ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º MTV Make Them Anything ³ D.I.S.P. ³ÄÄÄÄ¿ º Convert Compressed ³ ³°°°°³ ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ ³°°°°³ º (c) 1994 Robert W.van Hoeven ³ Dutch ³°°°°³ ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ Independent ³°°°°³ º Release : 15.57 ³ ShareWare ³°°°°³ º Rel.Date: March 7th, 1994 ³ Programmer³°°°°³ ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ°°°°³ º | ³°°°°°°°°°°°°°°°°°³ º ³ MTV.EXE / MTV.CH1 | ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º ³ | ÚÄÄÄÄÄ¿ | º ³ | ³°°°°°³ | º ³ | ÀÄÄÂÄÄÙ | º ³ | ÚÄÄÄÄÁÄÄÄÄ¿ | º ³ ------³³³³³³ ÍÍͳ------- º ³ ÀÄÄÄÄÄÄÄÄÄÙ º ³ º ³ º ³ ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ º Address: Robert W. van Hoeven º PO. Box 131 º 1170 AC Badhoevedorp º Nederland / Holland ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 0 ³ Table of contents ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1 ---- General information 1.1 Copyrights and License Agreement 1.2 Newer versions and contacting the author 2 ---- Package description and requirements 2.1 Preface 2.2 Requirements 2.3 Included files 2.4 History 2.5 Introduction & specs 3 ---- Installation description 3.1 Installation 4 ---- Runtime information 4.1 Command-line switches 4.2 I/O recovery 4.3 Multitaskers 5 ---- Version information and credits 5.1 The BETA-team 5.2 Credits 5.3 Version history 5.4 Copyright, Trademarks ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 1 ³ General information ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1.1 Copyrights and License Agreement ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ - Users of the MTA-package must accept this disclaimer of warranty: - The MTA-package is supplied as is. The author disclaims all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The author assumes no liability for damages, direct or consequential, which may result from the use of the MTA-package; - The MTA-package is a "shareware program" and is provided at no charge to the user for evaluation. Feel free to share it with your friends, but please do not give it away altered or as part of another system. The essence of "user-supported" software is to provide personal computer users with quality software without high prices, and yet to provide incentive for programmers to continue to develop new products. - If you find this program useful and find that you are using and continue the use of the MTA-package after a 30 days trial period, you must register the MTA-package as described below; - Non-commercial can get a license for the usage up to this release of the MTA-package for a small amount of money. Look into the details in REGISTER.MTA. Previous registered users will receive a big reduction to upgrade to the newer versions. These users should look into the details in UPGRADE.MTA. For Non-commercial users there is a POSSIBILITY to submit to one of the special contracts as explained in the file REGISTER.MTA. - Commercial usage of MTA will cost somewhat more. Also, a so called 'closed' Bulletin Board System (a system where the user must pay direct to the SysOp to get full access) is has to pay more than a Non-commercial user. Both types of users should look into the details in REGISTER.MTA; - The registration of the MTA-package will license ONE copy for use on any computer at any one time, as long as the usage confirms to the type of registration you have done (so NON-commercial usage when you have a non-commercial license); - Anyone distributing the MTA-package for any kind of remuneration must first contact the Author at the address above for authorization. - You are encouraged to pass a copy of the MTA-package along to your friends for evaluation. Please encourage them to register their copy if they find that they can use it; - Support on MTA, when used in a non-commercial environment, is available by means of written letters or by entering the inter- national echomail area DISP; - Problems and suggestions can be entered in the FidoNet Echomail conference called DISP (international). Entering this echo does not exclude you of the duty to register the MTA-package, though users who evaluate the product can enter the echo for questions; - The MTA-package, all programs, the documentation and support-files is copyrighted 1990,94 by Robert W. van Hoeven, PO. Box 131, Badhoevedorp 1170AC, Holland. All rights are reserved. You may copy this package for backup purposes. Also you may copy and share unmodified copies of the whole package, providing that the copyright notice is reproduced and included on all copies. Excluded from this statement are the support-files written by other authors. Please refer to the documentation of these programs for copyrights and license agreements; - It is forbidden to modify, adapt, translate, reverse engineer, decompile and/or disassemble the software in the MTA-package. Patching the medium at places that carry the software is seen as a program change and is also forbidden. It is forbidden to create a so called 'bypass' to skip the original introduction screens and delay. Also it is forbidden to use such a 'bypass' unless supplied by the author (Robert W. van Hoeven) himself; - Performing any of the illegal actions as stated in the previous lines, is a theft and no fair play to the author and, more important, to the registered users; - Bulletin Board Systems that distribute the MTA package can convert the WHOLE package to any archive-system they like but all original files must be included in the new archive. The MTA-package on the Bulletin Board can contain at the most 2 extra files. These files can only be a commercial for that Bulletin Board and/or validation data that is presented as a service to all users and shall have no other functions; - After the normal trial period of 30 days, you must register the soft- ware (see REGISTER.MTA) or you must remove it from your PC; - Comments, suggestions and bug reports are welcome and will be answered as soon I have the time to do so. You can send me a letter of leave a NetMail message named to Rob Van.hoeven (mind the point) on node 2:281/904 (PB Support, Monster, Holland, SysOp is Reinier de Groot). When you want to send me normal mail, address it to: Robert W. van Hoeven, PO. Box 131, 1171 AC Badhoevedorp, Holland; Also you can enter messages in the FidoNet DISP Echomail area; 1.2 Newer versions and contacting the author ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The newest version of MTA is always available at the DISP-HQ on node 2:281/904. MTA is also distributed thru a number of DISP support nodes and thru some forums in CompuServe. There are six ways in which you can obtain newer versions of MTA: - Logging on at DISP-HQ or a support node (FidoNet) Look into the file SUPPORT.MTA for a full list of support nodes; - Logging on to a SDS node MTA is distributed thru SDS/SDN, but only big minors (x.10, x.20 and so on) and majors (14.01, 15.01 and so on) are submitted to the SDS distribution point in Holland; - Logging on to your own BBS; Chances are, that you will find an older version (international users) because it will take some time for the new version to 'bleed' thru the net; - Logging on to CompuServe; Important versions of MTA are uploaded to several CompuServe forums. It is intended to upload versions to the SYMANTEC and IBMSYS forums but depend on the authorization of the forum sysops. If you are not sure, you can contact me on CompuServe personally; - Update service; You can enter a special update service (read REGISTER.MTA). If you think you have found problems in MTA, or in any other case, you wish to contact the author, you can send me: - A letter to the address you can find in the header of this file; - A NetMail message to Rob Van.hoeven (please mind the point between Van and Hoeven) at 2:281/904 or (better) 2:281/904.5; - A Message in the FidoNet DISP echomail area; - A message (mail forum) in CompuServe to user Robert van Hoeven, with account/user number 100120,1146; ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 ³ Package description and requirements ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 2.1 Preface ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ MTV was previously a stand-alone product but is now added (with some 'small' documentation) to the MTA package. It is a file-finder in the best 'MTA-style' while still very fast but from a different point of view as most file-finders (this one is colorful and full-screen). 2.2 Requirements ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ MTV requires: - PC XT/AT/386/486 - At least 390K free memory - DOS 3.xx or higher (4.xx not tested) (tested with 4Dos 4.xx, should work with lower versions); - DOS 2.xx ONLY when registered. In this case, a customized version will be created; - HDU optional - Mouse optional 2.3 Included files ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The package includes : MTV.EXE The main program MTV.CH1 The chained tag-menu module 2.4 History ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ There are many file-finders, most of them quick, some of them with nice displays, others who include one or more compression files and few of them with manipulation options. In a 'lost moment' I wrote another file-find, more as a study on disk/file-I/O then as a serious program. This resulted in the first release of GOF (Global Object Find). In the past years GOF was enhanced a few (more than a few) times and finally included in a whole series of programs that I call the 'Make Them' series, first as a stand-alone product and in 1993 as part of the MTA package. When you know or have one or more of the other 'Make Them' programs, you will see that MTV has the same structure in display and command line options as the rest of the series have. Further more, MTV is an addition to the rest of the 'Make Them' series. 2.5 Introduction & Specs ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ MTV has the following features included: - Fast file find; - Full color; - DesqView/TopView aware; - Includes searching inside ARC, PAK, ZIP, ZOO, DWC, LZH and LZS files, ARC files in SEA , PKware and Nogate format. Also newer archivers like ARJ, SQZ and HYPER are included; - MTV is able to detect EXE files processed with LZEXE (0.90/0.91) and EXE and COM files processed with PKLITE; - Build-in file-move; - Build-in file-copy; - Build-in file-delete; - Build-in file-touch; - Can create batch-files with user implemented structure. Uses a form of macro language to implement various variables in the batch-file; - Can create a listing on disk (printable); - Can work on multiple drives; - Complete wild-card support including up to 20 masks and included an extra wildcard for shifted search; - Can halt when a file is found; - Can run unattended; - Has a feature to search multiple diskettes very quick; MTV is implemented with complete ASSIGN and SUBST support so these drives are not handled like normal drives. The same goes for the detection of CDRom. ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 3 ³ Installation description ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 3.1 Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Installation is simple and straight forward. You can set the MTV defaults with MTV.EXE itself and you can later overrule them with command-line switches. A sample installation looks like this: - Copy MTV.EXE to a directory somewhere in the DOS-PATH; - Copy MTV.CH1 to a directory somewhere in the DOS-PATH; - Make the directory containing MTV.EXE the default directory; - Run MTV.EXE with the /INSTALL command-line parameter and answer all the questions. MTV will patch these changes in MTV.EXE itself; - Don't (never) use DIET, PKLITE or LZEXE (or alike) programs to compress MTV. When you do so, MTV is unable to patch itself; A note on the video-mode. You can set MTV to work in a different video-mode than normal (like 132x60 or 80x43). Find out the value of these (TEXT!!) modes in the manual of your video-card and set the installation to that DECIMAL (please convert hexadecimal values) value. This will only be valid on EGA (and higher) video cards. Please remember to leave MTV.CH1 on the disk. This is a chained program that contains ALL the help-information, sometimes needed by MTV. ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 4 ³ Runtime information ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 4.1 Command-line switches ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ MTV is installed with /INSTALL but almost anything can be changed and overruled with command-line switches. The syntax to start MTV is: MTV {filespec} {filespec}..{filespec} {drive}..{drive} {switches} Switches must start with a slash ('/') and are separated with one or more spaces. You can supply MTV with a maximum of 20 different filespecs (e.g. *.ARC *.PAK *.ZIP). Start MTV with /? to see a list of options. If you do not supply a file-mask, '*.*' is assumed. You can supply multiple drives to search (up to 26 at a time). In that case you must supply the drive-letter with ':' included as a separate option. For example, search for *.BAK on C, D and F: MTV *.BAK C: D: F: MTV is implemented with an extra wildcard ('='). This mask is used to do a shifted search. When you use '=', MTV will look for characters following after the '=' character on a 'shifted' basis. This means: =AR is found in dARwin.exe, ARchive.bat and wARn.ctl but NOT in kwnA.Ref =A.R is found in kwnA.Ref but NOT in dARwin.exe, ARchive.bat and wARn.ctl You must separate every option in the command-line with one or more spaces. You can mix all options. A complete list of switches follows: ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /INSTALL ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ When you use this command-line parameter, you can change the DEFAULT settings of MTV. MTV.EXE /INSTALL will patch the defaults into MTV.EXE itself. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /ARC ³ ³ /ARC+ ³ ³ /ARC- ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ This is the archive toggle. When you have installed MTV with as a default NOT to look inside archives, you can supply /ARC to temporary overrule this option. The same goes for when you have installed MTV with the option to look inside archives. When using the simple /ARC form, /ARC works like a toggle and you must remember what the in- stalled value was. You can also use /ARC+ or /ARC-. In the case of /ARC+ MTV will search the archive for the duration of this run, with /ARC- MTV will NOT search the archives during this run, both independent of the installed value; ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /ALL ³ ³ /ALL+ ³ ³ /ALL- ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ This is the special archive toggle. When you have installed MTV with as a default NOT to look inside all files for archive code, you can supply /ALL to temporary overrule this option. The same goes for when you have installed MTV with the option to look inside archives. When using the simple /ARC form, /ARC works like a toggle and you must remember what the in- stalled value was. You can also use /ARC+ or /ARC-. In the case of /ARC+ MTV will search the archive for the duration of this run, with /ARC- MTV will NOT search the archives during this run, both independent of the installed value; ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /OA ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ When you supply this switch MTV will ONLY look inside the archives. All normal filenames (including the filename of the archive itself) are ignored. Only files inside archives (and SFX files if /SFX is coded) are displayed. When you told MTV not to look inside archives (by default with the /INSTALL on MTV.EXE or with the /ARC switch) and you supply this switch, an error message will occur. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /SFX ³ ³ /SFX+ ³ ³ /SFX- ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ When you supply this switch AND you have instructed MTV to look in- side archives, MTV will also test every .COM and .EXE file for SFX marks. If the .COM or .EXE is a SFX (Self extracting compressed file), MTV will display the files inside the SFX file if they match the masks. ARC (SEA/NoGate/PKware), ZIP, LZH, LZS, ARJ, SQZ and HYP SFX-files are recognized. You can also use /SFX+ or /SFX-. In the case of /SFX+ MTV will search for SFX-files for the duration of this run, with /SFX- MTV will NOT search for SFX-files during this run, both independent of the installed value; ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /S ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you supply /S, MTV will scroll continuous. This is handy when you want to use MTV in an unattended environment. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /H ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ When you want to search all your NON-floppy drives, you can supply /H. This is the same a coding all the drive-letters of your NON- floppy drives, but much more compact. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /R ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you supply /R, MTV will do a recursive search on ONE drive. You must always combine /R with only 1 drive (like a: /R). This switch is handy when used on floppy drives. MTV searches the diskette and will ask for the next one. You can abort the process by hitting [ESC]. MTV will automatically ask for the removal of a diskette and recognizes the insertion of the next (valid) diskette. There must be a little delay between removal and insertion otherwise MTV will not 'see' the change, but with normal (very fast) manual diskette operation the delay is long enough. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /1 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ This switch, when supplied, means that you only want to look in the current directory. When the /R switch is supplied with /1, /R has no function. MTV will stop after 1 drive (and directory). ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /INF ³ ³ /INF- ³ ³ /INF+ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ /INF is a toggle switch. When you have installed MTV with default drive information to YES, you can overrule this with /INF. The same goes for when you did NOT install MTV with default drive information to YES. When using the simple /INF form , /INF works like a toggle and you must remember what the in stalled value was. You can also use /INF+ or /INF-. In the case of /INF+ MTV will display disk-information during the duration of this run, with /INF- MTV will NOT display disk information during this run, both independent of the installed value; ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /LIT ³ ³ /LIT- ³ ³ /LIT+ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ /LIT is a toggle switch. When you have installed MTV with default LZEXE/PKLITE to YES, you can overrule this with /LIT. The same goes for when you did NOT install MTV with that default. When using the simple /LIT form , /LIT works like a toggle and you must remember what the in stalled value was. You can also use /LIT+ or /LIT-. In the case of /LIT+ MTV will display PKLITE/LZEXE info during the duration of this run, with /LIT- MTV will NOT display this information during this run, both independent of the installed value; ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /GIF ³ ³ /GIF- ³ ³ /GIF+ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ /GIF is a toggle switch. When you have installed MTV with default GIF-search to YES, you can overrule this with /GIF. The same goes for when you did NOT install MTV with that default. When using the simple /GIG form , /GIF works like a toggle and you must remember what the in stalled value was. You can also use /GIF+ or /GIF-. In the case of /GIF+ MTV will search of GIF files during the duration of this run, with /GIF- MTV will NOT display this information during this run, both independent of the installed value; ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /SY+ or /SY- ³ ³ /RO+ or /RO- ³ ³ /HI+ or /HI- ³ ³ /AR+ or /AR- ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ /SY+ file MUST have the SYSTEM attribute ON; /SY- file MUST have the SYSTEM attribute OFF; /HI+ file MUST have the HIDDEN attribute ON; /HI- file MUST have the HIDDEN attribute OFF; /RO+ file MUST have the READ-ONLY attribute ON; /RO- file MUST have the READ-ONLY attribute OFF; /AR+ file MUST have the ARCHIVE attribute ON; /AR- file MUST have the ARCHIVE attribute OFF; For example MTV *.* /HI- /RO+ : searches all files with any name with the HIDDEN attribute set to OFF and the READ-ONLY attribute set to ON; ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /LT[len] ³ ³ /GT[len] ³ ³ /EQ[len] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ /LTnnnnnn the file-length must be less that nnnnnn; /GTnnnnnn the file-length must be greater that nnnnnn; /EQnnnnnn the file-length must be equal to nnnnnn; For example MTV *.* /HI- /EQ1024 : searches all files with the HIDDEN attribute to OFF and have a file-length equal to 1024 bytes; ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /DL[date] ³ ³ /DG[date] ³ ³ /DE[date] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ /DLmmddyy the file creation-date must be less than mmddyy; /DGmmddyy the file creation-date must be greater than mmddyy; /DEmmddyy the file creation-date must be equal to mmddyy; You have to remember one thing. The date you supply in mmddyy must be of the SAME format you have installed with MTV /INSTALL. So if you want to display in the format DD-MM-YY, you have to code the switches in the format /DLddmmyy. If you display in the format mmddyy, you have to code the switch in the format /DEmmddyy. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /C{path} ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you supply /C, MTV will copy all selected files to {path} (or when {Path} is not supplied, to the current directory). If you did not use /N, MTV will ask a confirmation for every file. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /M{path} ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you supply /M, MTV will move all selected files to {path} (or when {Path} is not supplied, to the current directory). If you did not use /N, MTV will ask a confirmation for every file. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /D ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you supply /D, MTV will delete all selected files. If you did not use /N, MTV will ask a confirmation for every file. If you supplied /N with a mask *.* ALL FILES ON THE SELECTED DRIVES ARE DELETED !!!!!!! ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /T ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you supply /T, MTV will touch all selected files with the current date (e.g. reset the creation date/time to today). If you did not use /N, MTV will ask a confirmation for every file. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /J ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you supply /J, MTV will jump to the directory where the file is found and terminate. If you did not use /N, MTV will ask a confirmation for every file. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /E ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you supply /E, MTV will terminate when a file is found. If you did not use /N, MTV will ask a confirmation for every file. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /SP ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you supply /SP, MTV will submit every found file to the print spooler (PRINT.COM). The switch may not be used with the /M and /D switch. This function only works when PRINT.COM is loaded. Please remember that you have to deal with the maximum number of files PRINT can handle. Also this version only works with DOS 3.xx and higher. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /N ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ All manipulation switches ask for a confirmation. If you want to run MTV unattended, you must supply /N and no questions are asked. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /F ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ When you supply /F, MTV will create a file called FILELIST.BAT in the current directory. After MTV starts, it asks you for the format of this file. You can use a number of macro's that MTV substitutes in every record of the FILELIST.BAT. For every 'hit' MTV will write one or more (up to 20) records in FILELIST.BAT. You have to supply these records when MTV starts. With this option you can create a batch-file that can do extensive manipulations on every found file. When you supply records to MTV, MTV has to know where to put some of the variable information like the filename. You can include a number of macro's (parameters) in every (or some) of the records you supply to MTV. These are: [1] De full filename (ffffffff.eee) of the found file; [2] Only the name portion of the found file (ffffffff); [3] Only the extension of the found file (.eee); [4] The pathname (without the trailing backslash) where the file is found; [5] Only the drive (d:) where the file is found; [6] The filename of a file INSIDE an archive; [0] Instruct MTV to only write this record when MTV works on a file INSIDE an archive. If you do not supply [0], MTV only writes a record when it works on a file and not when it works on a file INSIDE an archive; Besides the normal records for every found file, it is possible to start and end the FILELIST.BAT with some common instructions. When you start a record with [S] (or [s]) it is only written once at the start of the FILELIST.BAT file. When you start a record with [E] (or [e]) it is only written once at the end of the FILELIST.BAT file. The options [0]/[6] do not work in these records. There can be up to 10 of each [S] and [E] records. When running unattended, you can instruct MTV to load the record- layouts from a macro-file. When running attended you can also load these macro's. You have to supply @macroname in position 1 of the first record-layout. MTV will load the macro and start the file search. Some examples of macro's are found in the original installation archive. After MTV is ended you can start FILELIST.BAT in the current directory. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /F@[macro] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ When you want to use a somewhat common layout for the FILELIST.BAT you can create a macro for that function (look at the examples). You can start MTV with that macro when you supply the /F@macroname switch on the command-line. MTV will search for the macro in the DOS-PATH, in the current directory or (only DOS 3.xx and up) in the directory MTV.EXE was started from. You can not supply an extension to the macro-name. By default the extension of a macro MUST be .MVM. If you supply an extension, MTV will force the extension to MVM. In a macro-file you have the same options as with the manually entered parameters (see /F). In a macro-file you can use a '|' in position 1 of the record to mark that record as a comment, they are not written to FILELIST.BAT. You CAN NOT nest macro's !!! ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /X ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ When you supply /X, you instruct MTV to execute FILELIST.BAT before MTV terminates. This is an option you should use when you run MTV unattended. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /Q ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ MTV writes the FILELIST.BAT record(s) for every 'hit'. When you want to select some files and ignore others, you can supply /Q. MTV will ask for every found file, if records should be generated for that file. You can answer with a Y or N. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ /P{path}[filename] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ You can instruct MTV to create a file-listing on disk. If you want to do so, you have to supply the /P switch with a filename. MTV will write the complete listing in that file. You can add drive and path to the filename if the file is to be created on another location than the current directory. 4.2 I/O recovery ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ MTV will recover most I/O errors. A large part of the implemented coding is for I/O-recovery on FILELIST.BAT, the creation of the listing (/P) and for the /M, /D and /C switches. MTV will recognize a SUBST or ASSIGN'ed drive. This means that MTV does not 'see' a SUBST or ASSIGN as a REAL drive. CDRom drives are 'seen' as a real drive. MTV terminates with an errorlevel, depending on errors occurred (if any): 0 : Everything o.k. 1 : Everything o.k. but no matches found; 8 : I/O error creating FILELIST.BAT or the listing-file (/P); 16 : Errors in the command-line parameters; 4.3 Multitaskers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ MTV is fully DesqView-aware. You can run MTV in a DesqView window. You can set 'Direct Write to Screen' to 'N' and you can run MTV in a window of about 110K (when you include SFX files) or 90K when you don't use the SFX-option. Under IBM's OS/2, MTV is able to detect the files on HPFS drives in the same way as OS/2 exposes this files to all normal programs that run in a DOS-box. You should NOT manipulate files on a HPFS drive though (or take great care). ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 5 ³ Version information and credits ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 5.1 The BETA-team ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Look into the file SUPPORT.MTA for a full list of all beta-testers and support nodes. 5.2 Credits ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Thanks to the following people (besides my eternal thanks for the BETA team): - All paying, registered users. You made it possible to enhance MTA with nice features; - All users who did write me bug reports, suggestions and so on; 5.3 Version history ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 11.01 ³ Major version ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ þ Added ARJ, HYPER, LZEXE and PKLITE support; þ Added enlarged (EGA/VGA) screen support in text-mode; þ Fixed some textual problems; þ Added faster CFI-code; þ Added new HELP feature ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 11.30 ³ Major version ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ þ Added support for LHARC (LHA) 2.xx files; þ Added default videomode installation on MTVCFG ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 15.35 ³ Minor release ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ þ MTV is now part of the MTA package and the version number is altered to reflect this change; þ MTV is now compiled under Borland Pascal 7.0; þ Added several new archivers in MTV like PKZIP 2.xx, SQZ 108x and several extensions on ARJ (backup, paths and such); þ Added code to show GIF files and JPEG files in the file-list; þ Changed color scheme for archive files. Low intensity colors will now reflect archives that won't compress that much and high colors will be used for those archivers that compress the most (ZIP, LHA, ARJ, SQZ); þ Removed MTVCFG.EXE from the original MTV package. MTV can now be installed with the use of the /INSTALL command-line option of MTV. This will still patch MTV.EXE, so do not use compression programs that can compress COM/EXE files; ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 15.36 ³ Minor Release ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ þ Added coding to detect and work with the new ARJ 2.39d format; ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 15.40 ³ Minor Release ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ þ Fixed a problem where MTV was not able to detect CD-ROM drives in the correct way. MTV should now access a CD-ROM as a normal drive; þ Fixed a problem where MTV would add a superflous backslash in the FILELIST.BAT file, when a file in a root-directory matched the selection; ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 15.50 ³ Version Release ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ þ Only version number is changed; ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 15.55 ³ Version Release ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ þ MTV will now accept any drive, even if the internal routines detect it as an invalid drive. This to overcome the problem that MTV will not detect some network drives; þ MTV will now detect UC2 files and will show the type of compression for these files (when archives are searched); þ FILELIST.BAT was included in lists that were created with /F. This is fixed, the file will not be included anymore; ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 15.57 ³ Minor Release ³ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ þ Changed some of the installed defaults. When you receive the MTV.EXE from the archive, SFX, EXE-lite, ARC and GIF processing are off by default. You can (must) change them with either command-line options or by running MTV /INSTALL (to make them permanent); 5.4 Copyright, Trademarks ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ PKPAK, PKUNPAK, PKZIP and PKUNZIP are trademarks of PKWare Inc. PKLITE is a trademark of PKWare Inc. SQZ is a trademark of Jonas I Hammarberg. UC2 is a trademark of Ad Infinitum Programs (AIP-NL) PAK is a trademark of NoGate Consulting. ARC and XARC are trademarks of SEA inc. ZOO is a trademark of R. Dhesi. DWC is a trademark of Dean W. Cooper LZH and LHarc are trademarks of Yoshi; LZS and LARC are trademarks of K.Miki H.Okumura and K.Masuyama MD is a trademark of Michael Davenport ARJ is a trademark of Robert K. Jung HYPER is a trademark of Peter Sawatzki and Klaus Peter Nischke CRA is a trademark of DISP and donated to public domain DesqView is a trademark of Quarterdeck inc. Windows is a trademark of The Microsoft Corporation 4Dos is a trademark of J.P. Software / R.C. Conn and T. Rawson FrontDoor is a trademark of J. Homrichhausen SCAN is a trademark of McAfee Associates TBScan is a trademark of Frans Veldman / ESaSS B.V. HTScan is a trademark of Harry Thijssen VIRX is a trademark of Microcom Software Division CPAV is a trademark of Central Point Software FINDVIRU is a trademark of S&S International Dr. Solomon is a trademark of S&S International Gobbler is a trademark of COMRAC F-PROT is a trademark of Fridrik Skulason VALIDATE is a trademark of McAfee Associates QuickBBS is a trademark of Pegasus Software Remote Access is a trademark of Continental Software TICK is a trademark of Berry Geller FES is a trademark of Frank Ploenissen GIFLITE is a trademark of Tsung Hu JPEG 1.5 is a trademark of Handmade Software Inc. JPEG is a trademark of The Independent JPEG Group GIFTEST is a trademark of Dave Navarro Jr. OS/2 is a trademark of International Business Machines (IBM) PC-DOS is a trademark of International Business Machines (IBM) FileDoor is a trademark of Robert W. van Hoeven MTV is written in Borland Pascal 7.0, with help of the Turbo Debugger ³3.0 and makes extensive use of Object Professional 1.22 and OPCFI V ³20.03. Some routines are obtained from TurboPower's Asynch ³Professional 2.00. Borland Pascal is a trademark of Borland International Turbo Debugger is a trademark of Borland International Object Professional is a trademark of TurboPower Inc. Asynch Professional is a trademark of TurboPower Inc. Pascal+ is a trademark of StonyBrook software Inc. OPCFI is a trademark of Robert W. van Hoeven [======================== END OF DOCUMENT ============================]