100 Sound Blaster Line-In 101 Sound Blaster CD-Audio 102 Sound Blaster FM Synthesis 103 Sound Blaster Record 104 Sound Blaster Playback 105 Sound Blaster Mixer 106 Auto Gain Control 107 AGC 108 Recording Input Meter 109 Record Meter 110 Line-In Mute 111 Line Mute 112 CD Audio Mute 113 CD Mute 114 Master Mute 115 Master Mute 116 Mic Mute 117 Microphone Mute 118 FM Synthesis Mute 119 Synth Mute 120 Wave Output Mute 121 Wave Mute 122 Master Output Sources 123 Output Sources 124 Recording Input Source 125 Record Source 126 Line-In Input Meter 127 Line Meter 128 Microphone Input Meter 129 Mic Meter 130 Line-In Input Meter 131 Line Meter 132 CD Audio Input Meter 133 CD Meter 134 Microphone Input Meter 135 Mic Meter 136 Wave Output Meter 137 Wave Meter 138 Voice Input Source 139 Voice Source 140 Master Bass Level 141 Bass 142 Line-In Volume Level 143 Line Volume 144 CD Audio Volume Level 145 CD Volume 146 Microphone Volume Level 147 Mic Volume 148 FM Synthesis Volume Level 149 Synth Volume 150 Wave Output Volume Level 151 Wave Volume 152 Master Volume Level 153 Master Volume 154 Recording Input Gain 155 Record Gain 156 Master Treble Level 157 Treble 158 Line-In Input Level 159 Line Input 160 Microphone Input Level 161 Mic Input 162 Line-In Input Level 163 Line Input 164 CD Audio Input Level 165 CD Input 166 Microphone Input Level 167 Mic Input 168 FM Synthesis Input Level 169 Synth Input 170 Volume Control 171 Vol 172 Voice Commands 173 Voice 174 Recording Control 175 Rec 176 Line-In 177 Line 178 CD Audio 179 CD 180 Microphone 181 Mic 182 Synthesizer 183 Synth 184 Wave Output 185 Wave 186 Recording Input Sources 187 Record Sources 188 Gain 189 Output Gain Control 301 The sound card cannot be found with this DMA Channel. Check your settings and try again. 302 The sound card cannot be found with this Interrupt. Check your settings and try again. 303 The sound card cannot be found with this port number. Check your settings and try again. 304 The MPU401 hardware cannot be found with this port. Check your settings and try again. 305 The DMA channel is in use by another part of the system. 306 Unexpeced error occurred during installation. Check your settings and try again. 307 The Interrupt is in use by another part of the system. 308 The MPU401 port address is in use by another part of the system. 310 The port is in use by another part of the system. 311 There was insufficient memory to install the driver. 312 The Sound Blaster 1.X driver is installed for use with your Thunder Card. For your card to work correctly with Windows, you should contact Media Vision for a driver specific to your card. 401 No suitable port is available for the Sound Blaster Card. 402 No suitable interrupt is available for the Sound Blaster Card. 403 No suitable DMA Channels is available for the Sound Blaster Card. 410 The Sound Blaster driver cannot be removed because of a registry access problem. 411 You have insufficient privilege to install, remove or configure the Sound Blaster driver 412 The Sound Blaster driver is busy. Try closing down volume controls and retrying. If this doesn't work remove the Sound Blaster driver, reboot and re-install it. 413 An unexpected error has occurred. Please try again. 414 DMA buffer size must be between 4 and %d. 415 A DMA Buffer of size %d Kilobytes could not be obtained, using %d Kilobytes instead. 500 Disable 501 I/O Address: 502 I/O &Address: 503 Continue 504 OK 505 Help for Continue 2131 Pressing the Continue button will test the port address and attempt to detect which Sound Blaster model is installed. 2132 Pressing the Cancel button exits the configuration dialog and restores your configuration to its original state if possible. 2151 Pressing the OK button tests the configuration. If the Configuration is OK any changes that you made are saved. You will have to restart Windows for your changes to take full effect. 2152 Pressing the Cancel button exits the configuration dialog and restores your configuration to its original state if possible. 2171 Pressing the OK button tests the configuration. If the Configuration is OK any changes that you made are saved. You will have to restart Windows for your changes to take full effect. 2172 Pressing the Cancel button exits the configuration dialog and restores your configuration to its original state if possible. 2191 Pressing the OK button tests the configuration. If the Configuration is OK any changes that you made are saved. You will have to restart Windows for your changes to take full effect. 2192 Pressing the Cancel button exits the configuration dialog and restores your configuration to its original state if possible. 3001 Help for OK 3002 Help for Cancel 4130 Sound Blaster Base I/O Address 4150 Sound Blaster 1.X and 2.0 Configuration 4170 Sound Blaster Pro Configuration 4190 Sound Blaster 16 Configuration 8141 This setting tells the system the port address at which your Sound Blaster card is located. 8150 This setting tells the system the interrupt that your Sound Blaster card is using. 8161 This setting tells the system the port address at which your Sound Blaster card is located. 8170 This setting tells the system the interrupt that your Sound Blaster Pro card is using. 8172 This setting tells the system the DMA channel your Sound Blaster Pro card is using. 8180 Pressing the Advanced button allows you to configure the DMA buffer size in Kilobytes. The default value of 4 Kilobytes is suitable for most purposes. 8181 This setting tells the system the port address at which your Sound Blaster Pro card is located. 8190 This setting sets the interrupt to use for your Sound Blaster 16 card. 8192 This setting sets the DMA channel your Sound Blaster 16 card will use for 8-bit digitized sound. 8194 This setting sets the DMA channel your Sound Blaster 16 card will use for 16-bit digitized sound. 8196 This setting tells the system the port address at which the MPU401 feature of your Sound Blaster 16 card is located. 8200 Pressing the Advanced button allows you to configure the DMA buffer size in KiloBytes. The default value of 16 Kilobytes is suitable for most purposes. 8201 This setting tells the system the port address at which your Sound Blaster 16 card is located. 9000 Help for Interrupt 9002 Help for DMA Channel 9004 Help for DMA Channel (16-bit) 9006 Help for MPU401 I/O Address 9010 Help for Advanced 9011 Help for I/O Address