; ---------------------------------------------------------------------
;              English language text file for KSP-TLNT v5.0
; ---------------------------------------------------------------------
; 
; IMPORTANT: 
;
;	Make this file read-only if you have a multi-node BBS!
;	Lines beginning with a semicolon are comments and are ignored.
;	Do not rearrange the order of these lines, other than to
;		insert or remove comment lines.
;	Do not remove or modify any substring that begins with '%'!
;		(They are replaced at runtime by computed values.)
;	Some lines below may begin or end with a space which should
;		be preserved.
;
; "Escapes" are replaced as follows:
;
; 	\r 	carriage return
;	\n	line feed
;	\7	rings the bell
;	\t	horizontal tab
;
\r\nConnection closed by remote host.\r\n
\rAscii mode will now be the default.\r\n
\rBinary mode will now be the default.\r\n
Telnet requires 8N1 communication
Baud rate below minimum required: %ld!\r\n
You have %u minutes remaining.\r\n\n
\r\n*** Can't find %s - Using local console. ***\7\r\n
Can't read file
Can't close file
No time remaining
Telnet hours of operation are %s\r\n
\r\nLicense limit(s) exceeded - try again later.\r\n
\r\nCarrier Lost!\7\r\n
\r\nInactive Timeout!\7\r\n
\r\nBBS Time Expired!\7\r\n
\r\nTelnet Internal Error!\7\r\n
Returning to BBS.\r\n
Hanging up!\r\n
Closing connection to %s 
 [done]\r\n
Connection to %s terminated.\r\n
Enter Remote Host ID: 
Invalid IP address!\7\r\n
Looking up '%s' 
 [failed!]\7\r\n
Trying %s (port %d) 
\r\nConnected to %s.\r\n
 [Timed out!]\7\r\n
 [Closed by remote host]\r\n
 [User Abort!]\7\r\n
Not a valid hostname or IP address!\7\r\n
To return to the Telnet menu while in\r\n
Ascii mode: Press '^%c' or send "Break".\r\n
Binary (or Ascii) mode: Send "Break".\r\n
Telnet option negotiation %s be displayed.\r\n
XON/XOFF flow control is now ENABLED.\r\n
XON/XOFF flow control is now DISABLED.\r\n
Automatic Z-Modem recognition is ENABLED.\r\n
Automatic Z-Modem recognition is DISABLED.\r\n
Enter new terminal type: 
Control keys (may be abbreviated):
abort all output
erase current line
escape to command mode
are you there?
interrupt process
erase previous character
display this help
Commands (may be abbreviated):
enable ascii (not binary) mode
enable binary (not ascii) mode
close current connection
toggle xon/xoff flow control
upload/download files via ftp
quit telnet and logout from BBS
connect to a remote host
toggle option negotiation display
quit telnet and return to BBS
resume current connection
set control key mappings
show control key mappings
set terminal type
toggle zmodem recognition
display this help
\r\nOptions:
Enter new control key for %s: 
Duplicates another key setting!\7\r\n
Must be a control key!\7\r\n
Can't use ^M (CR), ^J (LF), or ^X (ZDLE)!\7\r\n
 min. left) 
closed
All access to this host has been blocked\n
Requesting true hostname
; -----------------[ End of file ]----------------------------