OPTi 82C930 SOFTWARE LATEST INFORMATION DOS/Window95 Utilities and Driver Version v4.00.23, 03/20/96 !!! Note: For Window 95 users, please Install Windows 95 Driver first. Read the README.W95 for the installation guide. !!! 0) What's NEW in this release The new release contains: 1) There is no LINEINGAIN or MICOUTGAIN in sound16.cfg. LINELEFT, LINERIGHT, MICLEFT and MICRIGHT will replace them. 2) Use VOLUMEPAGE=NO in [OPTION] of sound16.cfg to disable volume page. That means there is no way to run the following command. SNDINIT /v And the volume button at Hardware setup page of SNDINIT.EXE is not available, either. 1) SOFTWARE PACKAGE CONTENTS The 82C930 software package contains (1) 3.5" 1.44M diskette. - This is the DOS plus Win95 installation diskette The Install program will copy the following subdirectories and files in your destination directory: a.) Installation files - INSTALL.COM - Installation Bring-up program (in diskette only. won't be copied into HD) - SNDINIT.EXE - INSTALL Main Program - INSTALL.DAT - on-line help text file - CDROM.CFG - CDROM Config File - README.TXT - This file - SOUND16.CFG - Device Configuration File - LOGO.BMP - Company Logo BMP File b.) DOS Drivers & Files - SNDINIT.EXE - also used as Audio Device Config/Test Program - VOLUME.BAT - DOS Volume Setup Program - VOLTSR.EXE - Volume Control DOS Hotkey Program - KARAOKE.EXE - DOS Karaoke Control Program - CDSETUP.SYS - CD-ROM setup device driver - DEMO8.WAV - 8-bit Wave audio file - DEMO16.WAV - 16-bit Wave audio file - SOUND16.CFG - Device Configuration file - xxxx.SYS - CD-ROM drivers Besides, you may get other Audio Applications from your Sound Card Manufacturer. Most likely, they will install their Audio Applications through this INSTALL package as well. 2) INSTALLATION PROCESS During the installation of 82C930 Windows 95 driver, the installation program will insert a line in AUTOEXEC.BAT to invoke the SND4DOS program to install the 82c930 DOS driver. After installed the Windows 95 driver, the Windows 95 asks for a reboot to make the new hardware (in this case, sound device) to work properly. After reboot, the SND4DOS will be invoked and bring up the DOS driver installation program (install.com on the installation disk ) to install the DOS driver and remove the line SND4DOS inserted in AUTOEXEC.BAT. Please follow the following procedure to install the software: 1. Follow the installation guideline provided with 930 Windows 95 driver to install the Windows 95 driver. 2. During the first reboot after installed the 930 Windows 95 driver, the program SND4DOS will take over. Just follow the instrution of SND4DOS to bring OPTi DOS Installer to setup the Sound Card for your Windows 95 real DOS environment. !! If you decide not to install at current time, you always have a chance to re-setup your sound card support for DOS later. Just type C:\SND4DOS at your Real Mode DOS Prompt. INSTALL.COM and SNDINIT.EXE will do the followings for you: a.) Create the directory \OPTI930 (assuming: default) in your hard disk drive. b.) Prompt you for CD-ROM and sound card options so that after you have finished the installation and have rebooted your machine, you will be ready to use the sound card. c.) Copy the files with INSTALL.COM to the OPTI930 directory and Windows directory respectively if you set "WIN31" and "WINAPP" in DISK1 file to be "YES". If not, only the DOS-related files will be copied to OPTI930 directory. d.) Update your CONFIG.SYS, AUTOEXEC.BAT and SYSTEM.INI files In CONFIG.SYS, the following will be added: - DEVICE=C:\OPTI930\CDSETUP.SYS /T:S /P:340 (assuming SONY CD-ROM) DEVICE=C:\OPTI930\SLCD.SYS /D:MSCD000 /B:340 In AUTOEXEC.BAT: - PATH=C:\OPTI930 (appended) SET SOUND16=C:\OPTI930 C:\OPTI930\SNDINIT /B SET BLASTER=A220 I5 D1 T4 3) GETTING HELP ABOUT SNDINIT.EXE You can issue the following command to get information about sndinit.exe: - SNDINIT /? 4) DOS VOLUME CONTROL TSR PROGRAM The volume control memory resident program, VOLTSR.EXE, allows you to change volume using hot keys while you are in a DOS application. The hot keys are: Ctrl-Alt-U Raises the volume Ctrl-Alt-D Lowers the volume Ctrl-Alt-M Mute For example, pressing the CTRL, ALT, and U keys will raise the volume. You need to load the TSR before you can use it. To load the TSR, type VOLTSR at the DOS prompt. 5) KARAOKE SUPPORT [for the DOS users] The Karaoke.exe program allows user to control the input volume of the microphone on the fly with "HOT KEYS." Before using Karaoke, the VOLTSR.EXE program must be successfully loaded and running. To enable Karaoke Mode, type: "KARAOKE ON" at the DOS prompt. To increase MIC input, use: Ctrl-Alt-PageUp To decrease MIC input, use: Ctrl-Alt-PageDown To disable Karaoke Mode, type: "KARAOKE OFF" at the DOS prompt. 6) CD-ROM Interface Setup Device Driver The CD-ROM Setup Device Driver is called CDSETUP.SYS. This driver sets up the interface of your CD-ROM to the MAD16 sound card. Each time you change or add a CD-ROM to your sound card. The line "DEVICE=CDSETUP.SYS..." will be added to the first line of your CONFIG.SYS file before the CD-ROM device driver line. CDSETUP.SYS is defined as follows: DEVICE=[drive:]\[directory]\CDSETUP.SYS /T:[M/S/P/I/X] /P:[addr] /I:[IRQ] /D:[DMA] [drive] = drive where you have the driver installed [directory] = directory where the driver is located [M/S/P/I/X] = M stands for Mitsumi S stands for SONY P stands for PANASONIC I stands for IDE drive X stands for disabled [address] = Port address for CD-ROM (320, 330, 340, 360) [IRQ] = Interrupt number (5,7,9,10,11) [DMA] = DMA channel (0, 1, 3) For example, the following line sets up the interface for a Mitsumi CD-ROM: DEVICE=C:\OPTI930\CDSETUP.SYS /T:M /P:340 /I:10 If you did not specify the /I or /D options, CDSETUP will automatically choose the default setting for the CD-ROM type your have specified. - For Mitsumi, the IRQ is 10 and DMA is disabled. - For SONY, they are both disabled. - FOR PANASONIC, they are both disabled. For IDE drive, you need to just specify the /T:I option. Specifying any other option in addition to this will be ignored. The I/O Port and Interrupt for IDE is located at 170H and Int 15. 7) Run DOS games in Window 95 In this release, our implemenatation has been changed to provide Demand-Driven DOS Box Game Support. There is only one DOS box that can own the audio device at one time. !! Notes !! a) Sometimes, the Setup of the PIF file of a DOS game is crucial. To make a game work effectively under Windows, you probably have to try a few alternative options through PIF editor. b) Not all the DOS games can run in Windows' DOS BOX. Some of them just don't run because of system restrictions. DOOM is one of those games failed in DOS BOX. Windows 95 provides much better DOS BOX support and DOOM is OK with Windows 95 DOS BOX.