Jaleo displays the componet (below, 200h-A00h) and the error code along with a short text whenever it feels something's up. Nothing is fatal so any error can be disregarded (if it plays, it plays). The error code is a hex number, so if it says 0A23 ERR_TOOMANYPCS, it means that the error is 0A00 (patch related) and 0023 (35 decimal, too many PCs or invalid file (possibly corrupt)). RKE = 200h ;Kernel related (for example, 0204h means no more handles) RSE = 300h ;Sys related R2E = 400h ;Ruckus related RME = 500h ;MIDI related RVE = 600h ;Vox related RDE = 700h ;Trak related RCD = 800h ;CD-audio related RMX = 900h ;Mixer related RPE =0A00h ;Patch related ;DOS-type errors generated/returned by Ruckus ERR_UNXEOF EQU -3 ;unexpected end of file DOS (65533) ERR_DISKFULL EQU -2 ;disk full DOS (65534) ERR_NOMEMORY EQU 8 ;cannot allocate required memory from DOS ;Also: ;errors such as RPE+02 means DOS error "file not found" occured during ;a patch releated action (bogus filename in R2GUS.INI, for example) ;see the DOS errors at the end for a list (DOS errors will under 20) ;the other errors are extended error codes (check a DOS programmer ref). ;kernel errors ERR_NOHANDLES EQU RKE+21 ;no handles left from ss$Malloc for MCB ERR_BADHANDLE EQU RKE+22 ;handle not valid from ss$Free for MCB/xms$ too ERR_MEMCORRUPT EQU RKE+23 ;memory corrupt from ss$Malloc for MCB ERR_NOMEMKRN EQU RKE+24 ;no/not enough memory from ss$Malloc for MCB ERR_NOMATCH EQU RKE+25 ;EnvVar not found ERR_XMSFAIL EQU RKE+30 ;XMS general failure (check xms@lastErr,lastErrFunc) ERR_NOXMSMGR EQU RKE+31 ;xms$Init called but no XMS manager installed ERR_XMS16MB EQU RKE+32 ;XMS allocation crossed 16MB (no-go for ISA DMA) ERR_FILE64MB EQU RKE+33 ;XMS file cache filesize >= 64MB ERR_XMSFC255 EQU RKE+34 ;XMS file cache has no XF slots available ERR_XMSHDL7FF EQU RKE+35 ;XMS handle conflict (SuperCache) ERR_VDSFAIL EQU RKE+40 ;VDS general failure ERR_VDSLOCKFAIL EQU RKE+41 ;VDS region lock failed ERR_TIMEROFF EQU RKE+50 ;selected timer is not set up/not init'ed ERR_TIMERINUSE EQU RKE+51 ;selected timer already in use ERR_TIMERUPSO EQU RKE+52 ;selected timer cannot be used (not responding) ERR_STUBDEV EQU RKE+98 ;device is stubbed out ERR_STUBCOMP EQU RKE+99 ;component is stubbed out ;sys errors ERR_NOMORESLOTS EQU RSE+21 ;no more tracker slots for permanent DOS store ;device init/access errors ERR_ILLEGALCMD EQU R2E+21 ;command code not valid ERR_NODEVICE EQU R2E+22 ;device (in context) not detected/not valid device# ERR_DEVICEON EQU R2E+23 ;device has already been installed ERR_DEVIRQ EQU R2E+24 ;device fails IRQ test (NYI) ERR_DEVDMA EQU R2E+25 ;device fails DMA test (NYI) ERR_DEVNOTIMER EQU R2E+26 ;device has no on-board timer ERR_NOMEMDEV EQU R2E+27 ;device has no RAM available ERR_NOTINGEAR EQU R2E+28 ;device has not been installed ERR_DMATIMEOUT EQU R2E+31 ;DMA transfer did not signal completion (see RPE) ERR_DMABADMODE EQU R2E+32 ;DMA mode not valid for request ERR_DMABUSY EQU R2E+33 ;DMA channel already in use ERR_DMAGRAM256 EQU R2E+39 ;GRAM 256K page crossing on DMA attempt [GUS] ERR_BADENVVAR EQU R2E+91 ;requested EnvVar not found or incomplete ERR_BADPATH EQU R2E+92 ;path+filename+ext > MAX_PATHSIZE or null ERR_MMSSCORRUPT EQU R2E+93 ;general memory manager is corrupt ERR_MMSSLOCKFAIL EQU R2E+94 ;general memory manager lock failed ERR_INVALIDTASK EQU R2E+99 ;internal error ;MIDI file errors ERR_FORMATMIDI EQU RME+21 ;file is not of type 0 or type 1 ERR_TRACKSMIDI EQU RME+22 ;file contains too many tracks (more than 48) ERR_TIMINGMIDI EQU RME+23 ;file division timing not metrical ERR_HEADERMIDI EQU RME+24 ;file does not start with "MT" ERR_CHUNK64K EQU RME+25 ;file has track >= 64K (convert to type-1 to fix) ERR_NOTAVAILMIDI EQU RME+30 ;function not available unless playing (AdjustTempo) ;VOX errors ERR_BADIOBID EQU RVE+21 ;IOB id is out of range (valid is 0-7) ERR_BADATTNPTR EQU RVE+22 ;attention ptr not pointing to "aV" structure ERR_NOMEMIOB EQU RVE+23 ;no memory for IO buffer ERR_NULLIOB EQU RVE+24 ;IOB id is not primed ERR_IOBNOTAVAIL EQU RVE+25 ;IOB id is not available, or none are available ;patch/voice allocation errors ERR_UNKPATHDR EQU RPE+21 ;patch file header is not known ERR_UNKPATINS EQU RPE+22 ;patch file contains more than 1 instrument [GUS] ERR_UNKPATLAYER EQU RPE+23 ;patch file contains more than 1 layer [GUS] ERR_OLDPATVER EQU RPE+24 ;patch file format is obsolete ERR_BADMODE EQU RPE+25 ;mode not supported for operation ERR_NOMEMDMA EQU RPE+26 ;no memory for temporary DMA transfer buffer ERR_NOCACHE EQU RPE+27 ;patch permanent store/cache not available (XMS) ERR_NOMEMPATCH EQU RPE+28 ;cannot allocate required patch memory ERR_INVALIDBANK EQU RPE+29 ;patch bank invalid ERR_NOINI EQU RPE+30 ;R2*.INI not found in current dir or in PATDIR= ERR_BADINI EQU RPE+31 ;R2*.INI has invalid format ERR_BADBANKINI EQU RPE+32 ;INI must at least contain [bank X] (X=default bank) ERR_BADDIRINI EQU RPE+33 ;INI [bank must at least include [dir=DEFAULT] ERR_NOPATCHINI EQU RPE+34 ;patch required not found in INI [bank] ERR_TOOMANYPCS EQU RPE+35 ;more than 512 Program Change events or invalid file WRN_PATCHFLAGGED EQU RPE+39 ;patchname starts with "*" in INI (WARNING only) ERR_NOPATCH EQU RPE+40 ;no program change info in .MID and no default patch ERR_BADPATCHNO EQU RPE+41 ;melo/drum patch out-of-range or not loaded ERR_NOPATCHMAP EQU RPE+42 ;drum patch out-of-range (percCh ky# doesn't map) ERR_PATCHBOGUS EQU RPE+43 ;patch contains out-of-bounds data ERR_PATCHIS8 EQU RPE+44 ;patch is already in low-rez form ERR_BADLOOPADDR EQU RPE+45 ;loop points not valid ERR_PATCHINUSE EQU RPE+46 ;patch number has already been allocated ERR_PATCHZERO EQU RPE+47 ;patch number is not allocated/no patch data ERR_BADVOICE EQU RPE+50 ;voice number not valid (user selected) ERR_VOICENA EQU RPE+51 ;voice is not available (already in use) ERR_VOICEACTIVE EQU RPE+52 ;voice active (cannot unassign w/o force) Errors_DOS -3 unexpected end of file (error codes < 0 are mine) -2 disk full -1 bad filename 0 no error 1 function not supported 19 disk write protected 2 file not found 20 unknown unit 3 path not found 21 drive not ready 4 too many open files 22 unknown command 5 access denied (see Specs_Networks) 23 data error (CRC) 6 handle invalid 24 bad request structure length 7 MCBs destroyed 25 seek error 8 not enough memory 26 unknown medium type 9 memory block address invalid 27 sector not found 10 environment invalid 28 printer out of paper 11 format invalid 29 write fault 12 access code invalid 30 read fault 13 data invalid 31 general failure reserved-0Eh 32 sharing violation 15 disk drive invalid 33 lock violation 16 cannot remove current directory 34 disk change invalid/wrong disk 17 not same device 35 FCB unavailable 18 no more files 36 sharing buffer overflow 37 code page mismatched 58 incorrect response from net 38 handle EOF 59 unexpected network error 39 handle disk full 60 incompatible remote adapter reserved-28h 61 print queue full reserved-29h 62 no spool space reserved-2Ah 63 not enough space to print file reserved-2Bh 64 network name deleted reserved-2Ch 65 network access denied reserved-2Dh 66 network device type incorrect reserved-2Eh 67 network name not found reserved-2Fh 68 network name limit exceeded reserved-30h 69 NETBIOS session limit exceeded reserved-31h 70 sharing temporarily paused 50 network request not supported 71 network request not accepted 51 remote computer not listening 72 print/disk redirection paused 52 duplicate name on network reserved-49h 53 network pathname not found reserved-4Ah 54 network busy reserved-4Bh 55 network device no longer exists reserved-4Ch 56 NETBIOS command limit exceeded reserved-4Dh 57 network adapter hardware error reserved-4Eh reserved-4Fh 컴컴컴컴컴컴컴 DOS Class Codes 80 file exists 81 duplicate FCB 1 out of resources 7 app error 82 cannot make 2 temporary situation 8 not found 83 fail on INT24 3 authorization 9 bad format 84 out of structures 4 internal error 10 locked 85 already assigned 5 hardware failure 11 media failed 86 invalid password 6 system failure 12 already exist 87 invalid parameter 13 unknown 88 network write fault reserved-59h DOS Action Codes DOS Locus Codes 90 sys comp not loaded 1 retry immediately 1 unknown 2 delay and retry 2 block device 3 reenter input 3 network 4 abort ASAP 4 serial device 5 abort immediately 5 memory 6 ignore error 7 user intervention ; ;