CD-ROM INSTALLATION LATEST INFORMATION
                 ======================================

This file contains information not available  during the  printing  of
the manual.  Please read them before you proceed with any installation 
procedure.


This file contains the following sections:

   1. Lock/Unlock Utility
   2. Errata


1. LOCK/UNLOCK UTILITY

   The new Creative CD-ROM drive has a software lock/unlock feature.
   The lock function allows you to disable the  "EJECT" button while
   the unlock function enables it.  By locking the CD-ROM  drive, you
   can prevent accidental ejection of the CD.

   The LOCKCD and UNLOCKCD utilities are provided for this purpose.

        LOCKCD.EXE     - use for locking the CD-ROM drive
        UNLOCKCD.EXE   - use for unlocking the CD-ROM drive


   i)   LOCKING THE CD-ROM DRIVE

        Usage: LOCKCD d1: [d2: d3: ... ]

        Type LOCKCD  followed by the name of the  CD-ROM  drive to  be
        locked.  More than one drive can be locked at the same time by
        typing  LOCKCD,  followed  by the  drive  names, with  a space
        separating each drive name.

        Example: To lock drives D, E and F, type LOCKCD D: E: F:

        Type LOCKCD /? at the DOS prompt for a brief on-line usage
        description.

   ii)  UNLOCKING THE CD-ROM DRIVE

        Usage: UNLOCKCD d1: [d2: d3: ... ]

        Type UNLOCKCD  followed by the name of the CD-ROM  drive to be
        un-locked.  More than  one drive can be  unlocked at the  same
        time by typing  UNLOCKCD, followed  by the drive names, with a
        space separating each drive name.

        Example: To unlock drives D, E and F, type UNLOCKCD D: E: F:

        Type UNLOCKCD /?  at the DOS prompt for a brief on-line usage
        description.


2. ERRATA

   Note : If you cannot find the following errors in your manual,
          please ignore this section.

   CD-ROM Drive User's Guide

   Chapter 4-4, line 5.
   "dragging the slider with the mouse" has been changed to 
   "click the left or right mouse  button to increase or decrease 
   the volume". 

   Appendix A-3, line 13.
   "Access Time : 350 Msec (Normal Velocity) and 450 Msec (Double
   Velocity)" has been changed to
   "Access Time : 320 Msec (Normal Velocity) and 350 Msec (Double
   Velocity)"

    CD16 Getting Started

    Pg 3, line 13.
    "Base I/O Address : 220H to 233H" has been changed to
    "Audio interface I/O addresses : 220H to 233H"

                      ********** End of README.TXT **********