Clock-Watch Release 1.0
                    {UNREGISTERED SHAREWARE VERSION}
          For complete control get the latest registered version.

                      Written by Richard Sepulveda
                        Voyager BBS 415-623-0448











Clock-Watch Release 1.0 (tm)   (C)opyright 1990  RichSoft
Written by Richard Sepulveda

Disclaimer

   This  program  is  provided "as is" without warranty of  any  kind,
   either  expressed or implied,  including,  but not limited  to  the
   implied  warranties of merchantibility or fitness for a  particular
   purpose.   The entire risk as to the results and performance of the
   program  is  assumed  by  the  user.    Should  the  program  prove
   defective,  the  user  assumes  the entire cost  of  all  necessary
   servicing, repair or correction.




Introduction

   When I first began running my BBs with DESQview, I noticed  that my
   system clock was losing about an hour a day, and  on  somedays even
   more! I've made a few other attempts to  correct  this  problem but
   none worked as well as Clock-Watch.  Clock-Watch  will  update your
   system clock as necessary, and will  make the necessary changes for
   daylight savings time on the last sunday of April and October.

   Clock-Watch is  "DESQview AWARE" ,  and  will spend most of its CPU
   time trying to give away its CPU time.


Operation

   In order to run  Clock-Watch  efficently  under  DESQview  you must
   select  DV's  Open Window option and select  "AP"  Add  a  Program.
   Then select  "O"   for Add Other Program,   Then  type  in the name
   of the Directory where you placed Clock-Watch.  Now  set up Program
   and Advanced Program Options as follows:


ÉAddÍaÍProgramÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º                        Specify Program Information                     º
º                                                                        º
º Program Name ...........:  Clock-Watch                                 º
º                                                                        º
º Keys to Use on Open Menu:  C1                  Memory Size (in K)  50  º
ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ
º Program...: CLKWATCH                                                   º
º                                                                        º
º Parameters:                                                            º
º                                                                        º
º Directory.: \UTILITY     {put in your dir name}                        º
ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ
º Options:                                                               º
º                   Writes text directly to screen.........: N           º
º                   Displays graphics information..........: N           º
º                   Virtualize text/graphics (Y,N,T).......: Y           º
º                   Uses serial ports (Y,N,1,2)............: N           º
º                   Requires floppy diskette...............: N           º
º                                                                        º
º  Press F1 for advanced options             Press Ù when you are DONE  º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ




  ÉAddÍaÍProgramÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
  º              Specify Program Information Advanced Options              º
  º System Memory (in K).......: 0  Maximum Program Memory Size (in K)..:  º
  º Script Buffer Size.........:1000 Maximum Expanded Memory Size (in K):  º
  º Text Pages : 1  Graphics Pages: 0  Initial Mode:   Interrupts: 00 to FFº
  ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ
  º Window Position:                                                       º
  º   Maximum Height: 25   Starting Height:  7    Starting Row....:  1     º
  º   Maximum Width.: 80   Starting Width.: 24    Starting Coloumn: 25     º
  ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ
  º                         Shared Program                                 º
  º  Pathname...:                                                          º
  º  Data.......:                                                          º
  ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ
  º  Close on exit (Y,N,blank)......: Y Uses its own colors.............: Yº
  º  Allow Close Window command.....: N Runs in background (Y,N,blank)..: Yº
  º  Uses Math coprocessor..........: N Keyboard conflict (0-4).........: 0º
  º  Share CPU when foreground......: Y Share EGA when foreground/zoomed: Yº
  º  Can be swapped out (Y,N,blank).: N Protection level (0-3)..........: 0º
  ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

   Any fields that are blank must be left blank.



System Sharing

   When Clock-Watch is started in DESQview System Sharing (task switching)
   will be  enabled.  During  Menu operations  System Sharing is OFF,  And
   will not  be  re-engaged  until  you  have  exited the menu by pressing
   [Return] or [Esc] whichever is appropriate.

Auto-Update

   Auto-Update will also be enabled if Clock-Watch is started in DESQview.
   and can  be  toggled  on  or  off  from  the Menu.  Auto-Update enables
   Clock-Watch to  automatically  update the system clock from the Battery
   operated  (extremely acurate)  quartz unit.  If the system clock should
   differ  from  the  battery  unit by more then 2 mins Update will occur.
   During Uploads and Downloads you  will  see the clock update due to the
   time sharing problems caused by Wildcat and DESQview.

Seasonal-Update

   Seasonal-Update  will be enabled if Clock-Watch is started in DESQview,
   and  can  be  toggled  on or off  from  the Menu.  Seasonal update will
   automatically adjust system and battery unit for Day-light savings time,
   and  updates  will  take  place  at 2am on the last Sunday of April and
   October.


Menu Commands

   [Esc]  Exits program and returns to DOS.
   [A]    Toggles Auto-Update on or off.
   [S]    Toggles Seasonal Update on or off.
   [C]    Selects Clock-Functions  (sets time,date,and alarm)

Clock Functions

   [PgUp][PgDn]  moves cursor to next or previous field.
   left arrow and right arrow will update field
   press [Esc] to end Clock functions.


To order registered version:
Send $15.00 in check or money order to:

                        Richard Sepulveda
                        c/o RichSoft
                        PO Box 7298
                        Fremont, CA  94537-7298

If you liked this version you'll love the registered stuff!!!!!!!!!!


Now place Clock-Watch in the Background and let it run...........
Information and suggestions can be obtained from Voyager BBs 415-623-0448
Leave a message for SysOp..........