FLASH Memory Update Utility Release 3.0

This utility is used to save and update FLASH memory. It is recommended
that this utility be executed from a bootable MS-DOS diskette that 
contains BIOS recovery files for the target system.  

This utility must be executed in a system without memory managers installed.
If EMM386, QEMM, 386MAX, or Windows is active, then the FLASH update
is not safe.  Remove any memory manager or exit Windows before executing
the FLASH Memory Update Utility.

It is strongly recommended that you record your CMOS SETUP parameters before
updating the BIOS and set the CMOS parameters to default values after the
update is complete.  You can set the CMOS parameters to default values by
entering SETUP and hitting the <F5> key.  The CMOS memory map may change
from BIOS version to BIOS version, setting the parameters to default values
will guarantee the CMOS memory is updated correctly.


SHOWHDR.EXE:  This tool is provided to display header information on the
specified FLASH data image.  

Usage: SHOWHDR.EXE <FLASH data image filename>