Master Copy MCP.EXE The Better XCOPY Version 1.60 May 27, 1995 Copyright (C) 1993-1995 Michael Paul Johnson. All rights reserved. No warranty. Table of Contents INTRODUCTION RUNNING MCP MOVING FILES SYNCHRONIZING DIRECTORIES ZERO LENGTH FILES PROMPTS ERROR MESSAGES ERRORLEVEL NAME TRIVIA INTEGRITY CHECKS LIMITATIONS LEGAL NOTICES HOW TO CONTACT THE AUTHOR VERSION HISTORY INVOICE INTRODUCTION MCP (Master Copy) is kind of like XCOPY, but it normally only overwrites older files and it can move files. It was written primarily for use in keeping directory structures shared by different people (or by the same person on different computers) in synchronization with each other. It is also a quick way to implement disk mirroring style backups. It now has lots of options, possibly including one or two you would like to use. RUNNING MCP MCP is a DOS command line utility with a syntax that is an extension of the XCOPY that comes with DOS: MCP source [destination] [switches] Switches can be: /A = copy only files with Archive bit set (leave source archive bit set). /B = ask permission Before overwriting each existing destination file. /C = Copy & overwrite all files except those with identical date, time & size. /D = copy files with Date the same or later than Date given /D:mm-dd-yyyy /D:dd.mm.yyyy /Dmm/dd/yy /Ddd.mm.yy or /Ddays. /D- = copy files with Date earlier than Date given /D-mm-dd-yyy /D-dd.mm.yyy /D-mm/dd/yy /D-dd.mm.yy or /D-days. /F = Force overwrite of system, hidden, and read only files. /H = Copy system and Hidden files as well. /I = Inhibit actual copy. Tests what MCP would do. /J = Just copy files that already exist in destination directory. /L = List lots of loud verbose output (for troubleshooting). /M = copy only files with archive bit set (Modify source archive bit). /N = No overwrite. /O = Overwrite destination files. /P = Prompt before copy. /Q = Quiet (report only errors). /R = Rename or move files. /S = /E = recurse through Subdirectories (& create Empty ones). /T = Stop Twirling "propeller" (useful for redirection). /U = Update (overwrite only older files -- the default mode). /V = This switch doesn't cause an error message, but it doesn't do anything. It is included so that batch files written for XCOPY can use MCP with the same switches. (/V turns verify on in XCOPY). To turn on verify, use the DOS command VERIFY ON before using MCP. /W = Wait for keystroke before starting copy /Z = Zero source file archive bit. /? = Show help screen. On the command line, source is a file name or directory name, which may optionally include drive and path. It may also include DOS wild cards ? and *. If the source is a drive or directory, the file specification *.* is assumed. The destination is a file name or directory. If no destination is specified, the current directory is assumed. If there are wild card characters in the destination file name, they will be filled in with the corresponding characters in the source file name. If it is not obvious if the destination is a file or directory, you may be asked which you meant. To ensure that the destination is interpreted as a directory instead of a file, end the directory name in "\" or ensure that the destination directory already exists. If the destination directory does not exist, it will be created. Switches all start with "/" (not "-", since - is a valid file name character in DOS), and may be before, between, and/or after the source and destination. Switches may be combined. In case of a conflict between switches, the one that is farthest to the right on the command line takes precedence. For brevity, most command line switches may be run together after a single "/". Switches are not case sensitive. /A (Archive) and /M (Modify archive) both specify that only files that have the DOS directory archive bit set (indicating that they have been changed since they were last backed up) should be copied. /A does not alter the archive bit on the source file. /M clears the archive bit of the source file to indicate that it has been backed up. The archive bit of the destination file is always set when using MCP. These options can be used for backing up data when the largest file you want to back up will fit on your destination media. If the largest file you want to back up is bigger, a regular backup program is more appropriate than MCP. However, for some small but important files, backing up with a copy command like MCP makes more sense, because the file itself is not altered, making restoration possible even without the original backup program. For example, MCP /A C:\WORK\DOC\*.* A: copies all files in C:\WORK\DOC to the floppy disk in A: that have not been marked as backed up. /B (ask Before overwrite) causes MCP to stop and ask if you want to copy each file for which the destination file already exists. /C (Copy & overwrite all but identical date, time & size) will cause all destination files with the same name but different (older or newer) date & time or different size (smaller or larger) to be overwritten. /D (Date) is always followed by a date, a number of days old, or a dash then a date or number of days old. There is no space in between the /D and the date. If the first character after the date is a "-", then the copy is for dates before the date indicated. If the first character after the /D is a ":" or a number, then the copy is for dates on or after the date indicated. The colon following the D is optional. The order of the date is month day year if you use "/" or "-" to separate the numbers in the date. If you use "." to separate the numbers in the date, the order is day month year. The year can be specified with either the last two digits or all four digits. If you specify the last two digits, the year is assumed to be in the range 1980 through 2079. The month must be expressed as a number between 1 and 12. Leading zeros on month and day are optional. If you specify just a number of days instead of month, day, and year, then the date indicated is that number of days before the current date. For example, the following commands all copy everything with a file date on or after December 25, 1991 from the current directory to D:\SAVE\. MCP /D12/25/91 *.* D:\SAVE\ MCP /D:12/25/91 *.* D:\SAVE\ MCP *.* D:\SAVE\ /D12/25/1991 MCP /D12-25-91 *.* D:\SAVE\ MCP *.* /D12-25-1991 D:\SAVE\ MCP /D25.12.91 *.* D:\SAVE\ MCP /D:25.12.1991 *.* D:\SAVE\ To copy everything in the current directory dated on or after 30 days ago to D:\NEWSTUFF\, MCP /D30 *.* D:\NEWSTUFF\ To copy everything in the current directory dated earlier than thirty days ago to D:\OLDSTUFF\, MCP /D-30 *.* D:\OLDSTUFF\ To move all .DOC files in the current directory dated more than 90 days ago to E:\ARCHIVES\, MCP /R /D-90 *.DOC E:\ARCHIVES\ To copy everything in the current directory dated earlier than 31 December 1994 to C:\1994\, MCP /D-31.12.94 *.* C:\1994\ /F Forces overwriting of Hidden, System, and Read Only files. WARNING: use this option with caution. It is very useful for some situations, but could have some undesired side effects if you overwrite some files of this type. /H (Hidden & system) allows files with the system and hidden attribute to be copied. Note that the XCOPY that comes with MS-DOS 5.0 and MS-DOS 6.0 will not copy hidden files, but earlier versions will. The system and hidden attributes will be applied to the destination files when they are present in the source files. Note: copying the two hidden system files from a boot drive to another drive will not necessarily make the destination bootable. Use the DOS SYS command for that purpose. /J (Just existing) causes only those files that already exist in the destination directory to be copied over (and then only if they are older, the /o switch is used, or the /b switch is used and you answer Y for yes). /L (Loud) causes extra screen output to be generated, including the names of all files that are skipped. /N (No overwrite) prevents any destination files from being overwritten, regardless of the file dates and attributes involved. The default is to allow overwrites of destination files with an earlier file date. This is the opposite of /O (Overwrite always). /O (Overwrite always) causes destination files to be overwritten regardless of its file date. The default is to allow overwrites only of destination files with an earlier file date. This is the opposite of /N (No overwrite). /P (Prompt) asks you if you want to copy each file with a Y/n prompt. "N" or "n" will cause the file to be skipped. Most other keys, including "Y" and "y" will cause the file to be copied. The "Enter" key need not be pressed after the "y" or "n". For example, MCP /P *.* A: lets you pick exactly which files you want to copy to drive A:, one by one. /Q (Quiet) suppresses all screen output except for error messages and the help screen in response to a command line error or /?. For example, MCP /Q /M C:\WORK\*.* F:\MASTER\FRED\ in a network login script would be a subtle way to back up some critical directory on a user's hard disk to a network directory, where it could be moved to tape or something. /R (Rename or move) causes files to be renamed if the source and destination are on the same disk, or copied then the original deleted (after a successful copy) if the source and destination are on different disks. If the copy fails, the original is left intact. When used with the /S option, emptied subdirectories are not removed. For example, MCP C:\STUFF\*.DOC D:\OLDJUNK\ /R moves every .DOC file in C:\STUFF\ to D:\OLDJUNK\. /S or /E (Subdirectory copy) copies files and subdirectories from the destination to the source, making subdirectories as needed. Empty subdirectories are created as well. Using /S and/or /E on the command line of MCP is the same as using both /S and /E on the command line of XCOPY. /U (Update) overrides a previous /o, /b, or /n on the command line and returns MCP to its default handling of existing destination files (overwrite them only if they are older). /V does nothing. To turn verify on, use the command VERIFY ON before running MCP. /W (Wait) causes the prompt "Press a key when ready to start copy..." to be displayed, and the program to pause until you hit a key before starting the copy process. This is for use with floppy only systems, where the MCP command may reside on a disk other than the one you want to do the copy on. /Z (Zero source file archive bit) resets the source file's archive bit in its directory entry, marking it as backed up. /? (Help) shows the help screen. MOVING FILES Since moving files is a fairly common operation, you may want to define a doskey alias to move files (DOSKEY MV=MCP /R $*) or use the MV.BAT batch file. If you are using a version of DOS prior to 3.3, delete the @ from the beginning of the MCP command. This command lets you move files safely. Note that the original file will not be deleted if it is marked as "system" or "read only." Note also that when moving entire directory structures, source subdirectories are not deleted. To delete entire directory structures or to delete system or read only files, you can use the DELETE command (also written by Mike Johnson). SYNCHRONIZING DIRECTORIES Sometimes it is desired to synchronize directories or disk drives, not only by copying changed or new files, but by deleting files in the destination directory that don't exist in the source directory. Such conditional deletion can be done by a separate program, called DELETE, version 1.10 or later. Get the file DEL110.ZIP (or a later version) from the Colorado Catacombs BBS, 303-772-1062. ZERO LENGTH FILES Unlike XCOPY, MCP copies zero length files and, if copying subdirectories, always copies empty subdirectories. It also duplicates the file attributes (system, hidden, read only) of the source file in the destination file, except for the archive bit, which is always set in the destination file. PROMPTS There are several prompts possible in MCP. At each of the prompts, the default answer (if applicable) is indicated with a capital letter. Answers to the prompts are not case sensitive, and are all only one keystroke. Pressing "Enter" after a letter is not required. The "Enter" key is ignored at all prompts except for the "Press a key when ready to start copy . . ." prompt caused by the /W option. In addition to the listed responses at any prompt, "Esc", "Ctrl-C", and "Ctrl-Break" will terminate MCP. "Ctrl-Break" will also terminate a copy in progress, even if the program is not looking for an answer to a question. filename Y/n? This is the format used in asking if you want to copy a particular file when you put /P on the command line. "N" means that you do not want to copy the file, and most other keys (including "Y") mean that you do want to copy the file. Only 512 bytes available on A:. filename requires 1234 bytes. Retry with new disk, Try new disk later, Skip, or Cancel (r/T/s/c)? If your destination is on a fixed disk, press "S" to skip just this file or "C" to cancel and exit MCP. If your destination is a removable disk, you may skip the current file or cancel as with a fixed disk destination. You may also wish to change disks and then press "R" to retry copying the current file, or press "T" to try copying the next file (which may fit) and add the current file to a list to be tried again later (on a different floppy disk). Most other keys act the same as "T". No more room on drive A: Retry with new disk, Skip or Cancel (R/s/c)? Your destination disk has no more room on it. Change the disk and press "R" to retry, or "C" to exit the MCP program. Error writing to filename. Retry, Skip, or Cancel (r/S/c)? MCP encountered one of many possible errors (insufficient network rights, bad disk sectors, hardware failures, disk full even though it had enough room to start the copy, etc.). "R" restarts the copy from the beginning of the file. "S" skips this file and tries the next. "C" cancels the copy and exits MCP. Does destination specify a File name or Directory on the target (f=File, D=Directory)? The destination directory is not an existing directory and the name does not end with "\", and there may be more than one source file (indicated by wild cards in the name or a /S or /E switch). Press "F" if you intended that the destination is a file name, or "D" if you intended that the destination is a directory. If you decide that the command line was in error, press "Esc". Press a key when ready to start copy . . . You used the /W option. Press "Esc", "Ctrl-C", or "Ctrl-Break" if you decide you really didn't want to copy anything after all, or press any other key to start the copy process. ERROR MESSAGES No matching files found. No files matching the file specification you provided were found to copy. Check the spelling of your source file(s), the existence of those files, and the network rights pertaining to those files. Break! You pressed Ctrl-Break, Ctrl-C, or Esc to halt the program. Unable to create filename The destination file name may have been on an invalid drive, have contained invalid characters, been in the root directory with all directory entries filled, been on a network directory with insufficient rights, been too long for DOS or the network operating system to create, or some other similar problem. Files may not be copied onto themselves. The first step in copying a file is to create a new file of zero length with name of the destination file. If the source and destination files are the same, this action would destroy the source file. It is also possible to get this error message when the source or destination drive is invalid. Destination path is too long. The most likely cause of this error message is starting a recursive copy command (like MCP /S C:\*.* C:\SUBDIR\). This causes everything in the root directory of drive C: to be copied to C:\SUBDIR\ and C:\SUBDIR\SUBDIR\ and C:\SUBDIR\SUBDIR\SUBDIR\ and so on. Older versions of XCOPY allow this, the latest one does not. MCP allows the recursion to go on until the resulting path name exceeds DOS limits. This is a great way to fill up a hard disk in a hurry. Not enough memory to run MCP.EXE Try reducing the number of TSR programs, or if you are shelled out to DOS from another program, exit that other program. Access denied. DOS (or some network software) returned an error code indicating that the operation was not allowed. Some things that can do this is trying to create a directory when a file with the same name already exists or trying to write to a network directory where you have insufficient rights. Bad file number. Something strange is going on that confused DOS and/or MCP, probably some error associated with a multitasking environment. Attempt to copy more than one file to file. MCP does not concatenate files (use DOS COPY to do that), so copying more than one file to a single file means that all that ends up in the destination file is the last file copied. If this were done with the /R option, all but the last file would be destroyed. Therefore, only one file is allowed to be copied to a file. The trap that catches this is not foolproof (although it is reasonably difficult to fool), so you should still take care on the command line to avoid specifying such an action. Unable to open filename The specified file name may not be valid, or may be on a network directory where you have insufficient rights. Ran out of memory keeping track of files to retry. Each file name source and destination that is "remembered" to try later when you run out of room copying to a diskette takes up some conventional RAM. After several thousand of these (more or less, depending on how much RAM you have available), you may run out. ERRORLEVEL When running MCP in a batch file, you can test for the following values of ERRORLEVEL after MCP runs: 0 = Normal completion. 1 = No matching files found to copy. 2 = "Ctrl-Break", "Ctrl-C", or "Esc" pressed, or copy canceled with "C". 3 = Unable to write to destination file. 4 = Attempted to copy file onto itself. 5 = Destination path is too long. 6 = Not enough memory to run. 7 = Access denied. 8 = Bad file number error returned by DOS. 9 = Attempt to copy more than one file to one destination file. 11 = Command line error or help requested. 12 = Unable to open input file. 13 = Ran out of memory keeping track of files to retry. NAME TRIVIA MCP comes from M as in Master or Mike's and CP as in the name for the UNIX copy command. Call it whatever you like, by renaming it, creating an alias with DOSKEY or a similar utility, or by creating a batch file. INTEGRITY CHECKS To see if the files in this distribution have been damaged, hacked, altered, or infected since leaving the author's computer, you can check the files in this distribution with the command (note the lower case cv): MD5SUM -cv MCP.ASC This will check the files listed in MCP.ASC to see if they still have the same MD5 "fingerprints." To check that MCP.ASC hasn't been altered, you can use the Pretty Good Privacy program (PGP -- also available on the Colorado Catacombs BBS, 303-772-1062) to check the digital signature on MCP.ASC against my public key (in MPJ8.ASC). PGP MPJ8.ASC PGP MCP.ASC This may not be 100% foolproof, but it is better than the hackable "security envelopes" of PKZIP and ARJ, and it rules out the accidental mistakes, anyway. LIMITATIONS MCP does not do concatenation. It does not get the date format from the DOS country table. It does not do Japanese dates in year-month-day format. All of its error messages are in English. It does not do a full screen interface. It doesn't skip zero length files just because they are zero length. It doesn't skip creation of empty subdirectories when /S is used. /V does absolutely nothing (use the DOS command VERIFY ON before MCP for the same effect). It doesn't remove any subdirectories, nor does it preserve subdirectory attributes (like the hidden bit) when copying subdirectories. It does not delete special files (hidden, system, or read only) -- get DEL110.ZIP to do that. It does not copy to devices like LPT1 or PRN. It cannot copy from defective disk media. It doesn't predict winning lottery numbers. On the other hand, it does do some things that I always thought that XCOPY should have done. LEGAL NOTICES Copyright (C) 1992-1995 Michael Paul Johnson. All rights reserved. No warranty. All trademarks mentioned herein belong to their respective owners. This is shareware. To register, please send $15.00 (or $25.00 if you also want original disks & printed documentation; $100 for site license for unlimited use within one corporation) to: Mike Johnson PO BOX 1151 LONGMONT CO 80502-1151 USA Registration entitles you to support on the Colorado Catacombs BBS (303-772-1062) and by mail, and to notification of major upgrades at discount rates. Upgrades for registered users are free for the downloading from the Colorado Catacombs BBS, or available by mail to registered users on disk for $10. Although I try to write perfect software, there is a chance that I goofed up in some way. If you find this to be the case, please let me know so that I can repair it. Because I can't test every possible use of this software on every system that it might be run on, and because I have no control over the way shareware gets passed around, you use this software entirely at your own risk. Prices are subject to change without notice. HOW TO CONTACT THE AUTHOR 1. Leave a message at the Colorado Catacombs BBS, 303-772-1062. The latest version of this software will be posted there, as well. 2. Write to Mike Johnson, PO Box 1151, Longmont CO 80502-1151, USA. 3. Send electronic mail to CompuServe ID 71331,2332 or Internet address m.p.johnson@ieee.org. 4. Call Mike Johnson at home at 303-772-1773. VERSION HISTORY 1.00 5 Sep 92 Initial release. 1.01 7 Sep 92 Modified to allow recursive copies of hidden subdirectories. 1.02 9 Sep 92 Corrected handling of . and .. as source or destination directory name. 1.03 20 Sep 92 Added /C switch to specify overwrites of all but identical files. 1.04 22 Sep 92 Added /B switch to allow individual prompts for overwrites. 1.05 5 Oct 92 Improved safety feature that prevents copying or renaming more than one file to the same destination file. Added /J switch to allow selective copying only of files that already exist in the destination directory. 1.06 11 Dec 92 Added /T switch for better results with redirected output. 1.07 14 Dec 92 Corrected command line scanning error that sometimes caused /D switch to be falsely rejected. 1.08 6 Feb 93 Increased depth of recursion possible for better network compatibility. 1.09 31 May 93 Corrected action with /P and /R when moving to a destination on the same volume. 1.10 3 Jul 93 Added warning message and ERRORLEVEL 1 exit if no source files match the specification on the command line. 1.20 2 Oct 93 Added /I switch. 1.50 5 Feb 95 Added /D- option. Added /Ddays option. Changed support BBS name and phone number to Colorado Catacombs BBS, 303-772-1062. Added MD5SUM integrity check files to distribution archive. Changed from PostScript to Microsoft Windows Write format for distributing the manual. 1.60 16 May 95 Added /Z option. Now attempts to open files in "deny none" sharing mode, and if that doesn't work, tries to open the same file in "compatibility" sharing mode. If neither file open call works, the file is skipped. (Previous versions only tried "compatibility" sharing mode, and if that failed, exited the program instead of skipping just one file.) INVOICE Remit to: Ship to: Mike Johnson ________________________________ PO Box 1151 ________________________________ Longmont CO 80502-1151 ________________________________ USA ________________________________ Contact person: ________________________________ ________________________________ email address: ________________________________ Quantity Description Unit Price Total MCP registration with disk ________ & printed documentation. $25.00 ______ MCP single copy registration ________ only. $15.00 ______ Site license for unlimited use of MCP at one corporation (includes one disk & one ________ printed manual). $100.00 ______ Total ______ I prefer 5.25"____ 3.5"____ disks. Note that the MCP software has been delivered and accepted by the customer. Upon receipt of this paid invoice, the printed documentation and disks paid for will be sent. MCP 1.60 May 27, 1995