------------------------------------------------------------------------------ ------------------------------ KOHDISTIN 1.02 -------------------------------- ------------------------------------------------------------------------------ Do the characters appear too slowly on your screen? Your problem has been solved. KOHDISTIN is a program that sets the keyboard's repeat speed (typematic rate) and repeat delay. USAGE: KDN speed delay You have to give the BOTH values. Speed 0 - 31 (0 fastest) Delay 0 - 3 (0 shortest) If you give incorrect value(s), you will be informed and no other action will be taken. If there are other characters than numbers in parameters, the both values are set to zero. Here is some further information: REPEAT SPEED (TYPEMATIC RATE) ----------------------------- When you continuously push a key, a character will be repeated as long as you wish. But it may be very frustrating if the speed is low. Try yourself and find the suitable value: 0 = 30.0 13 = 9.2 26 = 3.0 1 = 26.7 14 = 8.6 27 = 2.7 2 = 24.0 15 = 8.0 28 = 2.5 3 = 21.8 16 = 7.5 29 = 2.3 4 = 20.0 17 = 6.7 30 = 2.1 5 = 18.5 18 = 6.0 31 = 2.0 6 = 17.1 19 = 5.5 7 = 16.0 20 = 5.0 8 = 15.0 21 = 4.6 9 = 13.3 22 = 4.3 10 = 12.0 23 = 4.0 11 = 10.9 24 = 3.7 12 = 10.0 25 = 3.3 REPEAT DELAY ------------ There is a delay before the repeating starts. It can be one of the following: 0 = 250 ms 1 = 500 ms 2 = 750 ms 3 = 1000 ms ------------------------------------------------------------------------------ If you find this program useful and want to continue using it, please send me the registeration fee. It isn't much! Only 20 FIM or an equivalent in American dollars (please read SHAREWAR.NFO file for more info). If you have any comments or suggestions, write to the following address: Sanna V„„t„nen Hautalahti Pj. 58999 Savonlinna FINLAND