USING TELIX 3.21 WITH EXTERNAL HS/LINK
                                  
     Installation: 

     Please refer to the TELIX manual for detailed information on
     installation of external protocols.  The following installation
     steps should work for most folks:

     Copy the provided HS-D.BAT and HS-U.BAT files, as well as
     HSLINK.EXE into your TELIX directory, or into a directory included
     in your search PATH.

     You can edit HS-D.BAT and HS-U.BAT to include options on the HSLINK
     command line, but most folks won't need to change anything.  If you
     want to experiment, there are a number of optional parameters you
     can read about in HSLINK.DOC and HSLINK.NEW.

     Next you need to install the HS/LINK protocol into the TELIX
     protocol menu.

     Load up TELIX and press ALT-O to get into the CONFIGURE menu.  Then
     cursor down to the PROTOCOL OPTIONS selection and press ENTER.  In
     this screen, you press A (B, or C if you already have other
     external protocols configured).

     When asked for "KEY" enter "H".

     When asked for "PROTOCOL NAME" enter "HS/Link".

     When asked for "UPLOAD FILENAME" enter "@HS-U".

     When asked for "DOWNLOAD FILENAME" enter "HS-D".

     When asked for "BAT or SCRIPT" select "BATCH FILE".

     When asked "Should TELIX ask for filenames on download?" say "NO".

     When asked for "Trigger String" enter "HS*R".  The fourth
     character is a control-B, which you enter by holding CTRL and
     tapping the B key.  It should show up on the screen as a white
     happy face.

     Then press ENTER to get out of this screen and cursor down to
     "WRITE SETUP TO DISK" and press ENTER to save your changes.

     To download with HS/LINK, first you tell the BBS you're talking to
     what files you want to download, and that you want to download in
     the HS/LINK protocol.  On the Tool Shop you can do this with the
     following command:
        D H filename filename S
     for example,
        D H TOOLSHOP.EXE S

     Once you've got the BBS into downloading mode, TELIX will
     automatically detect HS/Link and launch it for you.

     If you want to also upload to the BBS while downloading, you simply
     STOP SHORT of pressing the final ENTER key to begin a download, and
     instead press the PGUP key, select HS/LINK from the menu, tag the
     upload filenames you want to have transmitted and hit F10 to UPLOAD.

I hope these instructions help, but remember, I can't take
responsibility for anydamages resulting from these instructions.  If you
get stuck, it always helps to read the DOC files that come with TELIX
and with HSLINK.  If all else fails, call up the tool shop and ask for
help on the main board.  Either I will help you, or somebody else will
know the answer and give you a hand.

Good luck!

Samuel H. Smith
Sysop of The Tool Shop
   Phone number         Modem type                Access
  --------------    ---------------------   -------------------
  (818) 891-3772    US Robotics HST 9600    Contributors only
  (818) 891-1344    v.32bis 14400           Contributors only
  (818) 891-6780    v.32bis 14400           Free to all