1 You have two Sound Blaster drivers loaded in memory. Use the\nDrivers option in the Control Panel to remove one driver if you haven't already,\nand then restart your system for the changes to take effect. 2 The Sound Blaster 16 driver is not compatible\nwith your Micro Channel Architecture (MCA) Sound Blaster.\nYou should contact Creative Labs for a driver specific to your card. 4 The sound card cannot be found with this port number. Check your hardware settings, and try again. 5 You do not have a Sound Blaster 16 on your system.\nYou should upgrade your card for better results. 6 The sound card does not respond using this interrupt number. Check your hardware settings, and try again. 7 The interrupt chosen is in use by another part of the system. Change your card to use a different interrupt and try again. 16 A configuration or hardware problem has occurred.\nCheck your hardware and system settings and try again. 19 The Sound Blaster 16 driver cannot be removed because of a registry access problem. 20 You have insufficient privilege to install, remove or configure the Sound Blaster 16 driver 32 Creative Sound Blaster 16 Wave and MIDI