---------------------------------------------------------------------------
        deltaComm Development, Inc., PO Box 1185, Cary, NC  27512  USA

         (919)-460-4556 voice, (919)-460-4531 FAX, (919)-481-9399 BBS

          Telix Copyright (C) 1986-1994 by deltaComm Development, Inc.
  ---------------------------------------------------------------------------

 February 17th, 1995 --

       In line with deltaComm policy, minor updates, such as those from Telix
       for Windows 1.00a to Telix for Windows 1.01d, are free. This patch file
       has been released to take your registered copy of Telix for Windows and
       convert it to a registered v1.01d.

       Version 1.00a (size: 1,744,896) was released on August 1st, 1994.
       Version 1.00b (size: 1,740,032) was released on September 14th, 1994.
       Version 1.01a (size: 1,733,888) was released on October 14th, 1994.
       Version 1.01b (size:   821,248) was released on December 7th, 1994.
       Version 1.01c (size:   773,632) was released on February 1st, 1995.
       Version 1.01d (size:   773,632) is dated February 17th, 1995.

       To apply this patch, please follow the directions below precisely:

         1) Place the files PATCH.EXE and PATCH.RTP in the same directory that
            you keep TELIX.EXE and APROW.DLL in.  Exit Windows.  This patch
            program MUST be run when Windows is not loaded.

         2) Run the PATCH.EXE program. Your screen will look somewhat like the
            following, but may differ depending on the revision of Telix you
            are patching (the patch program may patch more files than are
            shown in this example) :

ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
           PATCH  Version 2.01 - .RTPatch(R) Software Update System
       (C) Copyright Pocket Soft, Inc., 1991-1994.  All Rights Reserved.
                     < Pocket Soft, Inc.  (713) 460-5600 >
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ


ÄÄÄÄÄ Processing Patch File ÄÄÄÄÄ

Applying UPDATE File Patch for 'TELIX.EXE'

    Updating ...
    File successfully Updated!
    Deleting Old File

Applying UPDATE File Patch for 'APROWP.DLL'

    Updating ...
    File successfully Updated!
    Deleting Old File



ÄÄÄÄÄ Patch File Processing Complete ÄÄÄÄÄ

ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

         3) The resultant copy of TELIX.EXE will be the latest release, and
            may be immediately used.


         4) Some sections of Telix for Windows may have had user modifications
            made to them, notably the Host Mode and the Keyboard Definition
            files.  Because we did not want to overwrite any modifications
            you might have made, the patch program will NOT automatically
            update these files, though they HAVE been corrected in some cases.

            A complete set of *.KBD keyboard macros and terminal emulation
            keyboard sequences can be found in the included file KBDFILES.ZIP.

            A newer, updated host mode that more closely resembles the
            documentation may be found in the included file WINHOST.ZIP.

            The latest copy of TELIX.MDM has been included outside the patch.

------------------------------------------------------------------------------

          Q: I get the following error message when applying the patch:

             error ept0036: Original file not found. However, a file of the
                            same name was found. No update done since file
                            checksums do not match.

          A: PATCH was unable to locate an exact match for the original file
             to be updated. If you think you may be patching the wrong file,
             or if you are certain that you are patching the right file,
             please contact Technical Support at (919) 460-4556 if this
             message persists.

             This message may also be caused by another situation: A TSR could
             be interfering with your system and its ability to read the
             original file from disk.

             Programs known to cause PATCH.EXE to generate this error are
             Stacker and DoubleSpace, some disk caches, some CD-ROM drivers,
             and some anti-viral software. Anything loaded in your CONFIG.SYS
             and AUTOEXEC.BAT can potentially cause this error. Each can cause
             the checksum of the file you have to differ from the checksum of
             the file we used to build the patch.

             Please try to remove these items from memory if PATCH gives you
             this error, and then start over at step 2.  The best way to do
             this is to boot from a bootable floppy drive that has NO
             CONFIG.SYS or AUTOEXEC.BAT.

             If all the above steps fail, please upload your TELIX.EXE file
             to deltaComm Online at 919-481-9399 and we will look into the
             possibility of adding support to the patch for your revision.

------------------------------------------------------------------------------