You can use and distribute GutMOD, and ModSHELL as long as you do not make any modifications to the files that are included in this package and all the files listed here are included, and you do not receive an amount more than $5 distrubting it.... The Files are: File_id.diz Manaul.txt Gutmod.exe Modshell.exe Sod.exe These programs are supplied without any expressed or implied warranty. Use of the program indicates that you except all problems that arise from it's use. GutMOD 2.10 1994(C) - Gut Shoveler - Command line explanation: GUTMOD FILE 12000 This will play a mod named FILE.MOD using mixing rate 12000hz the default rate is 10k, and the minimum is 5k. I think that should be low enough for even slow 286 machines, However 12 or even 13k works good on my 386sx 25 GUTMOD FILE 12000 255 will play FILE.MOD using a mixing rate of 12000hz at full volume... BTW... IF You want to use the Pc speaker do add 'SPK' to the end of the whole thing.. GUTMOD FILE 12000 255 SPK like that... of course now in 2.10 of gutmod, volume can also be controlled in the program itself with the F keys F1-F4 raises the volume on the respective track, and shift F1-F4 lowers the volume. F5 and shift F5 controls all the tracks in a similar manner ModSHELL (C) Cerberus -/- Gut Shoveler ModSHELL is an easy to use shell program for GutMOD and DMP. To use ModSHELL type MODSHELL at the command, and simply use the arrow keys to select the mod you wish to play then press . However there are a few option which you should be aware of. Below is a screen capture from ModSHELL.. úÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ. ú.ú- ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ :ModSHELL Cerberus -/- Gut Shoveler 1994(C)³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ.-- .ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ AUDKRAFT B&B BARTMAN COMEASYO ECSTACY FLYING GUITARSL HEAVDOOR IMAGIME T-STRUCK ÚÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³F1 ³F2 ³F3 ³F4 ³F5 ³ ÃÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³GutMOD  ³Sound Blaster  ³Sampling ³File Directory: ³Player Directory ³ ³ ³ ³Rate: ³ ³ ³ ³DMP ³PC Speaker ³12000 ³C:\SB\MOD ³C:\SB\MOD ³ ÃÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³F6 - Delete File³ Press Q to quit ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ F1 and F2 are toggles, F1 selects either GutMOD or DMP, and F2 selects either the Soundblaster, or PC Speaker. F3 lets you enter the desired sample rate to be passed to the mod player. F4 lets you enter the directory the mod files are in, and F5 lets select the directory that the mod playing program is in. F6 lets you kill a mod file you do not want. Note About Sampling Rates Sampling rate, or referred to in GutMOD as mix rate, should be set as high as possible for your machine. The upper limit for GutMOD is in the neighborhood of 35k. 8000 is usually the lowest one would want to go, and somewhere between 8000, and 10000 will work on a 386/16.. On a 386/25 you can go as high as 14-15k. If you have a 386/40 or better you can pretty much run what you want to.. If you are stuck with a Pc speaker it stops squealing at around 28k, but 30k starts to sound kinda ok.... if you have any questions, comments, or suggestions contact Gut Shoveler, or cerberus as Shroud Of Deception 1-616-775-2945 ***EOF***