Upgrading from v4.1x and v4.20 to v4.21
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    Upgrading from previous version is simple, you can replace the
    following     files with the new ones

        TM.EXE          the main program
        TM.OVL          the main program (overlay)
        TM.RES          the resource file
        TM.HLP          the help file
        TMS.EXE         the script compiler
        TMINST.EXE      the installation program
        TMSTAT.EXE      the statistic program
        TMPHONE.EXE     the phone maintenance utility
        HOST.EXE        the self-extract host scripts
        TOOLBOX.EXE     the self-extract toolbox scripts

    There is no change in the configuration file format.
    Note: DO NOT change the version number in TM.CFG. It should read
          4.11 even you are running 4.21.


Upgrading from v3.xx and v4.00 to v4.21
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    To upgrade from v3.xx and 4.00, you can replace the following files
    with the new ones

        TM.EXE          the main program
        TM.OVL          the main program (overlay)
        TM.RES          the resource file
        TM.HLP          the help file
        TMS.EXE         the script compiler
        TMINST.EXE      the installation program
        TMSTAT.EXE      the statistic program
        TMPHONE.EXE     the phone maintenance utility
        HOST.EXE        the self-extract host scripts
        TOOLBOX.EXE     the self-extract toolbox scripts

    Then run "UPGRADE TM.CFG" to upgrade your configuration file to the
    new format.



Upgrading from v2.xx to v4.21
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

    This upgrade procesure assumes that you have Telemate already installed
    in the directory \TM,

    1. Before you do anything, MAKE A BACKUP of the \TM directory. You WILL
       NEED some files from it later.
    2. Copy all files (or extract them from the .ZIP) to \TM. You can
       overwrite all the files.
    3. Copy the TM.CFG from your backup to \TM and at the DOS prompt run
       "UPGRADE TM.CFG".
    4. Copy the TM.FON and TM.MEM from your backup to \TM.
    5. Delete all *.TMS files.
    6. Run TMINST.EXE to check if all the options are setup correctly.
    7. If you are using the HOST script, you can run HOST.EXE to extract
       the host script, copy the HUSER.HST from the backup to \TM and
       then run the script HCONFIG.SCR to setup the host mode.

    If you want to install v4.11 in a different directory, say C:\TM4,

    1. Copy all the files (or extract them from .ZIP) to C:\TM4.
    2. Copy the TM.CFG from \TM to C:\TM4 and at the DOS prompt run
       "UPGRADE TM.CFG".
    3. Edit TM.CFG and changes the lines to
           DirTelemate="C:\TM4\"
           DirScript="C:\TM4\"
       * It is VERY IMPORTANT that you have the directory set up correctly.
         Otherwise, Telemate will not run.
    4. Edit your AUTOEXEC.BAT and change (or add) the line
           SET TMCFG=C:\TM4\TM.CFG
    5. Copy the TM.FON and TM.MEM from \TM to C:\TM4.
    6. Run TMINST.EXE to check if all the options are setup correctly.

    Notes:
    1. The new *.MAC and *.PAD are not compatible with the old ones. You
       will have to set up your macro again.
    2. If you are using a 101-key keyboard, you should turn ON the 'Enhanced
       Keyboard' option under the Options/Mouse & Keyboard dialog.
    3. The VT102 keypad table is changed in order to emulate the actual
       terminal more accurately. Please refer to Appendix B in the file
       TELEMATE.DOC for details on the keyboard assignment.