********** PLEASE read BOTH sections (They are short!)
*********** on this page before proceeding:

---------------------------------------------------------
SECTION I

	IF you run QWicKeSST and you recieve an "Incompatible
Database" error, please do the following.  Manually move
MSABC200.DLL, MSAJT112.DLL, MSAJT200.DLL, VBDB300.DLL
from the ZIP archive, and place them in your Windows/system
dirctory.  You should overwrite any copies that you may already 
have.  If this still does not work, search your system for duplicates,
and erase the ones not in the system dir.  Further assistance, Email 
P_B_E@Delphi.Com.

---------------------------------------------------------
SECTION II

	Please note to run QWicKeSST you need either SHARE.EXE loaded, or VSHARE.386. 
VSHARE is the preferred method, and the install will put a copy of it in 
WINDOWS\SYSTEM for you.  If it is not already installed, you must do the following:
Edit SYSTEM.INI which is in your WINDOWS directory.  To the [386Enh] section, add the
following line:

device=vshare.386

	Now restart windows.  If you already have SHARE.EXE loaded (Which will
not allow VSHARE to load) and you cannot use VSHARE (ie Some LANs, etc) please
make sure you have enough locks.  The entry in your AUTOEXEC.BAT should appear as
follows:

add <PATH>SHARE.EXE /L:500