1 Windows Sound System Driver Alert 3 Interrupt %d was already used, and has been changed to %d. 4 There are no available interrupts. The sound card will not work. 5 The board is not at IO port %X, but was found at %X. 6 The Windows Sound System board is not detected in your machine. 7 Both DMA channels must be the same. Setting both channels to %d. 8 DMA channel %d is not valid. Selecting channel %d. 11 The Windows Sound System driver cannot located any synthesizer patches. MIDI will not work until you re-run setup. 21 The Windows Sound System board is not responding properly. Please run setup. 22 An unexpected error has occurred 23 There are no available DMA channels. The sound card will not work. 24 The Windows Sound System Driver cannot be removed because of a registry access problem. 29 DMA buffer size must be between 4 and 64. 32 About... 101 Crystal Audio System Playback 102 Crystal Audio System Record 103 Crystal Audio System MIDI Out 104 Crystal Audio System Line In 105 Crystal Audio System MIDI In 106 Crystal Audio System MIX Out 107 Crystal Audio System CD 108 Crystal Audio System PCSpeaker 109 Crystal Audio System Monitor 110 Vol 111 Master Out 112 Rec 113 Wave Input 114 Voice 115 Voice Commands 120 Line 121 Line 122 Wave 123 Wave 124 Synth 125 Synth 126 Mic 127 Mic 130 LineOutVol 131 LineOutVol 132 Master Mute 133 Master Mute 134 WaveInMux 135 Wave Input Mux 136 VoiceInMux 137 Voice Input Mux 138 LineInVol 139 Line Input Volume 140 LineMute 141 Master Mute 142 WaveOutVol 143 Volume for Wave Out 144 MuteWave 145 Wave Output Wave Mute 146 PeakMeter 147 Wave Output Meter 148 MidiOutVol 149 Volume Control for MIDI Out 150 SynthMute 151 FM Synthesis Mute 152 LineInVol 153 Line-In Input Level 154 WaveInMeter 155 Line-In Input Meter 156 MicVol 157 Volume for Microphone 158 MicMeter 159 Microphone Input Meter 160 WaveInVol 162 WaveInMeter 164 MicVol 165 Microphone Input Level 166 MicMeter 167 Microphone Input Meter 180 Crystal Audio System Mixer 190 Synth 191 MixOut 192 Synth 193 MixOut 194 CD 195 PCSpeaker 196 Monitor 197 CD 198 PCSpeaker 199 Monitor 210 SynthInVol 211 SynthInMeter 212 MixOutVol 213 MixOutMeter 220 MIDI-In Input Level 221 MIDI-In Input Meter 222 Volume for MixOut 223 MixOut Input Meter 230 SynthInVol 231 SynthInMeter 232 MixOutVol 233 MixOutMeter 234 Line-In Input Level 235 Line-In Input Meter 236 Volume for MixOut 237 MixOut Input Meter 240 Aux2Vol 241 Aux2Mute 242 MonoVol 243 MonoMute 244 MonitorVol 245 MonitorMute 250 CD Aux2 Volume 251 CD Aux2 Mute 252 PCSpeaker Mono Volume 253 PCSpeaker Mono Mute 254 Monitor Volume 255 Monitor Mute 500 CS423X Plug and Play Configuration 1001 The Crystal Audio Driver is not compatible\nwith your Micro Channel Architecture (MCA). 1002 The sound card cannot be found with this port number or there is an interrupt conflict. Check your hardware settings, and try again. 1003 The sound card does not respond using this interrupt number. Check your hardware settings, and try again. 1004 The interrupt chosen is in use by another part of the system. Change your card to use a different interrupt and try again. 1005 The file CSINST.EXE cannot be found. Please find the file, put it in your system32 directory and reinstall. 1006 Be sure the Crystal Mixer Panel and Crystal Input Panel applications are closed before attempting to reconfigure the driver. 1007 Crystal Semiconductor 1008 A configuration or hardware problem has occurred.\nCheck your hardware and system settings and try again. 1009 The Crystal Audio driver cannot be removed because of a registry access problem. 1010 You have insufficient privilege to install, remove or configure the Crystal Semiconductor audio driver