TITLE:      Port Set Incorrectly For a Network Printer
PRODUCT:    WordPerfect 5.1 for DOS


Problem
Your document fails to print when you send it to the network
printer.


Concept
When you use a network printer, your computer sends print
information through a cable at the back of your computer to the
network.  The location where the cable connects to your computer
is called a port.  You must select the correct network and
printer port in WordPerfect.

Note:  The 05/31/91 Install program prompts Is this a Network
Printer? if you have installed WordPerfect on a network other
than Novell.  You are able to set up a network printer from
Install without having to edit the port later.


Solution
Select the correct network printer port.

For WordPerfect 5.0 or 5.1 on a Novell network version 2.15 or
above,

1     Choose O for Other.

2     Type PRINTQ_0 for a Novell network.
      
            or

      Type SERVER/PRINTQ_0 for an attached named file server.

For WordPerfect 4.2, WordPerfect 5.0 before 11/15/88, or a Novell
version before 2.15,

1     Choose O for Other.

2     Type the device number (0-4).

For non-Novell network users, 

1     Set the port to LPT1 or LPT2 for the network to capture the
      port.

2     Start WordPerfect.

3     Press Print (Shift+F7), then choose Select (S).

4     Edit the port, then answer Yes when prompted Is this a
      Network Printer?.


See Also
     Appendix O: Troubleshooting in the WordPerfect 5.1 for DOS
reference manual
     Appendix R: Networking WordPerfect in the WordPerfect 5.1
      for DOS reference manual