NOVELL TECHNICAL INFORMATION DOCUMENT TITLE: DOS Client Files Update DOCUMENT ID: TID014295 DOCUMENT REVISION: B DATE: 21JAN94 ALERT STATUS: Yellow INFORMATION TYPE: Symptom Solution README FOR: DOSUP9.EXE NOVELL PRODUCT and VERSION: NetWare Client for DOS/Windows ABSTRACT: Contains updated DOS client files. This file includes the v1.10 NetWare DOS Requester (VLMs) and PBURST.NLM. It also includes NetWare shells v3.32 (NETX.EXE, EMSNETX.EXE, XMSNETX.EXE), compatible with DOS 3.0 and above, including MS DOS 6.2, PCDOS 6.1, DR DOS 6.0 and Windows 3.0/3.1. Includes support for both ODI and dedicated IPX, Netbios, DOS client files, and MLID drivers. NOTE: If you are using packet burst over a wide area link, download PBURST.EXE from Novlib, lib5 for packet burst over a WAN link. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 DISCLAIMER THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 SYMPTOM Fixes known anomalies with the LSL, IPXODI, and MLID drivers. SOLUTION Copy the updated files to the appropriate directories, and reboot the w/s. Files marked with an '*' are new since DOSUP8.EXE. Files marked with a '^' have been updated since DOSUP8.EXE. NOTE: When you expand DOSUP9.EXE, it will automatically create two sub-directories: NETX (containing the latest workstation shells that support DOS 3.x to DOS 6.x, including MSDOS 6.2 and PCDOS 6.1); VLMS (containing the latest released NetWare DOS Requester files v1.10). Self-Extracting File Name: DOSUP9.EXE Revision: B Files Included Size Date Time \ DOSUP9.TXT (This File) IPX.OBJ 20340 11-21-91 12:50p LSL.COM 17805 09-10-93 3:48p NE2.COM 20192 12-09-93 10:12p ^ DOSNP.EXE 10547 07-19-93 3:17p INT2F.COM 640 07-28-88 11:48a PCN2L.COM 21294 04-28-93 1:12p ROUTE.COM 4882 05-11-93 8:59a TBMI2.COM 24884 06-03-93 4:36p TOKEN.COM 27381 04-12-93 6:27p IPXODI.COM 30247 10-07-93 4:52p LANSUP.COM 21943 02-02-93 11:54a NE2_32.COM 19903 07-30-93 9:39a NE1000.COM 19807 07-30-93 9:40a NE2000.COM 21188 11-23-93 11:31a ^ NE2100.COM 29256 07-30-93 9:41a NE3200.COM 26568 10-20-93 11:28a ^ PACKET.SIG 3720 01-20-94 10:31a * PBURST.NLM 95736 11-12-92 10:34a * RPLFIX.COM 1838 06-30-93 10:56p ^ RPLFIX.DOC 2255 02-21-91 2:47p RPLODI.COM 1652 03-21-91 2:24p TASKID.COM 7539 01-22-93 10:47a TOKODI.DOC 6882 11-03-93 2:08a TRXNET.COM 18765 12-21-92 2:27p NE1500T.COM 29258 07-30-93 9:41a NETBIOS.EXE 24402 11-19-93 11:05a ^ NTR2000.COM 24909 03-31-93 9:46a ODIINFO.DOC 24499 12-09-92 2:43p ODINSUP.COM 33867 02-23-93 8:58a ODINSUP.DOC 42016 10-28-93 1:07a DEADLOCK.TXT 18073 12-21-93 2:26p ^ DOSODIWS.DOC 4916 11-03-93 2:19a \NETX\ NETX.EXE 78654 11-17-93 2:14p ^ EMSNETX.EXE 90510 11-17-93 2:16p ^ XMSNETX.EXE 87172 11-17-93 2:18p ^ \VLMS\ FIO.VLM 17914 12-09-93 1:06p * NDS.VLM 8340 12-09-93 1:05p * NWP.VLM 6500 12-09-93 1:05p * RSA.VLM 19552 12-09-93 1:07p * VLM.EXE 36525 12-09-93 1:03p * AUTO.VLM 4447 12-09-93 1:06p * BIND.VLM 4664 12-09-93 1:05p * CONN.VLM 10705 12-09-93 1:04p * NETX.VLM 15622 12-09-93 1:06p * TRAN.VLM 1545 12-09-93 1:04p * PRINT.VLM 7893 12-09-93 1:06p * REDIR.VLM 13633 12-09-93 1:06p * IPXNCP.VLM 9560 12-09-93 1:04p * IPXODI.MSG 3829 10-07-93 4:52p * GENERAL.VLM 4203 12-09-93 1:06p * READVLM.TXT 42144 12-20-93 11:43a * UNI_COL.001 4500 01-23-93 2:24p * UNI_MON.001 4244 01-23-93 2:23p * 1252_UNI.001 659 01-26-93 5:10p * DOSRQSTR.MSG 9522 11-19-93 8:56a * SECURITY.VLM 7978 12-09-93 1:05p * UNI_1252.001 2196 01-26-93 5:10p * Installation Instructions: Make a backup of any files currently on your workstation that appear in the list above. FOR THE FILES AT THE ROOT OF THE [DOSUP9] FILE: Note: The files at the root of [DOSUP9] are not shell specific, and are for use with either NETX or VLM workstation configurations. Copy the updated LSL, MLID driver, IPXODI and any other needed driver to the workstation's boot drive, where the network files are located. Reboot, and load the newer drivers. FOR THE FILES IN THE SUB-DIRECTORY [NETX] UNDER THE [DOSUP9] ROOT DIRECTORY: These are the latest NetWare shells that support DOS 3.x - DOS 6.x. If you are using PCDOS v6.10, please see the note for PCDOS 6.10 users on the next page of this document. Copy the updated shells (NETX.EXE, EMSNETX.EXE and/or XMSNETX.EXE) to the workstation's boot drive, where the network files are located. Reboot, and load the newer shell. FOR THE FILES IN THE SUB-DIRECTORY [VLMS] UNDER THE [DOSUP9] ROOT DIRECTORY: If you are using the VLMs (NetWare DOS Requester), add LASTDRIVE=Z to the workstation CONFIG.SYS file. Please read the READVLM.TXT file for the latest information about the VLMs. Copy the following files to the workstation boot drive's NWCLIENT directory: AUTO.VLM BIND.VLM CONN.VLM FIO.VLM GENERAL.VLM IPXNCP.VLM NDS.VLM NETX.VLM NWP.VLM PRINT.VLM REDIR.VLM RSA.VLM SECURITY.VLM TRAN.VLM VLM.EXE Copy the following files to the boot drive's NWCLIENT\NLS directory: 1252_UNI.001 UNI_1252.001 UNI_COL.001 UNI_MON.001 Copy the following files to the boot drive's NWCLIENT\NLS\ENGLISH directory: DOSRQSTR.MSG IPXODI.MSG IMPORTANT INFORMATION: The following drivers included in this ZIP file now default to the 802.2 frame type. When using these drivers, it is necessary to either use the 802.2 frame type on your server or change the frame type for the workstation in your workstation NET.CFG file. NE1000.COM 19,807 7-30-93 9:40a v1.28 NE1500T.COM 29,258 7-30-93 9:41a v1.27 NE2.COM 20192 12-09-93 10:12p v1.28 NE2000.COM 21188 11-23-93 11:31a v1.54 NE2100.COM 29,256 7-30-93 9:41a v1.27 NE2_32.COM 19,903 7-30-93 9:39a v1.30 NE3200.COM 26,568 10-20-93 11:28a v1.18 If you wish to continue to use the 802.3 frame type, place the following two lines in the NET.CFG file: Link Driver Frame Ethernet_802.3 If you were using the NE2000.COM driver, you would replace with NE2000. Be sure to indent the second line and place a carriage return after the second line. IMPORTANT Note for PC DOS 6.10 users: (Problem using the %OS_VERSION parameter) The default login script, as well as many system login script files contain the following commands: MAP INS S1:=SYS:PUBLIC MAP INS S2:=SYS:PUBLIC/%MACHINE/%OS/%OS_VERSION The %MACHINE variable applies to the LONG MACHINE TYPE= parameter in the NET.CFG file. It defaults to IBM_PC The %OS variable applies to the DOS NAME= parameter in the NET.CFG file. It defaults to MSDOS. PCDOS users typically will create a directory called PCDOS, and set DOS NAME=PCDOS in the workstation NET.CFG file. This allows the co-existence of MSDOS and PCDOS with the same version number to be mapped under the %OS directory. i.e. SYS:PUBLIC\IBM_PC\MSDOS\V6.00 SYS:PUBLIC\IBM_PC\PCDOS\V6.00 The %OS_VERSION variable applies to the DOS VERSION returned from DOS INT 21h-Function 30h, which is the "GET DOS VERSION" function. We check the AL register for the major version number, and the AH register for the minor version number. Using INT 21h, Function 30h for PCDOS v6.00, will return 6.00 as the version. This matches the DOS VER command from PCDOS v6.00, which also returns version 6.00. However, using INT 21h, Function 30h for PCDOS v6.10, will also return 6.00 as the version. This does not match the VER command from PCDOS v6.10, which shows the version as 6.10. This is similar to what happens with DOS 4.01. The DOS VER command (which returns an ASCII text string) reports the DOS version as version 4.01, but internally (using the Get Dos Version function call), DOS 4.01 reports itself as DOS version 4.00 to applications. This means that PCDOS v6.10 users will be mapped to the: SYS:PUBLIC\IBM_PC\PCDOS\V6.00 directory by default, since INT 21h-Function 30h returns 6.00 as the version, and the NETX.EXE shell relies on this function to return the correct DOS version. This will result in invalid command.com errors, if comspec is set to the network "DOS directory" search mapping. WORK AROUND OPTIONS 1) Add the following line to the workstation's config.sys file: DEVICE=SETVER.EXE At the DOS prompt, type: SETVER NETX.EXE 6.10 (to add netx.exe to the setver table.) At the DOS prompt, type: SETVER (to list the elements in the setver table, to make sure NETX.EXE was correctly added to the table.) NOTE: NETX.EXE can be removed from the setver table using the following syntax: SETVER NETX.EXE /D Only do this if setver is no longer needed to report the correct DOS version to the NETX.EXE shell. Reboot the workstation, and load the network software. OR, (instead of option 1) 2) Upgrade all workstations from PCDOS v6.00 to PCDOS v6.10, and place the PCDOS v6.10 files into the: SYS:PUBLIC\IBM_PC\PCDOS\V6.00 directory. This will allow the default mapping of SYS:PUBLIC\IBM_PC\PCDOS\V6.00 to work for v6.10 PCDOS users. Patch History: HISTORY OF FIXES for the current NetWare Shells (NETX.EXE, EMSNETX.EXE & XMSNETX.EXE) since v3.32 (930217) SYMPTOM 1) Provides support for DOS 6.x, rather than just 6.0 and below. Added support for versions 6.x of DOS. (See the note at the bottom of this document.) 2) Adds support for the NCP return code 150. Now when the shell receives a 150 return code from Int 21 function 50h, it will put a 24h in the AX register, indicating a "sharing buffer overflow" error. 3) BACKUP from DOS 5.0 fails when specifying a NetWare drive as the target drive. Int 21 function 60 was failing (file not found) when parsing root directory names, such as "f:\". 4) Unable to set PRINT TAIL value in NET.CFG to 0. This has been fixed in this release. 5) The destination file's date changes with the NCOPY /C option. A bug in the cache code could cause NCOPY /C to update the destination file with the current date and time. Specifically, using NCOPY /C to copy a 30911 byte file would cause the bug. Some other sizes would not fail. 6) Interrupt 21h function 40h errors were not being passed on to the application. The shell was clearing the carry flag on write errors, causing an application to believe that no write error had occurred. 7) Interrupt 21h function 4B01h (load but do not execute) was causing the workstation to hang. 8) The stack size was increased in order to accommodate the "PRINT TAIL" parameter in NET.CFG 9) Interrupt 21h function 4409h, which determines whether the specified device is local or remote, was returning incorrect values when run on a network drive. 10) The shell was returning an incorrect print job number. 11) If a section of a file is locked with int 21h - 5Ch, and then another workstation accesses the same file and tries to read the locked area with int 21h - 3Fh, it will return successful. Solution Specifics: Brief Description of the files included in the kit: DOSNP.EXE: NetWare DOS NP Extender EMSNETX.EXE: NetWare EMS Workstation Shell INT2F.COM: Novell Network BIOS Interrupt 2Fh Emulator IPX.OBJ: Novell IPX/SPX (No further development is being done on IPX.OBJ. Novell recommends you use the ODI client software. See ODIINFO.DOC for details.) IPXODI.COM: NetWare IPX/SPX Protocol LANSUP.COM: IBM LAN Support MLID LSL.COM: NetWare Link Support Layer NE1000.COM: Novell NE1000 Ethernet MLID NE1500T.COM: Novell NE1500T Ethernet MLID NE2.COM: Novell NE2 Ethernet MLID NE2_32.COM: Novell NE2-32 Ethernet MLID NE2000.COM: Novell NE2000 Ethernet MLID NE2100.COM: Novell NE2100 Ethernet MLID NE3200.COM: Novell NE3200 Ethernet MLID NETBIOS.EXE: Novell NetBIOS Emulation Package NTR2000.COM: Novell NTR2000 Token-ring MLID ODINSUP.COM: ODI Support Interface for NDIS PBURST.NLM: NCP Packet Burst Support, Large Internet Packets, and Packet Signature for NetWare 3.11 PCN2L.COM: IBM PC Network II & II/A MLID ROUTE.COM: NetWare Source Routing Driver RPLFIX.COM: NetWare Boot Disk Image Patch Program RPLODI.COM: Novell RPL ODI TASKID.COM: Version Task Identification Program TBMI2.COM: Task Switched Buffer Manager for IPX/SPX TOKEN.COM: IBM Token-Ring MLID TRXNET.COM: Novell Turbo RxNet & RxNet/2 MLID XMSNETX.EXE: NetWare XMS Workstation Shell VLMs AUTO.VLM: NetWare auto-reconnect module BIND.VLM: NetWare bindery protocol module CONN.VLM: NetWare connection table manager DOSRQSTR.MSG: NetWare DOS Requester message file (english) FIO.VLM: NetWare file input-output module GENERAL.VLM: NetWare general purpose function module IPXNCP.VLM: NetWare IPX transport module IPXODI.MSG: NetWare IPXODI Message file (english) NDS.VLM: NetWare directory services protocol module NETX.VLM: NetWare workstation shell module NWP.VLM: NetWare protocol multiplexor module PRINT.VLM: NetWare printer redirection module REDIR.VLM: NetWare DOS redirector module RSA.VLM: NetWare RSA authentication module SECURITY.VLM: NetWare security enhancement module TRAN.VLM: NetWare transport multiplexor module VLM.EXE: NetWare virtual loadable module manager 1252_UNI.001: Unicode file for US code page 437 UNI_1252.001: Unicode file for US code page 437 UNI_COL.001: Unicode file for US code page 437 UNI_MON.001: Unicode file for US code page 437 Brief Description of the document files included in the kit: DEADLOCK.TXT: Black Screen of Death/Windows Hang suggestions, Also includes LSL, IPXODI and VIPX parameters and changes. DOSODIWS.DOC: Brief description of ODI, Token and Lansup drivers DOSUP9.TXT: This File This README file accompanies DOSUP9.EXE which comprises DOS client files for NetWare v4.x, v3.x, v2.2x and v2.1x operating systems. ODIINFO.DOC: Discussion on why Novell is promoting ODI ODINSUP.DOC: Info and configuration examples for ODINSUP PACKET.SIG: Info on Packet Signature and parameters READVLM.TXT: VLM errata and information sheet. RPLFIX.DOC: Information on how and when to run RPLFIX TOKODI.DOC: Token and Lansup LSB mode, Bit reversal, etc PACKET BURST: BNETX.EXE has been deleted from the client update due to a rare problem which can result in data corruption. For Packet Burst support at the client, the workstation will need to be upgraded to the NetWare DOS Requester (VLM) technology. v1.10 VLMs have Packet Burst and Large Internet Packets enabled by default. For v3.12 and v4.x NetWare, Packet Burst and Large Internet Packets are enabled by default in the O/S, and do not require or use PBURST.NLM. v3.11 servers need PBURST.NLM loaded to support Packet Burst and LIP NCP calls. To turn Large Internet Packets off at a 3.11 server with PBURST.NLM loaded, or at a 3.12 or 4.x server, at the server console type: Allow LIP=OFF If you are using PBURST over a WAN (Wide Area Link), download PBURST.EXE from Novlib lib5. November 1993 NetWare Application Notes has an article comparing packet burst under BNETX vs VLMs. December 1993 NetWare Application Notes has an article with a sample packet burst configuration for VSAT satellite links. TBMI2.COM - This file is for use with DOS v5.0 Task Swapper, Windows v3.0 or Windows v3.1 (running in standard or real mode). For Windows v3.0, use TBMI2.COM and TASKID.COM. In the workstation net.cfg add the following parameter: USING WINDOWS 3.0=ON TBMI2 is intended for those users running programs which use the IPX or SPX communications protocols from the DOS prompt in Windows (standard or real mode). TSRs running under DOS prompts in Windows Enhanced mode do not need TBMI2, since VIPX.386 will track IPX and SPX functions. If no DOS applications are being run which require IPX or SPX support, then neither of these programs are required. To determine whether your application requires TBMI2, follow these steps: o Load TBMI2.COM o Start Windows (In Standard or Real mode) o Open a MS-DOS prompt o (for Windows 3.0, load TASKID.COM) o Start the DOS application in question o Run the application and then exit. o Display diagnostic information by typing the following: TBMI2 /D o If the value in the field named Far Calls Processed is not 0, you need to run TBMI2.COM. To get help with TBMI2.COM, type the following: tbmi2 /? The default configuration for TBMI2.COM is correct for most applications. For use with the MS-DOS 5.0 task swapper, this file is documented in the MS-DOS v5.0 README.TXT. DOSNP.EXE - This is the Named Pipes Extender for DOS. It allows you to run Named Pipes applications under DOS. Novell Named Pipe Route Enhancements DOS Clients - The default has been changed to not maintain a local Named Pipe server router table. When a request for a DosOpen, DosWaitNmPipe, or DosCallNmPipe is received the protocol will query the network for the whereabouts of the Named Pipe server specified. This means NCP services must be available i.e. NETX.EXE or VLM's must be loaded before DOSNP.EXE The following parameters can be used in the Net.cfg to configure Dosnp.exe. NP Max Machine Names = n where n is a number between 4 and 50. Replace n with how many named pipe servers you want in the table. (This statement in the Net.cfg will make the client maintain a local Named Pipe server router table.) (Not to be used in conjunction with NP Max Sessions) Default is 10 NP Max Sessions = n where n is a number between 4 and 50. Replace n with the number of Named Pipe servers you want to communicate with at once from the remote router. (Not to be used in conjunction with NP Max Machine Names) Default is 10 NP Max Open Named Pipes = n where n is a number between 4 and 128. Replace n with the maximum number of named pipes that can be opened at once. Default is 4 RPLFIX.COM - RPLFIX is used to allow workstations to remote program load (RPL) properly with MS DOS 5.x and above. This utility must be run after the boot image file (usually NET$DOS.SYS) has been created using the DOSGEN utility. RPLFIX will directly modify the boot image file; the boot image file's size and last modified date will be different after RPLFIX has been run. RPLFIX only needs to be run against the boot image file once. Attempts to run RPLFIX against an already modified boot image file are detected by the utility, and no further modifications will be made to the boot image file. Follow the instructions for DOSGEN (setting up remote reset workstations) in the Novell reference manuals. For NetWare v2.x, this information can be found in Chapter 9 of the "Supervisor Guide", or Chapter 2 of the "Using the Network" manual. For NetWare v3.x, this information is found in Appendix D of the Installation manual. After performing all steps as outlined in the appropriate manual to create the boot image file, run RPLFIX.COM. The remote workstation will likely hang during the reset process if you are resetting using DOS 5.x or above and the boot image file has not been modified by RPLFIX. RPLFIX can be found on the WSGEN diskette, or in the WSGEN subdirectory if you are installing using a network drive. After you have located RPLFIX.COM, map a drive to the LOGIN subdirectory on the file server you wish to remote reset from. The DOSGEN procedure instructed you to create a boot image file in that subdirectory (usually named NET$DOS.SYS). If the drive you mapped to SYS:LOGIN was drive F, then you would enter the following: RPLFIX F:NET$DOS.SYS RPLFIX only needs to be run if the version of DOS loaded on the floppy disk used with DOSGEN is 5.x or greater. Earlier versions of DOS do not require that this utility be run. NOTE: If you renamed your boot image file, then you must use the new filename with RPLFIX: RPLFIX [d:] where [d:] is the drive letter where the image file is located, and is the name of the file created with the DOSGEN utility. RPLODI.COM How and When to Use RPLODI.COM When a user has the traditional Novell Remote Boot PROM that sends a Get-Nearest-Server packet to connect to the server, the workstation will hang after the MLID (such as \NE2000.COM) loads. Use RPLODI.COM only with Novell Remote Boot PROMS, and ensure it is loaded before the MLID. Use RPLODI.COM only with Novell Remote Boot PROMS. Do not use RPLODI.COM with IBM RPL PROMS. The RPLODI.COM intelligence was built-into the following files: TOKEN.RPL ETHER.RPL PCN2L.RPL F1ETH.RPL RBOOT.RPL For Novell Remote Boot PROMS, RPLODI.COM is implemented as shown in the following AUTOEXEC.BAT, and RPLODI.COM must load before NE2000.COM (the MLID driver): LSL RPLODI NE2000 IPXODI NETX �