WARNING: This document is subject to change at any time. Any changes made will be indicated by a vertical bar (|) in column 1 of the file. | Last update: 04/27/93 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= The following is the standard message header (128 byte block) with only slight modifications: typedef struct { char Status; bassngl MsgNumber; bassngl RefNumber; char NumBlocks; <- see bit #7 of ExtendedStatus char Date[8]; char Time[5]; char ToField[25]; bassngl ReplyDate; char ReplyTime[5]; char ReplyStatus; char FromField[25]; char SubjField[25]; char Password[12]; char ActiveFlag; char EchoFlag; char Reserved1[4]; <- reserved was 6 bytes char ExtendedStatus; <- new byte - 0 for compatibility, accept 32 also char Reserved2; <- last of original reserved bytes } msgheadertype; The message base format remains almost 100% identical to the PCBoard v14.x standard. In fact, it remains 100% compatible having just one byte different, which was not previously used by PCBoard. The byte at offset 126 (i.e. the 127th byte of the 128 byte header) has a new function. It is now used to indicate that extended header information will be found in the body of the message. The byte, referenced as ExtendedStatus above, will contain a 0 by default to indicate that no extended header information is available. A value of 32 will also be accepted to indicate the same thing since some programs may be placing a space instead of a null character in the reserved byte(s). If ExtendedStatus is not equal to 0 or 32 then it is assumed that extended header information is available, however, a follow-up check of the message body will determine the true existence, or lack thereof, of such information. For speed purposes, ExtendedStatus will be divided into 'bits' as follows: bit 0 = extended header has TO information bit 1 = extended header has FROM information bit 2 = extended header has SUBJECT information bit 3 = extended header has CARBON LIST TO information bit 4 = extended header has ATTACHED FILE information bit 5 = ignore - this bit is equal to decimal 32 bit 6 = extended header has either REQRR or ACKRR information bit 7 = reserved for future use Bit 6 indicates that either an REQRR (request return receipt) or an ACKRR (acknowledge return receipt) extended header is in the message. The following structure will be used within the contents of a message body whenever an extended header is to be included: typedef struct { int Ident; 16639 (40FF hex) | char Function[7]; TO,TO2,FROM,FROM2,SUBJECT,ATTACH,LIST,ROUTE,ORIGIN,REQRR,ACKRR,ACKNAME,PACKOUT char Colon; always set to ":" char Descript[60]; user name, subject, filename char Status; NONE, READ (if LIST) char CarReturn; 0xE3 or 0x0D } msgextendtype; There can be as many extended headers as desired. In fact, no headers at all is possible even though the ExtendedStatus from the message header told PCBoard to expect to find one. This, of course, has a negative impact on efficiency (don't set the flag unless you really intend to put an extended header in the body of the message) but maintains complete compatibility with previous versions of PCBoard which totally ignored the values found where the ExtendedStatus byte is now located. The first field, Ident, serves to indicate that a truly valid header is about to follow. Ident is an integer value of 40FFh. Stored in the file it is seen as an ascii 255 character followed by an @ character. Older software will not expect this extended header to be in there and will display the header to the user. The format of the information, however, is such that it will be meaningful, albeit, somewhat annoying to see. | The function of the header is written in english. Right now the following | are valid values for PCBoard: "TO ", "TO2 ", "FROM ", "FROM2 ", | "SUBJECT", "ATTACH ", "LIST ", "ROUTE ", "ORIGIN ", "REQRR ", "ACKRR ", | "ACKNAME" and "PACKOUT". Any other values are permissable but will be | ignored by PCBoard v15.0 unless and until future updates to PCBoard add | new-standards. The next character in the header is a colon which is then followed by the appropriate text for the header. For example, the header might be structured like this: <255><@>SUBJECT:any subject you wish to put here, up to 60 characters Notice how an older program, which is not PCB v15.0-aware, will still display something intelligible to the user who is reading the message. Because the entire text is in english the user will be faced with extra information that is not utilized by the software he is using, but at the same time, the extra information does not make his software incompatible or unusable. This protects the user's investment in software and time, especially if the author is no longer supporting the program, or the user does not have time to switch programs or upgrade to a newer package which may have more bells and whistles than he cares to learn. Of course, older packages will not be able to take advantage of the added functionality since the header information will be very difficult to enter properly via the keyboard. So, while remaining compatible with older software, to take advantage of the new features a user will still have to upgrade to a newer release of the package. The text for the header may be up to 60 bytes long. If the Function is set to "TO" then the header indicates a longer, or alternate, name should be used when displaying the TO: field of the message. If the Function is set to "LIST" then the header indicates the name of ONE of the users who is to receive the message. There may be more than one "LIST" header, in fact, it is expected that any time you create a carbon copy list you will be sending the message to two or more users. If the Function is set to "FROM" then it indicates a longer, or alternate, name should be displayed for the FROM: field. If set to "SUBJECT" then a longer, or alternate, subject is displayed. If set to "ATTACH" then the description field indicates the name of the attached file. If set to ROUTE then message routing information (for netmail transfers) will be included. If set to ORIGIN then the origin of the message (for netmail transfers) will be included. If set to REQRR then PCBoard will generate a Return Receipt when the user reads the message online. Mail Doors will need to be enhanced to perform the same functionaility. If set to ACKRR this will indicate that an acknowledgement to the Return Receipt is contained in the message. One additional header, the ACKNAME, will be included with ACKRR to complete the acknowledgement. The next byte is the extended header status byte. To help guarantee that the header is valid, there are only three possible values for this field. They are: 'N', and 'R'. These values are used as follows: 'N' indicates that there is no status - it is used just for verification 'R' indicates that a user in a CARBON COPY LIST has read the message The 'R' allows PCBPack to determine when all intended recepients have read the message. Each user is listed in a separate header and each user therefore has a separate status byte to indicate when it has been read. Once all users have read the message it may then be deleted. Finally, the CarReturn byte is set to E3 hex. This is the same character that is normally used by PCBoard to indicate the end of a line. By terminating the header in this manner all non-v15.0-aware packages will be able to properly display the entire header in a legible form. The 0D hex value is used by foreign systems (such as the Chinese version of PCBoard) in place of E3. This is because E3 interferes with the double-byte character system used by these countries. Remember too, that other systems/software could pass other values through the extended header field. PCBoard v15.0 will ignore (and not display) any extended headers it does not understand. Thus, if an offline reader were to pass additional information into the message base it would be posted and downloaded through any of the existing mail doors. The downloader then, having access to an updated reader, could take advantage of the additional information that was passed to it. For instance, a header of "GIF" might be passed as well as a filename. If the door were updated to know that it should send the attached file too then the offline reader could use the extended header "GIF" to know that it can display the file to the caller. Possibilities are limitless. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= he following outlines implementation details of the new system, covering ach of the headers supported by PCBoard v15.0: -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= FROM ---- For v15.0, this field allows a name that is longer than 25 characters to be | stored in the message. In order to ENTER a name that is longer than 25 | characters, however, the conference must have the "Allow Internet TO: Names" | switch enabled. Of course, the only way to edit the FROM field is to use | the (E)dit Header command. If the message header FROM field is blank (all spaces) then PCBoard will display only the extended header FROM field. If the message header FROM field is not blank, then PCBoard will display the extended header FROM field, then a comma, then the message header FROM field. | FROM2 | ----- | This field is only expected to exist if the FROM field is utilized first. | It allows another 60 characters to be used for the FROM field. PCBoard will | automatically piece together the two FROM/FROM2 fields and will perform any | wrapping on screen as necessary. TO -- For v15.0, this field allows a name that is longer than 25 characters to be stored in the message. PCBoard only allows a caller to type in a TO name longer than 25 characters if Internet style (long) addresses are enabled via PCBSetup. This is done on a per-conference basis. If the message header TO field is blank (all spaces) then PCBoard will display only the extended header TO field. If the message header TO field is not blank, then PCBoard will display first the extended header TO field, then a comma, then the message header TO field. | TO2 | --- | This field is only expected to exist if the TO field is utilized first. | It allows another 60 characters to be used for the TO field. PCBoard will | automatically piece together the two TO/TO2 fields and will perform any | wrapping on screen as necessary. SUBJECT ------- If an alternate subject is supplied it will be displayed in the message header instead of the 25-character subject found in the main header. If the caller replies to the message the alternate subject is automatically carried forward. ATTACH ------ When saving the message the caller may attach a file by uploading it while in the editor. PCBoard will use standard file transfer protocols to receive the file. The filename will be stored in the header. NO PATH information will be included. PCBoard must be configured with each conference set to a separate file attachment subdirectory. By not including the path information in the header, the files may be moved simply by changing the PCBoard configuration. If a user reads the message through PCBoard he will be prompted to download the attached file. If the user downloads the message through an offline mail reader then it is up to the mail door author to provide options for 'always' downloading the file, 'never' downloading the file, or provide the ability to call back later to pick the file up. The "Descript" field of the extended header will be formatted as follows: FILENAME.EXT (FILESIZE) UNIQUE.### The first filename is the actual name of the file that is being attached. The file size is the proper size of the file. The unique filename is the name which is used to STORE the file on disk. Because of the possibility of more than one message having the same name for a file attachment, it is necessary to use a unique storage name. PCBoard will display only the first filename and size to the caller. But when the caller downloads the file, PCBoard will have to copy the stored name to the proper filename first, then perform the file transfer. PCBoard has implemented the unique filename by simply taking the original filename and changing the extension to ".000" for the first file by that name, ".001" for the second, ".002" for the third and so on. In other words, when a caller uploads an attached file, PCBoard will check for any previously existing "FILENAME.000" file. If one is found, then it will check for a "FILENAME.001" file and so on until a unique name can be posted. For offline mail doors, the door software will have to perform the same operation as PCBoard - ensuring that the file is posted in the proper directory and that it has a unique name. The extended header MAY need to be updated before posting the message in the message base! LIST ---- When writing a message it can sometimes be advantageous to send a single message to two or more individuals without: 1) making the message public, or 2) making separate copies of the message for each recipient. When addressing the message the caller may indicate, by typing 'LIST' in the TO: field, that he or she desires that PCBoard prompt for a list of names to store in the extended header. Each name entered is acted upon similar to the TO field described above. Each name is stored in its own unique header with an initial Status byte of 'N'. The message will be viewable only to those in the list and the sysop. As each intended recipient reads the message the Status byte for the appropriate extended header will be changed to an 'R'. WARNING: Older mail doors will not know to set this byte. The message could, in fact, be read by all users in the list, but not be flagged as having be read by all, unless the mail door(s) in use are properly updated to perform this function. This merely means that PCBPack will not know to delete the message by seeing if the message has been read. Instead, it will have to remove the message based on age or message number limits as set by the sysop. ROUTE ----- PCBoard can prompt a caller for routing information if the sysop has configured it to do so. A NETMAIL system that receives the message should verify that it was intended for the BBS that received it. If the caller is replying to a message then ROUTE automatically receives the contents of the ORIGIN field, if one exists, and the caller is not prompted to enter the routing information. ORIGIN ------ This field is filled in by PCBoard using a default specified in the PCBoard configuration IF the sysop has configured it to do so. If an ORIGIN field is found, the NETMAIL software that is exporting the message may accept the default or it may modify it in a manner that is compatible with the NETMAIL package in case it is different from that used by PCBoard. The default ORIGIN field will be straight text which simply identifies the BBS system. This is similar to the method used by PCRELAY software which uses a 7 (or is it 8?) character name to indicate the origin. The length allowed by PCBoard for the ORIGIN line is the full 60 character limit of the extended header. To reiterate: This scheme need not be used by the NETMAIL software. The ORIGIN field may be replaced with one that is compatible with the NETMAIL software being used to echo a particular conference. HOWEVER, where multiple netmail systems share a single conference it is highly desireable that the NETMAIL software be written to keep the origin intact and use some type of look-up table to determine any other necessary information. REQRR ----- This packet indicates that the caller is requesting that a return receipt message be generated as soon as the message is received by the addressee. If the caller reads the message online (via PCBoard) then PCBoard will immediately generate a return message addressed to the TO field. It will also use the extended header TO, SUBJECT, and ORIGIN information to get the message back to the originator. The message generated will include an ACKRR to indicate that it is an acknowledgement. No other information will be in the body of the message. The "Descript" field of the extended header, when generated by PCBoard, will say "Caller has requested a Return Receipt". This will allow those using incompatible software to at least understand what is happening. PCBoard, when displaying the message to the caller, will indicate at the bottom of the message that the sender has requested a Return Receipt. If this is the first time the message has been read then it will also indicate that the Return Receipt is being generated right then. ACKRR ----- When a caller views an ACKRR message online (via PCBoard), PCBoard will use the current language (pcbtext file) to display the acknowledgement to the caller appropriately. No other information in the body of the message will be shown to the caller. The "Descript" field of the extended header will be formatted as follows: "Acknowledge Receipt of msg ###### written on ##/##/## ##:##" PCBoard will read the Descript field and parse out the written on ##/##/## ##:## information. If the reply message number is 0 then it will also use the "msg #####" portion. Then, using the pcbtext file, it will display an appropriate message to the caller to indicate that the message he or she wrote on MM/DD/YY at HH:MM has been received. The FROM field of the message header will say "RETURN RECEIPT". An ACKNAME header will will be included in to indicate the actual name of the caller having received the message. ACKNAME ------- This field is used in conjuction with ACKRR to indicate the name of the user that received the message. PACKOUT ------- This field holds a date in the form MM/DD/YY which specifies the date for when a message should be packed out. As long as the message has not been killed, the message will remain in the message base until that date. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= uestion and Answer Section -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Q: With the long name and subject fields possible, what is going to happen to the header display in PCBoard when reading messages? A: The following is the proposed header display format: Date: 10-01-92 (01:01) Number: 1100 of 1200 (Refer 1050) To: A very long name can be used here, ACCOUNT NAME From: From another long named user, ACCOUNT NAME Subj: A very long subject - mixed case is possible throughout Read: 08-15-92 (17:10) Status: PUBLIC MESSAGE / FILE / LIST Conf: MAIN BOARD (0) Read Type: GENERAL (+) The above example shows what a header might look like if the TO, FROM and SUBJECT fields were all replaced with extended header information. It also shows what the header would look like if a file were attached and the message were addressed to a list of users (carbon copy list). Q: Where will attached files be stored? A: Each conference can be configured with a unique subdirectory for storing attached files. The subdirectory need not be included in the DLPATH.LST file since PCBoard will be able to locate the file attachment. However, it may be included in the DLPATH.LST if you want others, who are not reading the message, to be able to download the file if they know the name. Q: Will the full path of the attached file be stored in the message header? A: No. By storing only the name of the file, the sysop may change the configuration at any time without having to process the message base to make the change. In other words, the sysop could move attached files from one drive to another with a simple change in configuration. Q: Will protocol transfers be allowed for attached uploads? How about the message text itself? A: Yes to both questions. The user can upload message text using a transfer protocol other than ASCII. If the message is to be saved with an attached file then the caller will be prompted for the upload and, again, a protocol transfer will take place.