OpenCP command line help

Usage: cp [<options>]* [@<playlist>]* [<modulename>]* 

Options:

-h                : show this help
-c<name>          : use specific configuration
-m                : use hercules card for display (if present)
-f : fileselector settings
     r[0|1]       : remove played files from module list
     o[0|1]       : don't scramble module list order
     l[0|1]       : loop modules
-v : sound settings
     a{0..800}    : set amplification
     v{0..100}    : set volume
     b{-100..100} : set balance
     p{-100..100} : set panning
     r{-100..100} : set reverb
     c{-100..100} : set chorus
     s{0|1}       : set surround
     f{0..2}      : set filter (0=off, 1=AOI, 2=FOI)
-s : device settings
     p<name>      : use specific player device
     s<name>      : use specific sampler device
     w<name>      : use specific wavetable device
     r{0..64000}  : sample at specific rate
     8            : play/sample/mix as 8bit
     m            : play/sample/mix mono

Example : cp -fl0,r1 -va80,p50,f2 -spdevpdisk -sr48000 ftstar.xm
          (for nice HD rendering of modules)