 11003 Non-recoverable error. 11004 No data record available. 32768 Configure the Dynamic Host Configuration Servers 32769 Run the test routines in DHCPDLL.DLL 32770 Create a new DHCP scope for a sub-net 32771 Edit the properties associated with the current scope 32773 Add a DHCP host server to the list of DHCP servers 32774 Incorporate the highlighted host into the selected scope 32775 Remove the highlighted host from the selected scope 32776 Edit the global client configuration options 32777 Edit the configuration options for clients of this scope 32778 Edit the definitions of option types 32779 Review address allocation policy for the selected scope. 32780 Review current address lease information for the selected scope 32781 Define and maintain default values and option types 32782 Provide textual names for sub-nets (scopes) 32783 Define user names for sub-net identifiers 32784 Maintain the list of recognized vendors 32785 Add reserved clients to this scope 32786 Remove current server support for this scope 32787 Delete the currently selected scope 32788 Activate or de-activate the scope on its server 32789 - 32791 Remove the currently selected DHCP server from the list 32793 Show or hide the status bar 32795 Search for help on a specific item 32797 Edit the properties of the selected DHCP server 32799 Edit the superscopes of the selected DHCP server 57344 DHCP Manager 57345 Ready 57653 Move the split bar 57664 Display program information, version number and copyright 57665 Exit this application and save the settings 57666 Display help contents 57668 Show how to use the help engine 57680 Switch to the next window pane 57681 Switch back to the previous window pane 59001 Pad 59002 Pad byte generated to align other data? 59003 End 59004 Indicates end of options in DHCP packet 59005 Subnet Mask 59006 Subnet mask in network byte order 59007 Time Offset 59008 UCT offset in seconds 59009 Router 59010 Array of router addresses ordered by preference 59011 Time Server 59012 Array of time server addresses, by preference 59013 Name Servers 59014 Array of name servers, by preference 59015 DNS Servers 59016 Array of DNS servers, by preference 59017 Log Servers 59018 Array of MIT_LCS UDP log servers on subnet 59019 Cookie Servers 59020 Array of cookie servers, RFC 865 59021 LPR Servers 59022 Array of RFC 1179 servers, by preference 59023 Impress Servers 59024 Array of Imagen Impress servers 59025 Resource Location Servers 59026 Array of RFC 887 ResLoc servers on subnet, pref 59027 Host Name 59028 Host name for client, RFC 1035 character set 59029 Boot File Size 59030 Size of boot image file in 512-octet blocks 59031 Merit Dump File 59032 Path name for crash dump file 59033 Domain Name 59034 Domain name for client resolutions 59035 Swap Server 59036 Address of client's swap server 59037 Root Path 59038 Path name for client's root disk, char set NVT ASCII 59039 Extensions Path 59040 tftp file for option extensions 59041 IP Layer Forwarding 59042 Dis/enable IP packet forwarding on this client 59043 Non-local Source Routing 59044 Dis/enable non-local datagrams 59045 Policy Filter Masks 59046 Destination/mask IP address pairs to filter source routes 59047 Max DG Reassembly Size 59048 Maximum size datagram for reass. by client; max 576 59049 Default Time-to-live 59050 Default TTL for client's use on outgoing DGs 59051 Path MTU Aging TO 59052 TO in secs for aging Path MTU values; RFC 1191 59053 Path MTU Plateau Table 59054 MUT discovery sizes, sorted by size, all >= 68 59055 MTU Option 59056 MTU discovery size, >= 68 59057 All subnets are local 59058 Client assumes that all subnets are local v/v MTU 59059 Broadcast Address 59060 Broadcast address 59061 Perform Mask Discovery 59062 Client should use ICMP for subnet mask discovery 59063 Mask Supplier Option 59064 Client should respond to subnet mask requests via ICMP 59065 Perform Router Discovery 59066 Client should solicit routers using RFC 1256 59067 Router Solicitation Address 59068 Address to use for router solicitation 59069 Static Route Option 59070 Destination/router address pairs, in priority order 59071 Trailer Encapsulation 59072 Client should negotiate use of trailers (RFC 983) 59073 ARP Cache Timeout 59074 T/O in seconds for ARP cache entries 59075 Ethernet Encapsulation 59076 0=>client should use ENet V2; 1=> IEEE 802.3 59077 Default TTL Option 59078 Default TTL 59079 Keepalive Interval 59080 K/A T/O in seconds 59081 Keepalive Garbage 59082 Send garbage octet 59083 NIS Domain Name 59084 Name of Network Information Service domain 59085 NIS Servers 59086 Addresses of NIS servers on client's subnet 59087 NTP Servers 59088 Addresses of Network Time Protocol servers 59089 Vendor Specific Info 59090 Embedded vendor-specific options 59091 WINS/NBNS Servers 59092 NBNS Address(es) in priority order 59093 NetBIOS over TCP/IP NBDD 59094 NetBIOS over TCP/IP NBDD address(es) in priority order 59095 WINS/NBT Node Type 59096 0x1 = B-node, 0x2 = P-node, 0x4 = M-node, 0x8 = H-node 59097 NetBIOS Scope ID 59098 NetBIOS over TCP/IP Scope ID 59099 X Window System Font 59100 Array of X Windows font servers 59101 X Window System Display 59102 Array of X Windows Display Mgr servers 59103 Lease 59104 Client IP address lease time in seconds. 59105 Renewal (T1) Time Value 59106 Time between addr assignment to RENEWING state 59107 Rebinding (T2) Time Value 59108 Time from addr assignment to REBINDING state 59109 NIS+ Domain Name 59110 The name of the client's NIS+ domain. 59111 NIS+ Servers 59112 A list of IP addresses indicating NIS+ servers. 59113 Enable NBT hostname resolution 59114 0==off 1==on 59115 Enable gethostbyname() WINS resolution 59116 0==off 1==on 59117 Hostname resolution order 59118 0==hosts,1==dns,2==hosts->dns,3==dns->hosts 59119 Domain suffix search order 59120 List of domain suffixes in order (6 max) 59121 Enable WINS proxy agent 59122 0==off 1==on 59123 Boot Server Host Name 59124 TFTP boot server host name 59125 Bootfile Name 59126 Bootfile Name 59127 Mobile IP Home Agents 59128 Mobile IP home agents in priority order 59393 Show or hide the status bar 61184 Change the window size 61185 Change the window position 61186 Reduce the window to an icon 61187 Enlarge the window to full size 61188 Switch to the next document window 61189 Switch to the previous document window 61190 Close DHCP Manager and save the settings 61202 Restore the window to normal size 61203 Activate Task List 61440 Open 61441 Save As 61442 All Files (*.*) 61443 Untitled 61446 an unnamed file 61457 &Hide 61472 No error message is available. 61473 An unsupported operation was attempted. 61474 A required resource was unavailable. 61475 Out of memory. 61476 An unknown error has occurred. 61588 Linked %s 61589 Unknown Type 61696 Invalid filename. 61697 Failed to open document. 61698 Failed to save document. 61699 Save changes to %1? 61700 Failed to create empty document. 61701 The file is too large to open. 61702 Could not start print job. 61703 Failed to launch help. 61704 Internal application error. 61705 Command failed. 61706 Insufficient memory to perform operation. 61707 System registry entries have been removed and the INI file (if any) was deleted. 61708 Not all of the system registry entries (or INI file) were removed. 61712 Please enter an integer. 61713 Please enter a number. 61714 Please enter an integer between %1 and %2. 61715 Please enter a number between %1 and %2. 61716 Please enter no more than %1 characters. 61717 Please select a button. 61718 Please enter an integer between 0 and 255. 61719 Please enter a positive integer. 61720 Please enter a date and/or time. 61721 Please enter a currency. 61728 Unexpected file format. 61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given. 61730 Destination disk drive is full. 61731 Unable to read from %1, it is opened by someone else. 61732 Unable to write to %1, it is read-only or opened by someone else. 61733 An unexpected error occurred while reading %1. 61734 An unexpected error occurred while writing %1. 61829 %1\nUnable to register document.\nThe document may already be open. 61836 Unable to read write-only property. 61837 Unable to write read-only property. 61840 Unable to load mail system support. 61841 Mail system DLL is invalid. 61842 Send Mail failed to send message. 61856 No error occurred. 61857 An unknown error occurred while accessing %1. 61858 %1 was not found. 61859 %1 contains an invalid path. 61860 %1 could not be opened because there are too many open files. 61861 Access to %1 was denied. 61862 An invalid file handle was associated with %1. 61863 %1 could not be removed because it is the current directory. 61864 %1 could not be created because the directory is full. 61865 Seek failed on %1 61866 A hardware I/O error was reported while accessing %1. 61867 A sharing violation occurred while accessing %1. 61868 A locking violation occurred while accessing %1. 61869 Disk full while accessing %1. 61870 An attempt was made to access %1 past its end. 61872 No error occurred. 61873 An unknown error occurred while accessing %1. 61874 An attempt was made to write to the reading %1. 61875 An attempt was made to access %1 past its end. 61876 An attempt was made to read from the writing %1. 61877 %1 has a bad format. 61878 %1 contained an unexpected object. 61879 %1 contains an incorrect schema. 61888 pixels 62000 This is a dummy message used as an anchor for the error messages 62001 Insufficient memory available to perform requested operation. 62002 Invalid server/host name. 62003 The named server/host has already been added to the list of DHCP servers. 62004 The given functionality is not currently supported. 62005 The scope specified is already being accessed 62006 The identifier of an option type cannot be changed. 62007 The given option identifier is already in use. 62008 Starting address is invalid for this range 62009 Ending address is invalid for this range. 62010 Internal error in updating the dialog 62011 The IP address range overlaps a current defined range. 62012 The IP address range is not a subset of the overall range. 62013 The IP address range given is invalid. 62014 Nothing has changed on the dialog. 62015 Dialog information was changed. Do you want to keep the changes? 62016 No primary server/host has been selected. 62017 An internal application error has occured. 62018 Option value data structure is invalid 62019 The name of the scope must be specified. 62020 A comment must be provided for the scope. 62021 The option name is required. 62022 Binary data editing not yet supported 62023 Array editing is not yet supported 62024 Numeric data is invalid. 62025 The subnet mask is not valid. 62026 The option was not found for deletion. 62027 System error %ld occurred 62028 The date given is invalid. 62029 Unique Client Identifier string is invalid. 62030 The client name is invalid. 62031 The client IP address is invalid. 62032 The client IP address of an existing client cannot be changed. 63000 This is a dummy entry corresponding to the first DHCPDLL.DLL error message 63001 Unable to connect to the host/server name given 63002 There is no current connection to the host/server 63003 The given IP address is invalid 63004 Information for this host is unavailable 63005 This scope has an internal data conflict error. 63007 NetBIOS Names are not valid here. Try using a DNS name or IP address. 63008 Are you sure you want to delete the scope? 63009 \nUnable to connect to DHCP server at %s.\nServer may be down, or DHCP service not started.\n\nDo you want to remove it from the list of DHCP servers? 63010 Are you sure you want to remove %s from the list of DHCP servers? 63011 The scope has already been deleted by another process. 63012 Warning: In order for WINS to function properly, you must now set option 46(WINS/NBT Node Type), and set it to either 0x02(P-Node), 0x04(M-Node) or 0x08(H-Node). 63013 The DHCP server service is not running on the target machine. 63014 Value out of range. 63015 You must specify a lease duration 63016 The IP range has been changed, but not yet saved. Continuing will discard the changes. Proceed? 63017 The option ID must be between 0 and 255. 63018 This scope may have active clients. Delete scope anyway? 63019 Unable to determine number of available leases. 63020 This scope is currently active. Are you sure you want to delete the scope? 63021 Are you sure you want to delete the lease? 63022 This function is not supported on the DHCP server you are administering. You must upgrade this DHCP server's software to complete this function. 64000 Decimal 64001 Hex 64002 String 64003 IP Address 64004 Boolean 64005 FALSE 64006 TRUE 64007 ** invalid ** 64008 Global Option Settings 64009 %s to %s 64010 <INV> 64011 Address %s 64012 %03.3d -- %s 64013 DHCP Options: Global 64014 DHCP Options: Scope 64015 DHCP Options: Reservation 64016 Scope Properties 64017 Create Scope 64018 Byte 64019 Word 64020 Long 64021 Long Integer 64022 IP Address 64023 String 64024 Binary 64025 Encapsulated 64026 Change Option Type 64027 Add Option Type 64028 [%s] %s 64029 Server %s 64030 Scope 64031 Global 64032 DHCP Standard Options 64034 S 64035 G 64036 00112233445566778899aAbBcCdDeEfF 64037 Default Option Settings 64038 (Option %ld) 64040 Never 64041 January,February,March,April,May,June,July,August,September,October,November,December 64042 Add Reserved Clients 64043 Client Properties 64044 64045 Reservation 64046 &Close 64047 Reservation 64048 Obtaining client information from DHCP server 64049 Performing Client Lease Review 64050 Getting scope definitions on selected host 64051 &Activate 64052 De&activate 64053 Reservation in use 64054 Infinite 64055 Not Active 64056 Getting option definitions 64057 The scope has been successfully created, but has not yet been activated.\n\nActivate the new scope now? 64058 &Add 64059 Cancel 64060 Close 64061 OK 64062 Getting lease information for this scope 64063 Adding client to the current scope 64064 Updating client information 64065 Storing default option values 64066 Creating scope 64067 %s (%d%%) 64068 (Local) 64069 *Local Machine* 64070 Checking for inconsistencies in the database 64071 Adding missing database entries 64072 The database is consistent. 64073 <None> 64074 Please enter a valid integer from %d to %u 64075 Connecting to DHCP server... 64076 N/A 64077 The Unique Identifier you have entered may not be correct. Do you want to use this Identifier anyway? 64078 Getting superscope definitions on selected host 64079 Updating superscope definitions on selected host 64080 Getting properties for selected DHCP server 64081 Updating properties for selected DHCP server 65000 This is the last possible message number +1