UTILITIES  TERRY LAHMAN                
Vol. 9, No. 1                       


PCREMOTE

Command

Terry Lahman  January 16, 1990  (Utilities)

Purpose: To permit accessing and operating an off-site computer from your own 
         keyboard by using a modem link.

Format:  PCREMOTE [/M] [/2] [/F] [/D]

Remarks: PCREMOTE is actually two programs in one.  Entered without the /M 
         switch it becomes RAM-resident on the off-site computer to be 
         controlled.  This machine and its modem must be left powered on to 
         receive calls, but may otherwise be used normally or left unattended.

	 To gain access and control over the off-site computer, execute 
         PCREMOTE /M from the command line of your own machine.  You will be 
         prompted to enter a phone number, which will then be dialed 
         automatically.  Upon connection, the off-site computer will prompt 
         you for a password, which you must enter correctly within three tries.
         The default password is PC Magazine (see the note below).

	 After password verification, you can execute all text-based 
         (non-graphical) programs on the off-site computer by entering the 
         appropriate keystrokes at your own keyboard.  (The keyboard of the 
         off-site machine remains active, as well.)  All screen displays that 
         appear on the off-site machine will also appear on your monitor.  

	 To terminate PCREMOTE enter Alt-x and confirm your intention by 
         responding yes at the prompt window.  Both computers will then hang up
         the phone and your machine will return to DOS.  The off-site computer
         will continue to execute any program that was begun before PCREMOTE 
         was terminated.  The off-site machine can thus print out large files 
         while you are off line, given sufficient paper.

         PCREMOTE defaults to COM1 at 1200 bps.  Using the optional /2 switch 
         on its command line will engage COM2 insead of COM1.  Similarly, the 
         /F switch sets the bps rate to 2400.  If you are using a CGA card and 
         snow is a problem, use the /D (Desnow) option on the command line. 

Note:	 You can change your password with DEBUG.  A new password of up to 20 
         characters may be entered, within single quotes, at address 1F3h of 
         PCREMOTE.COM.  The length of the new password (not including the 
         single quotes) must also be entered, in hex, at address 1F1h.