VASTUS 2.00
                                 ===========

Resistor size calculation program by: MaLaSoft 1995

SETTING UP:
===========
- Run setup program 
- Select the language what you want to use
- Select input device, keyboard or mouse
- configure the usage of keyhelp
(keyhelp is needed in program when used keyboard, especially if you are a
new user)

! the VASTUS2.EXE won't run if you didn't ran the setup.


USING VASTUS WITH MOUSE
=======================
Click the buttons witch match the colours of rings on resistor.
 (note that darkgray-coloured button is black) 
Size of resistor, if ohms, will be showed below.

if you choosed an impossible combination, program returns message:
NOT SUITABLE RINGS

You can clear the 'resistor' by pressing the 'C'-button.
You can take off the last ring by pressing the ''-button.

Exit program by pressing Quit-button.


USING VASTUS WITH KEYBOARD
==========================
Click the buttons witch match the colours of rings on resistor.
 (you can see right keys when using keyhelp)
Size of resistor, in ohms, will be showed below.

If you choosed an imbossible combination, program returns message:
NOT SUITABLE RINGS

Yoy can clear the 'resistor' by pressing ESC.
You can take off the last ring by pressing BackSpace.

Exit program with Q-key.


SORRY
=====

- Sorry about the bad english !

PS
==

- gold and silver will flash in 'resistor'.