ÛÛÛÛÛÛÛ» ÛÛÛÛÛÛÛ» ÛÛ» ÛÛ» ÛÛ» ÛÛ» ÛÛ» ÛÛÛÛÛÛ» ÛÛÉÍÍÍͼ ÛÛÉÍÍÍͼ ÛÛÛº ÛÛº ÛÛº ÛÛº ÛÛº ÛÛÉÍÍÍÛÛ» Release ÛÛÛÛÛÛÛ» ÛÛÛÛÛ» ÈÛÛº ÛÛÛÛÛÛÛº ÛÛÛÛÛÛÛº ÛÛº ÛÛº Notes Version 1.2 ÈÍÍÍÍÛÛº ÛÛÉÍͼ ÛÛº ÈÍÍÍÍÛÛº ÈÍÍÍÍÛÛº ÛÛº ÛÛº ----------------------- ÛÛÛÛÛÛÛº ÛÛÛÛÛÛÛ» ÛÛº ÛÛº ÛÛº ÈÛÛÛÛÛÛɼ ÈÍÍÍÍÍͼ ÈÍÍÍÍÍͼ Èͼ Èͼ Èͼ ÈÍÍÍÍͼ ----Table of Contents---------------------------------------------------------------------------- 1. Installing Drivers Manually. 2. Changing configuration of the SE1440 3. Instructions for using the Hot Key Mixer Control TSR 4. Notes on Device Drivers 5. Technical Support -------------------------------------------------------------------------------- 1. Installing the Drivers Manually ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For Users with Microsoft Windows: --------------------------------- 1. Start Windows as you normally would. 2. From the Program Manager Main Menu, select FILE, then RUN. 3. Type in A:\SETUP (or B:\SETUP) For Users WITHOUT Microsoft Windows ----------------------------------- 1. From the DOS prompt, type in A:\INSTALL (or B:\INSTALL) 2. Changing configuration of the SE1440 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The best way to change configuration of the SE1400 is by using the utility CSACSET. Other options are available for Windows configuration. Use the 'Drivers' icon in the control panel and select the following: Crystal External MIDI Driver Crystal OPL3 MIDI Driver CS31BA11 Business Audio, WSS 2.0 Enhanced The MIDI Mapper is modified by selecting the 'MIDI Mapper' icon in the control panel. 3. Hot Key Mixer Control TSR ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1.1 CSACHMX1.COM CSACHMX1.COM is a resident DOS utility to control the SBPro Master, FM, and Voice volumes and muting. The utility is loaded at the DOS command line and functions according to the following rules: - works in WSS and SBPro modes - works with most games - turns off when Microsoft Windows is running - will not run in a Microsoft Windows DOS box - requires CS4231 hardware - works with OTI929 if present 1.2 Volume Controls Changes to SB controls are made by monitoring the use of the following key sequences: ALT + Gray Page Up or Page Down (Scan codes E049h and E051h): - increment SBPro master volume louder and softer, respectively; which corresponds to incrementing both FM and Voice simultaneously. ALT + Gray Home or End (Scan codes E047h and E04Fh): - increment FM volume louder and softer, respectively. ALT + Gray Insert or Delete (Scan codes E052h and E053h): - increment Voice volume louder and softer, respectively. Scroll Lock (Scan code 46h): - toggles the mute bits for FM and Voice simultaneously, and it also updates the ROM BIOS variable at 417h which keeps the keyboard LED updated automatically. The keystrokes cause the update of the memory and hardware associated with each function and then they are discarded. The gray keys exist only on the keyboards with 101/102 or more keys and are usually located in between the regular keys and the numeric keypad. These keys are functionally duplicated by the keys on the numeric keypad, and therefore should not be missed. 1.3 Mixer Remapping This version supports remapping of the FM channel to aux1, aux2, or Line. This may also be changed in the resident utility. Syntax is: /F[M]=<1, 2, L> Default is L. Display of the 4231 indirect registers on the color or monochrome screens. These are updated 18 times per second (every 55ms). /D[1 2 3 4][M] 1,2,3, or 4 specify the level of display 1=CS4231 indirect regs only (Default) 2=1 + direct regs R0-R2 3=2 + MC regs MC1-MC7 4=3 + SB mixer regs 4h,Ah,Ch,Eh,22h,26h,28h,2Eh M for monochrome display. Default is color. Note: Brackets ([]) indicate optional parameters. Less than/greater than signs (<>) indicate choice of one. 1.4 Interrupts The following interrupts are hooked by this utility: 09h (low level keyboard) - monitors to detect specific keystrokes. 1Ch (system timer tick chain) - monitors to re-acquire keyboard interrupt 09h. 2Fh (multiplex) - uses 1605h and 1606h to detect Windows startup and exit; - uses 1600h to check if Microsoft Windows is already running; - uses 4231h to check if the Mixer is already installed; and - uses 4232h and 4233h to control the on and off functions of the Mixer. 1.5 Messages 1) The version number are displayed when the program starts: 2) The following messages are displayed when the appropriate hardware is detected: CS4231 detected. 3) The following messages are displayed when the appropriate hardware is not detected: Error: CS4231 not detected. 4) The following messages are displayed when no input is given: Voice Loud/Soft = Gray Ins/Del FM Loud/Soft = Gray Home/End Master Loud/Soft = Gray PgUp/PgDn Mute On/Off = Scroll Lock 5) The following message is displayed when the program is installed into memory: CS4231 Mixer is installed. 6) The following message is displayed when the TSR is removed from memory: CS4231 Mixer is un-installed. 7) The following message is displayed when the TSR is enabled or to show status: CS4231 Mixer is enabled. 8) The following message is displayed when the TSR is disabled with an off command: CS4231 Mixer is disabled. 9) The following message is displayed when the user attempts to install the program the second time: CS4231 Mixer is already installed. 10) The following message is displayed when a syntax error is made: Syntax: Program name [/[ON, OFF, or U]] 11) The following message is displayed when the user attempts to install the program while Microsoft Windows is running: Error: Program cannot be run in Windows. 12) The following message is displayed when the user attempts an operation that cannot be performed: Error: cannot complete operation. (that is, the TSR cannot be removed from memory because another TSR that uses one or more of the same interrupts has been installed afterward.) 4. Device Drivers ~~~~~~~~~~~~~~~~~~ 2.1 Drivers The driver set consists of the following: CS31BA11.DRV - WAVE IN, WAVE OUT, AUX, and MIXER Drivers 2.2 Game Mode Volume Control Hot Keys Master volume control hot keys are available when playing a game in a DOS window. "Ctrl-Alt-Page Up" and "Ctrl-Alt-Page Down" adjust the volume of both the digital wave data and also the FM synth. On AT style keyboards, the function is performed by the "Page Up" and "Page Down" keys not on the number keypad. 2.3 Full Duplex DMA Channel Configuration Windows Sound System compatible hardware limits DMA channel selection to the following: ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Play Channel ³ Capture Channel º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º 1 ³ 0 º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º 0 ³ 1 º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º 3 ³ 0 º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ It is possible to select other full duplex combinations with the CS31BA11.DRV configuration dialog box. However, the driver will not load the next time Windows is booted. 5. Technical Support ~~~~~~~~~~~~~~~~~~~~ If you need technical support for your Boca Research Product, You should first contact your dealer. The Dealer is most familiar with your system and is the primary contact for technical questions. In addition, Boca Research offers several levels of technical support: 1. Our QuickFax service contains product information, technical specifications, and helpful installation hints. From the phone attached to your fax machine, dial 407-995-9456 24 hours a day and follow the voice prompts. 2. Our Bulletin Board Service is also available 24 hours a day at 407-241-1601. The latest drivers and software are available here, as well as technical hints and product information. 3. If you subscribe to CompuServe, you can "GO BOCA" to access the latest drivers and software for our products. 4. For immediate access to a highly trained technician, our priority support service can be reached by dialing 1-900-555-4900 between the hours of 8 AM and 8 PM Eastern Time, Monday through Friday. The charge for this call is $2 per minute. If 900 service is not available in your area, call 407-997-9072. The charge for this call is $25 per incident. 5. For direct questions about specific products, our technical support department can be reached at 407-241-8088 between the hours of 8 AM and 6:30 PM Eastern Time, Monday through Friday. Please have your computer case open with the product installed when you call.