________________________________________________________________

     Using Windows 3.0 with your NEC Pinwriter

     SOFTWARE: MICROSOFT WINDOWS 3.0 & APPLICATIONS
     DEVICES:  NEC 24-PIN PINWRITERS
     VERSION:  DRIVER VERSION 1.37
     CREATED:  03/8/91

     The following files are included for using your NEC Pinwriter
     with Windows version 3.0.  This driver should replace all earlier
     versions available from NEC.

     NECPNSER DRV       Windows 3.0 Pinwriter driver
     NECPNSER HLP       Help file for Windows 3.0 Pinwriter driver

     This printer driver is supplied for use with Microsoft Windows
     3.0, and will function correctly only when used with an NEC
     24-pin Pinwriter.

     If your printer is a color model, or has a color option kit
     installed, full color output is available.

     INSTALLATION

     Follow the procedure for installing any new printer via the
     control panel.  Select the ADD PRINTER option from the printer
     menu of Control Panel, go down the list of available printers
     until UNLISTED PRINTER shows.  Type INSTALL, and double click
     on the name of the drive containing this diskette.  Double click
     on the filename NECPNSER.DRV and the printer driver will then be
     copied to the subdirectory \SYSTEM of your Windows directory.
     The NEC 24-pin option is then selectable from the list of
     INSTALLED PRINTERS.

     Please note that the NEC driver has been written to provide
     online help on request.  Control Panel does not copy the help
     file, so you will need to copy it manually if you wish to make
     use of help.  You can do this by copying the file NECPNSER.HLP
     to the subdirectory \SYSTEM of your Windows directory.  Do this
     in File Manager, or from DOS as follows (assuming the driver
     diskette is in drive A: and Windows is in directory C:\WINDOWS):

        COPY A:NECPNSER.HLP C:\WINDOWS\SYSTEM

     SETUP

     Click on the NEC 24-pin followed by the CONFIGURE button.  Select
     a suitable port, and then click on SETUP.  At this point, you are
     in the NEC Pinwriter driver setup menu.

     First select OPTIONS, and then set the PRINTER TYPE to your
     model.  There are many other options available to you, which are
     explained fully in the online help.  However, for best general
     purpose printing and good all-round results, we suggest the
     following settings:

        Color Optimisation:     Paper Half Tones
        Exact Char position:    ON
        GDI Underline:          ON
        Text Quality:           Letter
        Bitmap Resolution:      Medium (180 x 180)

     ________________________________________________________________


     ________________________________________________________________

     LIMITED WARRANTY DISCLAIMER

     NECTECH does not warrant that the functions contained in
     the Licensed Program will meet your requirements or that
     the operation of the licensed Program will be uninterupted
     or error free.  THE LICENSED PROGRAM IS PROVIDED TO YOU
     "AS IS" WITHOUT WARRANTEE OF ANY KIND, EITHER EXPRESSED OR
     IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
     PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND
     PERFORMANCE OF THE LICENSED PROGRAM PROVE DEFECTIVE YOU
     ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR
     OR CORRECTION.  Some states do not allow the exclusion of
     implied warranties, so the above exclusion may not apply to
     you.

     LIMITATION OF REMEDIES

     IN NO EVENT WILL NECTECH BE LIABLE TO YOU FOR ANY DAMAGES,
     INCLUDING ANY LOST PROFITS, LOST SAVINGS, INDIRECT, SPECIAL,
     LOST DATA, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR OF ANY
     CLAIM BY ANY OTHER PARTY.  Some states do not allow the
     limitation or exclusion of liability for incidental or
     consequential damages so the above limitation or exclusion
     may not apply to you.

     ________________________________________________________________

     ACKNOWLEDGEMENTS

     Microsoft and Windows are registered trademarks of Microsoft
     Corporation.
     Pinwriter, Silentwriter, Silentwriter2, and Colormate PS are
     registered trademarks of NEC Corporation.
     PostScript is a registered trademark of Adobe Systems Inc.

     Both Windows 2.X and 3.0 Pinwriter Drivers NECPNSR2.DRV and
     NECPNSER.DRV are Copyright (C) 1989,1990 NEC Deutschland GmbH.
     All Rights Reserved.

     Distributed by NEC Technologies, Inc.
                    1414 Massachusetts Ave.
                    Boxborough, MA. 01719